Tenders Are Invited For Construction Of A Street Lighting Line In Niżatyka [St. Niżatyce 2 And Niżatyce 3] - Installation Of Lighting Lanterns - As Part Of The Task Investment Mon: Bud. And Expansion Light Street In Mig Kańczuga

The Subject Of The Contract Is The Performance Of Construction Works Consisting In The Construction Of A Street Lighting Cable Line As Part Of The Investment Task Entitled: Construction And Extension Of Street Lighting In The City And Commune Of Kańczuga. - Assembly Of Steel Lighting Columns Up To 10 M High, - Assembly Of Led Lighting Fixtures With The Use Of Single-Arm Extension Arms With A Length Of 1 M And The Angle Of Inclination Of The Fixture 10°, - Assembly Of Insulated Connectors Of The Type Izk-4-03 (Zero), Izk-4-01 (Fuse) With A Fuse-Link D01 Gl 6A, - Assembly Inside The Pole Of The Ydyż 3X2.5Mm2 Cable Supplying The Lighting Fixture, - Performing The Necessary Tests And Measurements For The Entire Scope Of The Subject Of The Contract. Street Lighting Poles Should Be Installed On Previously Built Prefabricated F150/200 Foundations. Led Luminaires Should Be Mounted Using Single-Arm Extension Arms 1 M Long And The Angle Of Inclination Of The Luminaire Is 10°. The Luminaires Should Be Powered With A Ydyż 3X2.5Mm2 Cable Laid Inside The Pole From An Insulated Izk-4-03-Zero, Izk-4-01-Fuse Connector, Protected With A D01 Gl 6A Fuse Link. It Is Also Necessary To Make A Connection With A 1Xdy 10Mm2 Jumper Between The Izk-4-03 Type Neutral Connector And The Pe Terminal Of The Pole. After Completing All Assembly Works, Control Measurements Should Be Made: Earthing Resistance, Insulation Resistance, Short-Circuit Loop Impedance. Attachments To Swz. Works Should Be Performed In The Amount Specified In The Bill Of Quantities [Niżatyce 2, Niżatyce 3] In The Manner Specified In The Design Documentation, Technical Specification For The Execution And Acceptance Of Construction Works, Description Of The Subject Of The Contract. Quality Guarantee Period: Minimum 60 Months