Tenders Are Invited For Execution Of Fencing And Barrier Netting

2. The Subject Of The Contract Are Construction Works In The Following Scope: 1. Execution Of The Base With Foundations For The Fence And Ball Catchers.2. Execution Of A Fence With Barrier Barriers Along With An Entrance Gate And A Wicket (In Accordance With The Bill Of Quantities And The Detailed Technical Specification For The Execution And Acceptance Of Construction Works) Fence E1 With Gate E4:  Fence 4 M High Made Of Welded Mesh (Panel, System Fencing), Steel, Galvanized, Coated Pvc, Made Of Wire Th. Min. 5Mm, Mesh Size Max. 5X20mm, Double Ribbed Per Meter Of Height, Fastened With System Grips (Coated) To Posts Made Of Galvanized Steel Pipes, Painted With Anti-Corrosion Paint, Min. Dia 60Mm, Spacing Approx. 2.5 M, Concreted In A Foundation With Dimensions Of 30X100 Cm Made Of B17.5 Concrete. The Fence Is Designed With A Galvanized, Powder Coated E4 Entrance Gate, Filled With A Fencing Mesh, Equipped With Handles With Locks. Underpinning Should Be Made In The Form Of Lawn Edging 8X30x100cm, Below The Level Of The Sports Surface. The Construction Of The Fence Should Be Made In Accordance With The Drawings And Specifications. Fence With E2 Ball Stores With E5 Wicket: A Set With A Total Height Of 6 M - A Fence With A Height Of 4 M Made Of Welded Mesh (Panel Fence, System), Steel, Galvanized, Pvc Coated, Made Of Wire Th. Min 5Mm With Mesh Size Max. 5X20mm - Like The E1 Fence And A 2 M High Ball Net Made Of Knotless Polypropylene Mesh With A String Diameter Of Min 4 Mm And A Maximum Mesh Size Of 5X5 Cm (Like E3 Ball Nets). Fence, Equipped With Handles With Locks. The Foundation Should Be Made In The Form Of Lawn Edges 8X30x100 Cm, Below The Level Of The Sports Surface. The Construction Of The Fence Should Be Made In Accordance With The Drawings And Specifications. Mesh Size Max. 5X5 Cm Up To A Height Of 2 M And Max. 12X12 Cm Above 2 M, On Posts Made Of Steel, Galvanized Or Aluminum Pipes, Min. Ø 80 Mm, Powder-Coated With Anti-Corrosion Paint, Spaced Approx. (Equipment, Materials, Raw Materials) Used In The Documentation Are Given As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard. The Ordering Party Allows The Use Of Equivalent Products Provided That They Meet The Equivalence Parameters. Proof Of Equivalence Lies With The Contractor. The Ordering Party Informs That The Submission Of The Offer Must Be Preceded By An On-Site Inspection.