Bids Are Invited For Occasional And Future Acquisition Of Parts, Maintenance Of Brushcutters And Grass Cutting/Mowing Equipment, As Requested By The Municipal Secretary Of The Environment, Of This Municipality

Hand Protection, Compatible With Ms-381 Chainsaw, Jg. Seal Gasket., Compatible With Ms-381 Chainsaw., Labor For Ms-381 Chainsaw, With Specialized Mechanic, Proven Upon Presentation Of Course Certificate., Chain Saw Chain 3/8 X 1, 60Mm, Piston 52Mm, 07/26/2023, Centrifugal Counterweight, Outlet Exhaust, Fuel Hose, Spark Plug, Cylinder Drum W/ Piston 52Mm, Housing Vent., Air Filter, Saber 40 Cm, Pinion Roller 3/8 7D, Round File 5, 2 X 200, Oil 2 Time 8017 500 Ml Mixture 50:1, Manpower For Chainsaw Ms-170, Cylinder W/ Piston 37 Mm, Compatible With Chainsaw Ms-170., Carburetor, Muffler, Filter Housing, Tank Cover, Ignition Module, Jg Carb Parts., Ignition Plug, Pinion 3/8 Picco 6D, Saber 30 Cm, Chainsaw Chain 3/8 1, 10 Mm Mini, Housing Crankshaft, Recoil Spring, Compatible With Brush Cutters Fs-220 And Fs-290., Coupling Part, Turntable Plate , Cylinder With 38Mm Piston, Compatible With The Fs-220 Brushcutter., Cylinder With 40Mm Piston, Compatible With The Fs-290 Brushcutter., Crankshaft, C1s Carburetor, Air Filter, Traditional Filter, Filter Cover, Hose, Clutch, Clutch Drum, Compatible With The Fs-220 And Fs-290 Brushcutter, Cable Of Accelerator, Pulley Part., Start Cover, Housing Of Tank, Manpower For Brushcutter Fs-220 And Fs-290, Transmission Shaft, Tube Axis 28Mm, Double Strap, Shock Absorber, Protection Glass, Leg Protection, Spherical Bearing, Retainer, Compatible With Brushcutter Fs-290, Needle Cage, Membrane Of Reg., Membrane Bomb, Jg. Parts Carburetor, Suction Head, Nylon Cutting Wire 3, 0Mm., Trimcut 41-2, Oil 2 Time 8017 500 Ml. Mixture 50:1, Compatible With The Fs-350 Brush Cutter, Cylinder Joint, Silent Sealing Gasket, Bearing, Receipt Spring, Drive Shaft, Labor For The Fs-350 Brush Cutter, 25 4Mm Axis Tube, Compatible With The Ht-75 Power Cutter, Compatible With The Ht-75 Power Cutter. Fan Side, Compatible With Motopoda Ht-75. Starter Side, Oil Pump, Cylinder W/ Piston, Labor For Ht-75 Power Cutter, Chain 3/8 1.10Mm, Bar 30Cm, Chain Pinion 3/8, Side Cutter With Gasoline Engine 2-Stroke, With Displacement Below 35.5Cc And Power Equal To Or Above 1.7 Kw Or 2.3 Cv, With Route Maximum Speed Of 12,500 Rpm. And Minimum Rotation At Slow Of 2,800 Rpm, With Fuel Tank Capacity Below 0.60 Liters, Which Has Multifunctional Cable And Anti-Vibration System Double Support Belt, Protective Glasses, Reel Of Nylon Wire (Trimcut) And Warranty For Manufacturing Defect Of 02 Years, Being The Responsibility Of The Supplier The Referral For Warranty Or Replacement. Present Catalog With Technical Data, Blower With Gasoline Engine That Uses 4-Mix Technology That Ensures Low Fuel Consumption And Low Emission Of Pollutant Gases, Equipped With Anti-Vibration System And Padded Shoulder Belt, Multifunctional Command And Bike Cable And Blowing Force Equal To Or Above 32(N). That Has An Engine With Power Equal To Or Above 3.0 Kw Or 4.0 Hp And Displacement Below 65.0 Cc., Maximum Rotation Of 7,300 Rpm. And Minimum At Slow Of 2,500 Rpm., Maximum Sound Pressure Of Db(A)² Of 100 And Sound Power Db(A)² Of Maximum Of 107, Fuel Tank Equal To Or Above 1.40 Liters, With Minimum Warranty Of 01 Year For Manufacturing Defect, Being The Supplier Responsibility For Warranty Or Replacement. Submit Catalog With Technical Data., Grass Cutter, Manual Advance, Minimum Requirements: Power Of 6.5 Cv At 3600 Rpm, Common Gasoline, Co