Tenders Are Invited For Improving The Functioning Conditions Of The City Cultural Center Through Renovation And Equipment Of The Rooms

The Scope Of Construction Works Covered By The Contract Award Procedure Includes: 1. Disassembly Of Water And Sewage Equipment And Electric Heaters And Central Heating Radiators, 2. Chipping Off The Existing Wall And Floor Tiles, 3. Demolition Of Partition Walls With Disassembly Of Door Joinery, 4. Demolition Of Concrete Floors And Substrates Along With Deepening The Rooms And Making New Insulated And Insulated Floors, Installation Of Sewage Systems In The Ground, Assembly Of Cold And Hot Water Installations In The Floor Layers, 5. Preparation Of Substrates And Installation Of Wall - To The Ceiling - And Floor Tiles, 6. Execution Of A New Electrical Installation With Installation Of Economical Led Lighting, Replacement Of Central Heating Pipes And Radiators With Aluminum Three-Chamber Type 500 10- Member.7. Cabins Made Of Hpl Boards Mounted On Metal System Feet 15 Cm High, Walls 200 Cm High, Doors Made Of Hpl Boards Closed With A Bathroom System.8. Utility Water Heating Medium - Hot Utility Water Exchanger Installed In The Basement In The Central Heating Unit Room. – Can. New With Valid Certificates And Approvals For Use In Public Buildings.9. Insulation Of The Utility Room By Building Walls Of Aerated Concrete, Gr. 11.5 Cm, Thickening The External Walls, Making A Suspended Ceiling Of Gkbi Boards Insulated With Mineral Wool, Gr. 10 Cm. Demolition Of The Existing Floor, Disassembly And Widening Of The Door Opening Will Be Carried Out In The Room. Execution Of The Room As An Adjoining Womens Bathroom. 10. Installation Of Equipment For The Disabled. The Equipment Should Have Valid Attestations And Certificates For Use In Public Utility Facilities. In The Bathroom For The Disabled And In The Entrance Door To The Womens Bathroom, There Must Be No Threshold Limiting The Access Of The Disabled.11. Supplementation Of The Tile Floor - After Openings In The Corridor. 12. Cleaning And Painting The Entrance Doors To The Offices, The Restrooms And The Basement. 13. In The Corridor, Walls Prepared For Plastering, Plastering, Painting With Emulsion Paints And Varnishing With Acrylic Varnish Up To The Height Of The Door. The Ceiling Was Putty And Painted With Emulsion Paint. 14. Cleaning, Spackling And Painting The Doors With Jambs To The Performance Hall With Oil Paint.15. In Offices, Replacement Of Worn Floor Covering With Floor Panels Of Class Ac 4 Gr. 7 Mm Laid On Base Plates. The Ceilings And Walls Of The Rooms Were Prepared And Puttied And Then Painted With Emulsion Paint, And The Walls Were Additionally Varnished With Acrylic Varnish Up To The Height Of The Top Of The Door. Implementation Of A New Electrical Installation. Installation Of Single-Chamber Sinks With A Draining Plate Made Of Stainless Steel Along With The Cabinets On Which They Will Be Mounted. Painting The Windows.