Tenders Are Invited For Construction Of Street Lighting Ul. Przecławska In Cerekwica And Radosna I Wesoła In Kiekrz - Stage 1 As Part Of The Task Lighting Construction

A) Construction Of Lighting On Ul. Przecławska In Cerekwica: 1) Implementation Of Lighting Along Ul. Przecławska In Cerekwica In Accordance With The Construction And Executive Design Along With The Technical Specification For The Execution And Acceptance Of Works, 2) Modernization Of The Existing Lighting Cabinet, Including The Installation Of A Time Switch, 3) Marking Out The Route Of The Lighting Cable And Location Of Poles, 4) Making A Cable Trench And Laying The Cable 0 .4 Kv Type Yaky 4X25 Mm²,5) Earthing Of The Lantern,6) Installation Of Foundations For Lighting Poles, Installation Of Poles And Led Lighting Fixtures• Poles: Aluminum, Round, Type Sal - 60 In Inox Color (Brushed Aluminum) With A Height Of 6 M With Foundation - 11 Pcs. • Luminaires For Mounting On Poles: Led Luminaires With Min. Luminous Flux Of 2450 Lm With A Power Of 20W, Color Temperature Of Leds 4000K, Ip66, Note Change: Under This Order, Lighting Will Be Built In A Reduced Range. The Scope Of The Task Includes The Construction Of 11 Poles Marked: S1, S4, S6, S8, S10, S12, S14, S16, S18, S20, S22. For The Valuation, Poles With A Height Of 6 M Should Be Assumed. In The Place Of The Designed Pole With The Designation S13, Cable Reserve In The Form Of A Loop With A Length Of 4 M Should Be Left. Additionally, As Part Of The Task In Question, Two Luminaires On The Existing Poles Should Be Replaced From Sodium Luminaires To Led Luminaires. Luminaires With Min. Luminous Flux 3500 Lm. The Type Of Luminaires Used Should Be The Same As The Luminaires Used On The Further Section Being The Subject Of The Contract. The Existing Two Lighting Poles Located At Ul. Przecławska Are Presented On The Situational Sketch. B) Construction Of Lighting In Ul. Radosna I Wesoła In Kiekrz: 1) Lighting Along Ul. Radosna And Wesoła In Kiekrz In Accordance With The Technical Design Along With The Technical Specification For The Execution And Acceptance Of Works, 2) Construction Of A Lighting Cabinet, Including The Installation Of A Timer, 3) Marking Out The Route Of The Lighting Cable And Location Of Poles, 4) Making A Cable Trench And Laying Cable 0, 4 Kv Type Yaky 4X25 Mm²,5) Earthing Of The Lantern,6) Installation Of Foundations For Lighting Poles, Installation Of Poles And Led Lighting Fixtures• Poles: Aluminum, Round, Sal - 60 Type, Inox Color (Brushed Aluminum), 6 M High With Foundation - 8 Pcs. • Luminaires For Mounting On Poles: Led Luminaires With Min. Luminous Flux Of 2450 Lm With A Power Of 16.6 W, Color Temperature Of Leds 4000K, Ip66, Note Change: Under This Order, Lighting Will Be Built In A Reduced Range. The Scope Of The Task Includes The Construction Of 8 Poles Marked: I/2, I/3, I/2/1, I/4, I/5, I/7, I/9, I/11. Poles With A Height Of 6 M Should Be Assumed For The Valuation. 7) Protection Of Poles And Switchgear, 8) Before Commencing Works, Notifications Required By Entities Possessing Utilities Networks In The Area Should Be Made, In Accordance With The Protocol Of The Coordination Meeting, 9) Before Commencing Works, Notifications Should Be Made To The Commune Office For Admission To Work On Electrical Devices Belonging To The Rokietnica Commune,10) Report Disappearing Works To The Supervision Inspector And To The Commune Office Three Days Before The Planned Acceptance,11) Before Commencing Work, Material Cards Should Be Presented For Approval By The Supervision Inspector And The Investor 12) Due To The Lighting Control Clocks Used In The Commune, Control Should Be Carried Out Using, For Example, A Two-Channel Pcz 526 Clock With A Night Break, 13) Insert 1333 Should Be Used In The Lighting Cabinet, 14) Works Should Be Supervised By The Works Manager, The Manager Must Have Unlimited Qualifications In The Relevant Scope,15) After Completing The Works Related To The Construction Of Lighting, The Following Tests Should Be Carried Out: A) Tests Of The Lv Cable Line,B) Tests And Measurements Of The Earthing System (First Measurement),C) Tests And Measurements Of The Earthing System (Each Next Measurement),D) Tests And Measurements Of The Effectiveness Of Zeroing (First Measurement And Each Subsequent Measurement),16) Geodetic Service, Equipment Inventory,17) Preparation Of As-Built Documentation Along With Attestations, Certificates And Its Delivery To The Employer,18) The Contractor Will Be Obliged To Familiarize With The Content And Application Of The Guidelines Of The Order No. Ro.0050.29.2023 Of The Head Of The Rokietnica Commune Of February 13, 2023 On The Protection Of Trees And The Development Of Green Areas In The Rokietnica Commune.