Tenders Are Invited For 23 22 2Cl 020 Single Underfloor Wheelset Lathe For The Düsseldorf Plant, Db Regio Ag

23 22 2Cl 020 Single Underfloor Wheelset Lathe For The Düsseldorf Plant, Db Regio Ag. A Cnc-Controlled Single Underfloor Wheelset Lathe Is To Be Procured For Db Regio Ag At The Düsseldorf Location (New Procurement/ New Construction). The Present Publication Refers To The Manufacture, Delivery, Assembly, Commissioning, Training, Trial Operation And Final Acceptance Of The Machine Including All Necessary Peripherals For The Düsseldorf Plant (Machine Is Set Up In Parallel With An Existing Machine). Wheel Sets Of Db Regio Ag With A Standard Gauge Of 1,435 Mm Are Mainly To Be Measured And Machined On The Machine (Mainly Regiolok And Et/Vt Series). The Single Underfloor Wheel Lathe Must Be Suitable For The Following Tasks/Functions: ► Automatic Measurement Of The Wheel Sets In At Least The Usual Wheel Set Dimensions A1, A2, D, ∆D, E, H, Qr, G And H ► Measurement/Processing Of The Wheel Sets When Installed Or As A Single Wheel Set With Bearings/Bearing Housings O Wheel Sets Can Be Stored On The Inside Or Outside And In Some Cases Can Be Mechanically Coupled To One Another ► Automatic Reprofiling Of The Wheel Rims/Wheel Tread On Monoblock And Wheel Discs With Tires With Profiles According To Din En 13715 Or Ril 984.0400 In Various Diameters And Widths As Well As: O Machining Of Wheel And Shaft Brake Discs (Tarpaulins) O Machining Of The Outer Wheel Rim Face And Re-Grooving Of The Identification Groove ► Proof Of The Compliant Condition Of The Wheelsets After Processing With Regard To The Parameters D1.2, ∆D1.2,E1.2, H1.2, Qr1.2, H1.2, G1.2, A1 And A2 With A Measuring System According To Din 272019 ► Logging Of All Measured And Calculated Data In An Electronic Database (Machine-Internal Or Db-Hosted) Plus The Possibility Of Automated Transmission To The Internal Erp System (Sap Isi) ► Possibility Of Remote Maintenance Access Via Secure Remote Maintenance ► Output Of Defined Machine Information Via Opcua Interface ► Registration/Deregistration Of The Operator Via Db Group Id Card And Assignment Of Corresponding Authorizations ► Transfer Of The Chips To The Chip Conveyor System Of The Neighboring Existing Machine ► Connection Of An Adapter Magazine For Clamping Tools To The System Of The Neighboring Existing Machine The Underfloor Wheelset Lathe Is To Be Designed With An Automatic Chip Disposal Device With Chip Crusher, A Fume And Dust Extraction System, A Hydraulic System And Other Functionally Necessary Peripherals According To Ce Conformity To The Latest State Of The Art. The Primary Measuring Circle Diameter Range To Be Processed Is Between 580 Mm And 1250 Mm. The Wheelset Shaft Length Including The Bearing/Bearing Housing Is A Maximum Of 2,600 Mm, The Axle Load Acting On The Machine Is A Maximum Of 250 Kn (Plus Any Hold-Down Forces That May Need To Be Applied).