Delivery Of A Skidding Trailer With Additional Equipment. General Requirements: 1. Brand New Trailer, 2. Year Of Manufacture 2023. Operating Requirements:1. Place Of Work Flat And Upland Areas, 2. Designed To Work With Wheeled Tractors With An Engine Power Of Up To 220 Hp,3. Expected Service Life 10 Years. Required Technical Parameters Of The Chassis:1. Permissible Total Weight: Min. 14000 Kg, Max. 19000 Kg,2. The Length Of The Loading Space Is Not Less Than 4.0 M With The Possibility Of Extending It By Not Less Than 0.8 M,3. Type Of Stanchions: Classic (Bent): 8 Pairs,4. The Bracket Of The First Pair Of Stanchions Mounted To The Grille,5. Possibility To Register For Road Traffic / Homologation,6. Number Of Hydraulically Driven Axles: Minimum 1.7. Type Of Supports: Hydraulically Unfolded From The Tractor Cabin,8. Tire Size: Minimum 22.5, Minimum Width 550 Mm,9. Pneumatic Brakes: On 2 Axles, 10. Drawbar For Lower Hitch,11. Parking Foot On The Drawbar,12. Rear Lighting On A Folding Beam In Accordance With The Requirements Of The Road Traffic Act,13. Hydraulic Unit Mounted On The Trailers Drawbar,14. Ls Hydraulic Pump (Variable Geometry),15. Power Take-Off Shaft With Adjustable Length Included,16. Electric Oil Cooler Switched On From The Tractor Cabin,17. High Pressure Hydraulic Oil Filter,18. Cover Of The Hydraulic Pump And The Multiplier. Required Technical Parameters Of The Hydraulic Crane.1. The Working Range Of The Crane Is Not Less Than 10 M2. Gross Lift Capacity At Maximum Reach: Minimum 600 Kg,3. Gross Lift Capacity At 4 M: Minimum 1600 Kg,4. Electronic Control Of The Crane On Mini Joysticks Mounted On The Tractors Exact Armrests,5. Control Supported By A Touch Screen Showing The Current Settings / Parameters Of The Crane (With Polish Menu),6. Ability To Set Operating Modes For Each Operator Along With Their Memorization,7. Ability To Control Additional Functions Of The Trailer And The Crane (Switching The Drive, Led Lights, Etc.) From The Armrests,8. Led Working Lights In A Cover On The Crane,9. Two-Way Sling Brake,10. Hydraulic Accumulators On Rotation And Lifting To Prevent Pressure Surges,11. Central Lubrication Of The Crane,12. Crane Column Rotation Not Less Than 360 Degrees,13. Gripper With A Minimum Grip Area Of 0.28 M2. Additional Equipment: 1. Gripper For Bulk Materials With A Minimum Capacity Of 200 L.2. Knife Gripper For Biomass With A Minimum Cutting Diameter Of 18 Cm. Documentation Required Before Delivery: 1. Operation And Maintenance Manual In Polish.2. Service Book.3. Warranty Card.4. Catalog Of All Spare Parts In Electronic Or Paper Version.5. Approval Of The Trailer And Crane By Udt. Warranty And Post-Warranty Service Conditions:1. The Guarantee Is Provided By The Contractor For A Period Of Not Less Than 12 Months From The Date Of Signing The Final Acceptance Report,2. The Contractor Shall Provide A Free Warranty Technical Service With Reaction On The Spot Of The Trailers Failure,3. The Maximum Response Time Of The Service To A Failure Is 24 Hours (I.E. Time Understood From The Moment Of Accepting The Notification To The First Repair Works),4. The Warranty Provided Covers Physical And Legal Defects Of The Sold Item Within The Meaning Of The Provisions Of The Civil Code,5. The Contractor Is Obliged To Indicate An Authorized Representative To Provide Comprehensive Warranty And Post-Warranty Service And To Secure Spare Parts. Training: 1. At The Place Of Delivery Of The Trailer Indicated By The Employer, The Contractor Shall Conduct Training For Two Trailer Operators In The Field Of Operation, Work Safety And Maintenance, 2. Duration Of The Training - One Working Day Divided Into A Theoretical And Practical Part.
