Tenders Are Invited For Superstructure, Reconstruction Of The Building Of Sanatorium Oblęgorek Along With The Change Of The Use Of The Unusable Attic Into Guest Rooms And Extension Of The Building With An Elevator Shaft

1.1 The Subject Of The Order Is The Performance Of The Task Entitled: Superstructure, Reconstruction Of The Building Of The Sanatorium Oblęgorek With The Change Of The Use Of The Unused Attic Into Rooms For Stays And The Extension Of The Building With An Elevator Shaft. The Task Is Co-Financed By The State Fund For Rehabilitation Of The Disabled. Sanatorium Oblęgorek ” Is A Building Entered In The Register Of Monuments. 1.2. The Scope Of The Investment Includes: Demolition And Demolition Construction Works, Which Will Include: - Disassembly Of The Existing Floors In The Rooms Subject To Reconstruction (According To The Drawing); - Demolition Of Part Of The Existing Partition Walls (According To The Drawing); Elevator With Railings;– Cutting Out Door Openings In The Existing External Wall At The Designed Lift Shaft;– Cutting Grooves In The Walls For Embedding Steel Lintels;– Disassembly Of Window And Door Woodwork (In Connection With The Planned Investment);– Disassembly Of Bathroom Fittings And Chipping Of The Wall Lining And Floor Of The Bathroom Rooms Intended For Reconstruction; - Disassembly Of The Existing Roofing Made Of Galvanized Flat Steel Sheet Joined With A Standing Seam - Demolition Of The Wooden, Purlin And Tick Roof Truss Structure - Protection Of The Ceiling And External Walls Of The Last Floor - Disassembly Of The External, Forged Balustrade Of The Belvedere With Its Foundation And Cornice - Disassembly Of The Roofing And Structure, Belvedere, Inventory Of The Original Structural Elements - Demolition Of The Reinforced Concrete Ceiling Over The Staircase, Including The Disassembly Of The Smoke Damper - Disassembly Of Two Wooden Staircases Based On Landings - Demolition Of Two Sectional Staircase Landings, On Steel Beams - Unforging The Door Openings To Widen The Door To The Required Width Of 90 Cm On The Ground Floor, First Floor, Second Floor - Other Demolition And Accompanying Works; - The Inscription Oblęgorek Should Be Removed And Reinstalled. Preparatory Construction Works Will Include: - Priming With Preparations Grounding; - Relocation Of Internal Hydrants; - Other Preparatory Works; Construction And Finishing Works Will Include: - Construction Of An Elevator Shaft For Four Storeys - Reinforced Concrete Structure; - Installation Of Roof Gutters And Downpipes; - Execution Of Cornices In Relation To The Existing Ones On The Building In Question ( Cornice Made Of Wool);– Superstructure Of The Staircase Walls To A Height Of Approx. 2.3 M, External Wall Thickness 24 Cm, Walls Made Of Cellular Concrete Blocks On Thermal Mortar, Mineral Wool Insulation 15 Cm– Construction Of A Monolithic Reinforced Concrete Ceiling, Poured Over The Staircase – Execution Of Two Flights And Two Cast-In-Place Monolithic Reinforced Concrete Landings - Installation Of A 120X120cm Smoke Damper - Reinforcement Of The Existing Ceiling Over The Second Floor - Superstructure Of The Existing Chimneys - Execution Of Hybrid Ventilation - Delivery And Assembly Of A Four-Stop Lift - Bricking Up Window Openings In The Outer Wall In Accordance With The Drawing; - Completion And Execution Of New Internal Cement-Lime Plasters On Supplemented And Designed Walls; - Laying Of Partition Walls (Acoustic Insulation Made Of Mineral Wool, According To The Drawing); Up To A Height Of Min. 2.05 M In The Bathrooms On The Ground Floor, First Floor, And Second Floor;– Execution Of The Wall Cladding Of The Hygienic And Sanitary Rooms - Tiles Up To The Ceiling Height In The Bathrooms In The Attic;– Execution/ Supplement Of Terracotta Tiles In The Hygienic And Sanitary Rooms;– Insulation Of The Elevator Shaft Made Of Wool With The System Plaster; – Installation Of Suspended Plasterboard Ceilings; – Painting Of Walls And Ceilings In The Building (New And Reconstructed Rooms); – Installation Of Bathroom Fittings With Handles For The Disabled;– Installation Of Internal Door Joinery, In Accordance With The Manufacturers Recommendations; – Works Resulting From The Modernization Of Sanitary And Electrical Installations; – Other Construction And Finishing Works; Carpentry And Construction Works Related To The Implementation Of The Attic: – Construction Of A New Roof Truss And Roof Layers In Accordance With The Descriptions In The Drawings – Reconstruction Of The Belvedere Structure – Based On Inventoried Elements And Execution Sheathing While Maintaining The Designed Structural Layers - Renovation / From The Inside / Of The Brick Wall Of The Belvedere Dormer, Plastering And Embedding The Window - Renovation And Assembly In Accordance With The Description Of The Belvedere Balustrade - Construction Of The Dormer On The Eastern Side, Including: Bricklaying And Insulation Of The Front Wall Of The Dormer, Construction Of Side Walls In A Light Structure As Described - Implementation Of Roofing Made Of Flat Titanium-Zinc Sheet Joined With A Standing Seam With A Spacer Made Of A Structural Mat. Execution Of Roof Layers According To The Design - Execution Of Partition Walls, Thickness. 12Cm And 8Cm And Suspended Ceilings Made Of Fire Plasterboards Filled With Mineral Wool - Construction Of Roof Structure Elements And Existing Chimneys Made Of Fire Plasterboards Up To Ei30 Resistance - Construction Of Floor Layers And Floors Made Of Jointless Pvc Coverings - Embedding Window Joinery Of Wooden Roof Windows Covered With Sheet Metal And Classic Windows Dormers - Mounting Of Door Joinery, Including Ei 30 Resistance - Manufacturing And Mounting, After Agreement With The Employer, An Information Board With Dimensions Of 80X120 Cm Made Of A Composite Board, Plexiglass Or Pvc With A Minimum Thickness Of 3 Mm, In Accordance With The Guidelines Set Out In The Council Regulation Of Ministers Of 7 May 2021 On Defining Information Activities Undertaken By Entities Carrying Out Tasks Financed By Entities Carrying Out Tasks Financed Or Co-Financed From The State Budget Or State Earmarked Funds (Journal Of Laws Of 2021, Item 953),1.3 . A Detailed Description Of The Subject Of The Contract Is Included In The Following Documents: A) Design Documentation, Which Is Attached To The Swz No. 8, Containing: - Construction Design And Industry Designs, - Technical Specification For The Execution And Acceptance Of Works, B) Bill Of Quantities, Which Is Attached To The Swz No. 9C) Draft Agreement Constituting An Appendix To The Tor No. 7D) Supplementary Information That Is An Appendix To The Tor No. 10 The Bill Of Quantities Attached To The Tor Is For Information Purposes Only. The Contractor, Having Familiarized Himself With The Design Documentation And Other Documents As Well As This Tor, Is Obliged To Determine The Scope Of Works Necessary To Achieve The Result.