Tenders Are Invited For Modernization Of The Building Of The School And Kindergarten Complex In Galewice - Lighting, Photovoltaics

The Subject Of The Contract Is: A) Delivery, Assembly And Start-Up Of Electrical And Teletechnical Installations:  Disassembly Of The Existing Fluorescent Lighting Fixtures In The Amount Of 296 Pcs. In 44 School Rooms For Various Purposes, Initial Assumptions Are The Assembly Of Approx. 215 Pcs. (Class), 56 Pcs. (Other Rooms) And 2 Pcs. (Outdoor Luminaires), Allowing You To Adjust The Level Of Light Intensity To The Conditions In The Environment. In The Absence Of Movement In The Area Of ​​The Luminaire, Smooth, Two-Stage Reduction Of The Stream,  Power Supply Of Devices With Cables,  Assembly Of Emergency Lighting Luminaires - Approx. 20 Pcs.,  Hacking And Dressing Of Grooves, Priming The Substrate And Painting The Mortared Surface,  Disposal Of Dismantled Luminaires And Fluorescent Lamps,  Preparation Of As-Built Documentation For Lighting And Measurement Of Illuminance In Rooms, Luminaires Should Have A Ce Declaration And Enec Certificate And Meet The Requirements Of The Applicable Pn-En Standard. The Competent Power Plant, Notifications Of Connection To The Power Grid Of The Installation Without Comments, And Warranty And Service Support:  Preparation Of Complete Design Documentation Of The Photovoltaic Installation And Obtaining All Opinions, Arrangements, Permits, Expertises, Administrative Decisions, Analyses, Studies And Materials Necessary To Perform The Task,  Assembly Construction For Pv Panels,  Installation Of Pv Panels On A Structure Specially Designed For This Purpose Requiring As Little Interference With The Roofing As Possible. Any Punctures In The Top Layer Of The Roof Must Be Effectively Repaired And Protected Against Water,  Laying Of Cable Routes And Cables From Pv Panels To The Electrical Switchgear,  Modernization Of The Electrical Switchgear,  Assembly Of Pv Switchgear - Ac And Dc Switchgear,  Assembly Of The Automation System,  Execution Installation Tests And Checking The Correct Operation Of The Apparatus,  Start-Up Of The System And Adjustments As Well As Start-Up Of The Entire Installation With The Performance Of The Required Electrical Measurements,  Preparation Of As-Built Documentation For The Installation In Question, Including Appropriate Certificates And Attestations Regarding The Solutions Used And Installed Devices,  Making The Necessary Mounting Holes In Order To Introducing Devices,  Bricking Up The Assembly Openings After Inserting The Devices,  Making Culverts In Places Where Cable Routes Go Through Walls, Roofs Or Other Obstacles,  Sealing Culverts,  Sealing The Roof Structure (Connecting Roof Panels Before Laying The Pv Installation),  Carrying Out An Expert Opinion On The Roof Load Capacity With Opinions Confirming The Possibility Of Installing Photovoltaic Panels On The Indicated Roof In Stwior.  Reporting The Installation In Question To Ze And Psp. Performing The Procedure Of Connecting The Installation To The Distribution Network And Leading To The Installation Of A Bipolar Meter By The Electricity Distributor,  Installation Of A Monitoring Device That Collects All Data From The Inverter On The System Side, Informing About The Status Of The Installation At A Given Moment, Which Means That It Should Include A Data Logger, Offering Archiving And Data Processing Options. Provide Free Full - Remote And Local Access For The User And Have The Ability To Notify Via Sms And E-Mail About The Occurrence Of A Failure. The Device Should Have A Communication Module That Can Work With Devices From Many Inverter Manufacturers. It Should Enable Logging In To The Network As An Administrator Or A Guest In Order To View The Current Operating Parameters Of The Installation,  Training In Operation. The Offer Should Include A Complete Set Of Supplies, Construction Works And Services Necessary To Carry Out The Project, Including The Effective Completion Of Formalities Related To Commissioning And Transfer To The Employer. The Contractor Shall Also Include In His Scope Those Additional Works And Elements That Have Not Been Specified, But Are Important Or Necessary For The Proper Functioning And Required Maintenance Works, As Well As For Obtaining The Guarantee. Details Are Included In The Swz.