Tenders Are Invited For Painting The Interior Of The Building In The Zus Inspectorate In Września.

1. The Subject Of The Contract Is Renovation Works Related To The Execution Of Painting Works Inside The Building Along With The Replacement Of Door Leaves And The Forging Of Two Door Openings At The Social Insurance Institution Inspectorate In Września, Ul. Wrocławska 42. 2. General Description Of The Works. The Works Include: 1) Preparatory, Demolition And Disassembly Works: - Protection Of Floors With Foil - Carpets, Pvc Floor Coverings, Gres Tiles, Etc., - Protection Of Windows And Window Sills With Foil, - Foil Protection Of Furniture Or Displaying Furniture In The Room Under Renovation And Re-Inserting It Into The Neighboring Rooms, - Securing Cabinets In The Server Room, - Securing The Shelves Of File Storages With A Foil Cover - 10 Rooms, - Removing, Forging Holes In Brick Walls For Door Openings - For 2 Door Openings And 1 Lintel, - Disassembly Of Door Leaves, - Dismantling The Wall Covering From Tiles - At The Washbasin (Room 17), - Moving And Removing Construction Debris And Removing Debris, Doors From Disassembly And Other Materials From Demolished Brick Structures, Including Disposal, - Wrapping Painting Tape Of Door Woodwork And Lamps, 2) Construction Works In The Field Of Walls: - Liquidation Of Internal Window Sills And A Serving Window (1.5 X 1.5 M) In The Room 1 With Disposal, - Openings In Masonry Walls - Arrangement Of Prefabricated Lintels, Plaster Coatings Made On Walls By Hand, Single-Layer Gypsum, Partition Walls Made Of Plasterboards On Single Metal Grids With Double-Sided Coating, Two-Layer Internal Gypsum Finishing Coats On Walls Made Of Boards Plaster, - Scraping And Washing Off The Old Paint In Rooms With A Floor Area Of ​​Over 5 M2, - Gluing One Layer Of Mesh On The Walls, - Eliminating Unevenness On The Walls And Plaster Cracks - 650 M2 Was Assumed, Internal Gypsum Finishing Coats, Two-Layer On The Walls - 650 M2 Were Assumed, - Priming The Substrate With Primers, - Twice Painting With Latex Paints, 3) Construction Works In The Field Of Paneling (Staircase, Corridor): - Removal Of Old Oil Paint - Leaching Paint From Wall Plaster, - Manual Sanding Of The Paneling Base (Tarnishing Of The Paneling), - Priming The Substrates With Primers, - Internal Two-Layer Gypsum Finishing Coats On Walls Made Of Prefabricated And Poured Concrete Elements, - Double Varnishing Of Walls - Paneling With The Use Of Colorless Water Varnish - Staircase And Corridors,4) Construction Works In The Field Of Ceilings: - Internal Two-Layer Gypsum Finishing Coats - 95 M2 Was Assumed, - Priming The Substrates With Primers, - Two Coats Of Old Interior Ceiling Plasters With Emulsion Paints, - Replacement Of 60X60cm Mineral Fiber Boards In Suspended Ceilings With A Metal Structure (10% Of The Boards Were Accepted), 5) Construction Works In The Field Of Door Joinery: - Leaching Of Oil Paint - Door Frames, - Double Oil Painting Of Previously Painted Steel Door Frames For Interior Doors, Sealing Of Door Frames With Walls, - Assembly Of New Door Leaves: • Factory-Made Full Plate Internal Leaves, Finished, • Repositioning Of Handles With Escutcheons, Locks Ordinary Recessed Inserts, Inserts, • Installation Of Hammered Door Hinges, • Reduction - Adjustment To The Existing Openings - Door Leaves From The Upper Or Lower Side, - Other Works: • Installation Of Pvc Wall Fenders, Min. 20 Cm With Priming The Surface Before Assembly, Color Of The Fenders Ral 9006, • Gluing Protective Corners On The Corners Of The Walls (1.5 M Long), • Filling The Gaps With Acrylic Mass - Connecting The Window With The Jamb, • Dismantling The Ventilation Grilles With Disposal, • Filling The Grilles In The Walls, Together With Dressing The Place Of Installation, • Removing The Old Oil Paint - Washing Or Scraping The Paint From The Central Heating Pipes, • Preparation For Painting, • Painting The Central Heating Pipes Twice With Oil Paint, • Preparation For Painting Simple Railings And Grates With Oil Paint - Removing Dirt Mortar And Rust, • Double Oil Painting Of Gratings And Balustrades Made Of Straight Bars, • Disassembly And Reassembly Of Numbering Plates, Boards, • Removal Of Instructions, Stickers, Etc., • Local Completion Of Grouting On Pedestals - Corridor, • Assembly And Disassembly Of Flush-Mounted Plug Sockets, • Assembly And Disassembly Of A Switch Or A 1-Pole Pushbutton. Flush-Mounted In A Box.3. A Detailed Description Of The Subject Of The Contract Is Attached As Appendix 10 To The Swz (Opz, Bill Of Quantities, Technical Specification For The Execution And Acceptance Of Construction Works).