Tenders Are Invited For Purchase And Delivery Of A Slurry Tanker To Service Household Sewage Treatment Plants

The Subject Of The Contract Is The Purchase And Delivery For The Needs Of The Employer Of One Complete New Factory Slurry Tanker (Manufactured In 2023) To Service Household Sewage Treatment Plants, Equipped With At Least: Chassis: Acceptable Max. Total Weight 9.0 Tons, Permissible Front Axle Load Min. 3 Tons, Rear Axle Min. 5.8 Tons. Brand New Chassis: Minimum Production Year 2023, Two-Axle With Rear Wheels In A Twin Arrangement. Wheelbase Max. 3.400 Mm. Engine: - Engine Power Min. 170 Hp, - Engine Meeting Exhaust Emission Standards In Accordance With Applicable Regulations, Min. Euro 6,- Automatic Or Automatic Gearbox With The Possibility Of Changing Gears In Automatic/Manual Mode, Rear Axle Equipped With: - Rear Axle Stabilizer, - Differential With Increased Friction. Braking System: - Front And Rear Axle Brake - Disc, - Braking System Min. With Abs And Esp. Steering System: - With Power Steering, - Steering Wheel With Adjustable Height And Tilt, And Airbag. Electrical System: - Speed Limiter Up To 90 Km/H, - Daytime Running Lights, - Electric Windows, - Emergency Brake Assist, - Lane Keeping Assist, - Hill Start Assist. Fuel Tank Min. 100 Liters With A Lockable Plug, Wheels: - Wheel Rims With Min. 17, - Rear Axle Tires - Traction Tread, - All Vehicle Tires From One Manufacturer, - Spare Wheel With A Tire Of The Same Type And Manufacturer As The Vehicle Tires, Cab That Meets The Requirements And Is Equipped With: - Three-Seater, - Cab Color White, - Tiltable, - Comfortable Drivers Seat With Adjustable Vibration Damping And Armrest, - Heated Rear-View Mirrors, - Air Conditioning, - Lighting In Accordance With Applicable Traffic Regulations, - Warning Lamps With Yellow Shades On The Cab Roof, - Central Remote Control Lock, - Two Sets Of Keys (2 Keys With Remote Control), - On-Board Computer, - Digital Tachograph, - Immobilizer, - Sun Visor In Front Of The Windshield, - Radio. 3,000 Liters Divided Into: - Waste Chamber With A Capacity Of Min. 2,000 Liters, - Pure Technical Water Chamber With A Capacity Of Min. 1,000 Liters. The Drain Valve On The Tank Cover Is Placed In 1/3 And 2/3 Of Its Height. The Tank Can Be Connected With A By-Pass Valve, Which Allows To Increase The Total Capacity Of The Clean Water Tank To 3,000 L. Equipped With Suction Valves Ø 75 Mm And Drain Valves Ø 75 Mm, Warning Lamp With A Yellow Shade Located At The Rear Of The Body. Rinsing Nozzles Inside The Tank To Facilitate Its Emptying. A Beam Protecting The Vehicle From Driving Into An Obstacle From Behind. Waste Tank Filling Level Indicator. Space In The Front Part Of The Building. Access To The Space Is Closed With Roller Shutters Rolled Up, Min. 1100 Mm For Free Access During Service Work And Locked With A Key With A Front-Authorized Access. Vehicle Height After Building Up Max. 2.50 M. Length Of The Vehicle After Building Up Max. 6.5 M. Drive System: Independent Industrial Diesel Engine With A Power Of Min. 35 Kw With An Electric Starter, Equipped With An Hour Meter. Suction System: Liquid-Cooled Vacuum Pump With Min. Parameters: 0.85 Bar Suction, 0.5 Bar Discharge. Pump Capacity Min. 720M3/H. The Pump Is Driven By A Magnetic Clutch Enabling It To Be Switched On And Off From The Control Panel. Hand-Operated Rotary Drum For Storing The Suction Hose, Placed Vertically On The Side Of The Tank. A Suction Hose With An Internal Diameter Of Dn 75 Mm And A Minimum Length Of 15 M Is Mounted On The Drum. The Pump Is Driven By A Magnetic Clutch Enabling It To Be Switched On And Off From The Control Panel. Protection Of The Pump Against Dry Running. The Drum For The Pressure Hose Is Hydraulically Rotated Through A Chain Transmission (Reeling/Unwinding The Pressure Hose) With Smooth Speed Regulation In Both Directions, Located On The Rear Part Of The Vehicle. Pressure Hose Dn 13 Mm And Min. 100 M. ½ Fitting. Drum (Shields Composed Of 12 Elements To Stiffen And Strengthen The Structure) Made Of Stainless Steel, Equipped With A Self-Returning Screw Mechanism For Automatic Laying Of The Dn 13 Hose, Synchronized With The Rotation Of The Pressure Drum. The Customer Requires That It Is Possible To Work Both Pumps / Suction And High Pressure / Simultaneously. A,- Conical Unblocking Head,- Roller Guiding The Upper Hose,- Protective Hose,- High-Pressure Gun With A Lance. Operating Hours, - Low Oil And Water Level Signal, - Unwinding/Retracting The Pressure Hose With Speed Control, - Work Lamp On/Off Switch, - 12 V Socket. With A Charger And Two Batteries. It Should Be Able To Be Physically Disconnected From The Vehicle When Not In Use. Additional Requirements: Full Anti-Corrosion Protection Of The Bodywork. A Set Of Additional Suction Hoses, Min. 3 Pcs. And A Suction Pipe With A Crusher Of Hard Sediments. Drain Spout Made Of Stainless Steel. A Handle Holding Traffic Cones. The Building Is Equipped With A Lockable Container For Accessories On The Right And Left Side Of The Vehicle. Container Made Of Aluminum Adapted To The Dimensions Of The Body. Information Board On One Side Of The Tank Made Of Aluminum. Water Circulation System Enabling Operation In Conditions Of Negative Temperatures (Down To -50 C) Lighting Of The Rear Operators Workplace (Halogen Lamp). Descriptions On The Control Panel And The Entire Body In Polish (Regarding The Operation Of The Device). The Offered Vehicle Cannot Be A Prototype. The Offer Must Be Accompanied By References From The Delivery Of At Least 3 Special Cars With An Independent Internal Combustion Engine Driving The Work Of The Superstructure, Documented With Reference Letters Issued By Polish Users In The Last Three Years Before The Deadline For Submitting Tenders, And If The Period Of Business Is Shorter - During This Period. Registering The Vehicle As A Special Vehicle. In Addition, The Ordering Party Requires Training At The Contractors Expense For The Employees Of The Ordering Party In The Use Of The Delivered Vehicle - Min. 2 Working Days With The Use Of The Vehicle Being The Subject Of The Contract. Important Information: • A Complete Vehicle With A Minimum Of 85% Water In The Working Tanks Of The Superstructure, Together With Accessories And Service, Must Not Exceed The Permissible Total Weight And The Permissible Axle Loads Specified In Polish Regulations. For Road Traffic. The Car Must Meet Polish And European Safety Requirements And The Requirements For Driving On Public Roads, In Accordance With The Provisions Of The Act Of June 20, 1997 - Road Traffic Law (Journal Of Laws Of 2021, Item 450, As Amended). The Car Must Have A Homologation Issued In Accordance With The Provisions Of Chapter 1A Of The Act Of June 20, 1997. .Pos. 450 From Late As Amended). The Contracting Authority Requires The Contractor To Have At Least One Service Station Of Its Own Or Authorized By The Contractor Located In Poland. Poznańska 8A, 66-520 Dobiegniew.