Delivery Of 1 Piece Of Pneumatic 5-Section Seeder In Accordance With The Following Requirements: 1. Pneumatic Point Seeder For Sowing Seeds Of Vegetables And Other Crops (Small Seeds, E.G. Carrots, Parsley, And Large Seeds, E.G. Corn, Peas, Beets) With The Possibility Of Adapting To Sowing Seeds Of Forest Trees; Small (E.G. Pine) And Large (E.G. Beech, Linden, Fir); Seed Size From 1 Mm To Min. 10Mm,2. Number Of Sowing Sections: 5 - With Adjustable Spacing And Quantity, With The Possibility Of Dismantling And Shutting Down Any Sections (E.G. Only Up To 2 Active Sections),3. Width Of The Working Part Of The Seeder 1700 Mm, Resulting From The Distribution Of Sowing Sections,4. Each Sowing Section With A 1-Row And 2-Row Replaceable Coulter.5. Vacuum Sowing System.6. A Rigid Frame With A Width Of Up To 2000 Mm, Adapted To Suspend The Seeder On A 2-Point Three-Point Linkage On A Farm Tractor,7. Grain Tank Capacity (On Each Section); Removable Tanks Or Tanks With Extensions For Seeds Of Different Sizes; For Small Seeds, A Tank Of 1.5 To 2 Dm3, And For Large Seeds - 12 To 15 Dm3 Or 25 To 40 Dm3.8. Spacing Between Rows Adjustable, Minimum Spacing (For 1-Row Coulters) Not Greater Than 23 Cm.9. The Possibility Of Using Agitator Elements In The Seed Chamber Or Mixing Systems,10. Replaceable Seed Feeding Elements (Discs); 1-And/Or 2-Row Discs,11. Seeder With Seeding Adjustment System; Sowing Rate Per Hectare Independent Of Travel Speed,12. Distance Of Sown Seeds In A Row Adjustable: Min. 10 Gear Ratios Or Stepless Adjustment; Seed Spacing From 15 Mm To 100 Mm,13. Rear Solid Kneading Wheel 120 Mm Wide And 240 - 300 Mm In Diameter, Front Tire Wheel 100 - 120 Mm Wide And 240 - 300 Mm In Diameter.14. Mechanical Adjustment Of The Working Depth With An Indicator; Sowing Depth From 0.5 Cm,15. Seeder Equipped With A Suction System To Empty The Tanks Of The Remaining Seeds,16. The Possibility Of Controlling The Operation Of The Inside Of The Sowing Apparatus Through The Window(S),17. Vacuum System Equipped With Flow Regulation And Indicator/Gauge (Vacuometer),18. The Seed Drill Should Have A System Installed (E.G., Overpressure - Compressor) To Facilitate Cleaning And Maintenance,19. Drive Of The Seeders Units From The Tractors Pto Shaft Or From The Copying Wheel (Seeding Sections),20. Seed Drill In The Basic Version, Mounted On A Farm Tractor With An Engine Power Of Up To 60 Kw,
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
