Bids Are Invited For Acquisition Of Machinery And Equipment For The Slaughterhouse In The Municipality Of Itaporanga – Pb.

Winch For Lifting Pigs. Purpose: Lifting Pigs Onto The Rail After Scalding And Depilation. Construction: Base In Folded Sae 1020 Steel Sheet Of 3/16”, Spool In Tube Din 2440, Side Discs And Shafts Mounted In Bearing Bearing And Standard Coupling, Activation By Speed ​​Reducer, Coupled To The Spool And Electric Motor Of 03 Hp , With Transmission By Pulleys And Belts. Note: Comes With Ø 5/16” Steel Cable Winch And Guide Pulley W/ Buzzard Beak., Tank For Scalding Pigs W/ Fork. Steam In Steel 1020 (1500 X 1800 X 1000 Mm). Purpose: Immersion Scalding Pigs. Construction: In Sae 1020 Steel Plate Of 1/8 And Reception Table, Reinforcement Frame In Angle Of 2”X ¼”, With Feet In Tube Of 2”, Withdrawal Fork In Flat Iron Of 1.1/2”X 3 /16”, Having Shaft With Bushing Bearings And Lateral Rods With Counterweight. Heating Through Steam From The Boiler Turns Into A Tubular Network Connected To The Injector Nozzles That Are Part Of The Tank., Table For Swine Retouching (1800 X 2000 X 700 Mm) Purpose: Reception Of Animals And Shaving Of Hair Not Removed By The Machine. Entirely Made In 1 ½” Galvanized Din 2440 Tube, Machine For Depilating Pigs – 60 Pigs/Hour (Semi Aut.) Purpose: Depilation Of Pigs. Construction: Double “U” Profile Structure Folded In 1/8” Sheet Metal, With 1/8” Sheet Metal Coating, Central Shaft Mounted On Bearing Bearings Having Four Rubber Rows With 16 Sets Of Scraper Nails Each, Shaft Superior With Swine Retention Grid And Opening Lock For Exit After Depilation, Activated By 5 Hp Motor Total Height 2400 Mm; Total Width 1600 Mm; Total Length 2600 Mm., Box For Stunning Pigs/Goats In 1020 Steel (1600 X 900 X 2000 Mm) Purpose: Intended For Immobilizing Pigs/Goats For Stunning. Made Of Sae 1020 Steel Profiles With Tilting Sides And Bottom For The Exit Of Stunned Animals. The Lateral And Tilting Bottom Will Return To Their Initial Position Through A System Of Counterweights. Finishing In Metallic Paint On Anticorrosive Background., 07/11/2023, Swine Stunner Purpose: Stunning Swine P/ Later Bleeding. Construction: Stick In Stainless Steel Or Pvc, With Tips Also In Stainless Steel, Connected To The Electric Control Panel Through A Cable. Control Panel With Switch To Regulate Voltage. Shock Duration Time From 0 To 30 Seconds., Table For Swine Sangria With Gutter. Table In Stainless Steel Tube Of 2, With Feet In Metalon Stainless Steel Of 50 X 50 Gutter Made Of Stainless Steel Aisi 304 Of 1.5 Mm, With Outlet For Water And Waste, Sanitary Finish For Blood Collection, Measuring 2000 X 1800 X 800 Mm ., Rockers For Pigs/Goats (Stainless Steel). Purpose: Hanging Pork Carcasses On Reels For Their Handling In Air Tracking Made In Stainless Steel Profiles Ø ½”. 110 Mm Ø, Pins In Sae 1020 Drawn Steel Of 5/8”, Swivel Eyelet In Sae-1020 Steel Of ½” Galvanized, And Hook In Stainless Steel Aisi-304 Of Ø 5/8”, Scoring Platform (760X1000x2000mm ) Purpose: Scorching Pigs, Metallic Platform With Stairs And Handrails In 1” Turbo And Feet In 6” Tubes, Floor Made Of Sae-1020 Steel Plate 3/16” Non-Slip Checkered, Galvanized Finish.