Tenders Are Invited For Construction Works Related To The Renovation Of Walls And Installation Works As Part Of The Task Modernization Of The Gymnasium At Primary School No. 1 In Nowogród Bobrzański, Ul. Marcinkowskiego 2

3. Specification Of The Subject Of The Contract: The Subject Of The Contract Is The Modernization And Renovation Of The Gym Consisting In The Performance Of Construction And Installation Works, Including: A) Plasters - Scraping Off, Washing Off The Old Emulsion Paint On The Walls And Ceilings, Preparing The Old Plasters For Painting Along With Supplementing The Unevenness And Placing Two Layers Of Putty, Priming. The Above Activities Should Be Carried Out On The Area Of ​​Approx. 1044.47 M2, - Bricking Up The Walls With Corrugated Panels, - Bricking Up The Ceiling Furrows And Holes Left By The Roof. Fans, - Painting The Ceiling And Walls Twice With Emulsion Paint With An Area Of ​​Approx. 536.36 M2, - Painting The Walls Twice With Latex Paint With An Area Of ​​Approx. M2, - Installation Of A Polyurethane Foam Bumper, 10 Cm Thick And Approx. 2 M High, On Corners And Walls With An Area Of ​​Approx. 61.16 M2b) Electrical Installations - Digging Grooves For Plug-In Wires In The Brick Base - Approx. 130.8 M., - Preparation Of The Site And Assembly Of Ts Switchgears, Item 2. - Laying Of Smooth Vinidur Pipes, Type Rl, With A Pipe Diameter Of About 20 Mm - Length Of About 253 M. - Laying Of Power Cables, E.G. Scoreboard, Curtain Motor - Length 360 M. - Laying Flat Cable Wires, Cross-Section Of Cores From 7.5 Mm2 - Length Approx. 232 M. - Laying Single Cables In Pvc Insulation, Cross-Section Up To 2.5 Mm2 - Approx. 108 M., And Housing 2 Pcs, - Installation Of Wall Fans With A Capacity Of Approx. 2000 M3/H - 2 Pcs, - Installation Of Socket Covers, C) Central Heating Installation - Disassembly Of Existing Pipelines And Installation Of Copper Pipelines With An Outer Diameter Of And A Wall Thickness Of 18/1.0 Mm. - Approx. 17.5 M, Including Connections To Risers (4 Pieces), - Insulation Of Pipelines With A Layer Of Lagging With A Thickness Of Min. 30.0 Mm - Approx. 17.5 M, - Tightness Test, D) Hall Equipment - Disassembly Of The Existing And Installation Of New Basketball Backboards With Dimensions Of 0.9 X 1.20 M, Made Of Acrylic Glass With A Tilting Ring, Foldable And Adjustable Height - Pcs. 2, - Disassembly Of The Existing And Installation Of Basketball Training Boards With Dimensions Of 1.05X1.80 M Made Of Acrylic Glass Without Height Adjustment - Pcs. .12, - Installation Of A Dividing Curtain With Dimensions Of 14 X 7 Meters With A Wirelessly Controlled Electric Drive, Lifted On A Roller, Non-Transparent Material Up To A Height Of 4 Meters, Above It A Polypropylene Mesh With 10X10 Cm Mesh - Approx. 107.8 M2, - Installation Of A Window Cover With Polypropylene Mesh - Approx. 111.42 M2, - Disassembly Of The Old Board And Installation Of A Sports Scoreboard With Minimum Dimensions Of 1300X1000x10 Cm Wirelessly Controlled With The Elements Clock, Time, Result, Set/Half/, Players Misconduct, Siren With Additional Equipment Two Clocks, Control Panel And Two Manipulators - 1 Set, E) Radio Center - Cutting Grooves, Sealing Grooves, Smooth Vinidur Pipes, Diameter Approx. 20 Mm - Length Approx. 6 M And 157 M, - Assembly Of Pgy P 2X2.5 Mm Cables - 120 M. And 164.5 M., - Assembly Of A 750 Mj Coaxial Cable - Approx. 48 M., - Assembly Of A Synthetic Microphone Cable - Approx. 49 M., - Preparation Of The Ground, Assembly Of A 18Hu Rack Cabinet, Including Control And Microphone Station - Complete, - Preparation Of The Ground, Selection And Installation Of Wall Speakers - 6 Pcs, - Delivery Audio Mixer, Cd/Mp3/Usb/Fm/Bluetooth Player, Sound Engineers Headphones, Graphic Equalizer, Speaker Cables, Amplifier - Each Element As A Set, - Delivery Of Wired Microphones On A Floor Stand With An Extension Arm - 2 Sets, - Delivery And Installation Of An Audio Wall Panel, - Testing Of Installed Cables, - Measurement Of The Resistance Of Single-Phase Electrical Installations, - Final Testing Of Cables With Direct Current, - Selection Of Sound Equipment Along With Conducting Acoustic Tests And Tests. The Detailed Scope Of The Above-Mentioned Works Is Described In The Technical Design, Technical Specification For The Execution And Acceptance Of Construction Works And, As An Alternative, In The Bill Of Quantities.