Tenders Are Invited For Construction Of A New And Modernization Of The Existing Socio-Cultural Infrastructure

The Subject Of The Contract Is The Construction Of A New And Modernization Of The Existing Social And Cultural Infrastructure In The Koĺ„Skowola Commune. The Investment Includes The Following Tasks: Modernization And Adaptation To The Social Function Of A Post-School Building In Skorzeszyn And Construction Of A Service Building - A Village Hall In Pulki. Modernization And Adaptation To The Social Function Of The Post-School Building In The Village Of Skorzeszyn Includes Construction Works In The Construction And Construction, Electrical And Sanitary Industries. The Subject Of The Construction Project Is The Extension And Reconstruction Of The Primary School In Skowieszyn With Social Apartments, With The Change Of Use Of Part Of The School Building Into An Environmental Self-Help House. Building. In One Extension There Is An Elevator Shaft With The Main Entrance To The Building, The Other Extension Is A New Staircase. Elevator Shaft With Reinforced Concrete Walls, Other Brick Walls Locally Stiffened With Reinforced Concrete Pins. Ceilings In The Form Of Reinforced Concrete Slabs. The Elevator Shaft Was Placed On A Reinforced Concrete Slab, The Masonry Walls Were Placed On Reinforced Concrete Footings. Roof Structure In The Form Of A Reinforced Concrete Flat Roof. As Part Of The Electrical Works, The Following Are Planned: • Execution Of The Internal Electrical Installation Of The Designed Building In The Scope Of: • Power Supply And Measurement Of Electricity, • Rg Electrical Switchgear, • Fire Protection Switch, • Basic Internal Lighting Electrical Installation• Electrical Installation Of Emergency Lighting For Escape Routes, • Illuminated Safety Signs, • Electrical Installation Of 230 V Ac Plug Sockets, • Installation Of 400 V Ac Three-Phase Sockets, • Installation Of Power Supply For Ventilation And Heating Devices, • Installation Of An Alarm And Paging System In A Toilet For The Disabled, • Teletechnical Installation • Overvoltage Protection • Electric Shock Protection And Equipotential Bonding. Construction Of A Service Building - A Village Clubhouse In Pulki Includes Construction Works In The Construction And Construction, Electrical And Sanitary Industries. The Service Building Of The Clubhouse Will Be Located In Pulki On A Plot With Registration Number 81/3. Rectangular With A Symmetrical Gable Roof. A Roofed Terrace Has Been Designed At One Of The Gable Walls. The Building Was Designed In Traditional Brick Technology. Direct Reinforced Concrete Foundations. Basement Walls Made Of Concrete Blocks. Walls Above The Ground Made Of Aerated Concrete Blocks, 24 Cm Thick. Monolithic Reinforced Concrete Studs And Columns. Monolithic And Prefabricated Reinforced Concrete Lintels. Roofs With A Wooden Gable Structure. Basic Technical Data Of The Building: Usable Area 208.4 M2 Building Area 251.26 M2 Gross Volume Of The Building 1448.5 M3 Building Height 7.07 M Number Of Overground Storeys 1 Foundation Level Of The Ground Floor 151.50 M Above Sea Level As Part Of Construction Works, Reinforced Concrete Foundations Should Be Made Made Of C16/20 Concrete In The Form Of Footings And Foundation Footings On A Base Of C8/10 Concrete, Gr. 10 Cm. Foundations Reinforced With Rods Of 6Mm, 10Mm And 12Mm Diameter. Wooden Posts Fixed To The Foundations With A4 Steel Anchors. Horizontal Insulation Of Foundations With Two Layers Of Roofing Felt And Vertical Insulation With Asphalt Coatings. Foundation Walls Made Of Concrete Blocks, Thickness 25 Cm, Thermally Insulated With Extruded Polystyrene, Th. 15Cm. Insulation Made Of Dispersion Coatings. Styrofoam Finish With Plaster And Insulate. In The Plinth Part Above The Ground, Perform Pebble Plaster. Walls Above The Ground Are Made Of Gas Concrete, Thickness. 24Cm Load-Bearing And 12Cm Partition Walls. The Walls Are Finished With Cement-Lime Plaster From The Inside And Painted Twice With Emulsion Paints. In The Bathrooms, The Walls Are Tiled To The Full Height, And In The Social And Technical Rooms, Next To The Sinks And Kitchen Cabinets, The Walls Are Tiled. In The Walls, Make Crown Pins, Lintels And Reinforced Concrete Beams Made Of C20/25 Concrete. Reinforced Concrete Elements Reinforced With Steel With A Diameter Of 6Mm And 12Mm. Over Some Of The Openings, Prefabricated Ytong Lintels. Anchors For Fixing Wall Battens And Wooden Beams Made Of Galvanized Steel. Wooden Roof Structure In The Form Of Wooden Trusses Made Of Seasoned And Impregnated Class C24 Wood. Make Patches All Over The Roof. The Roof Will Be Covered With Metal Tiles With An Anti-Condensation Coating. All Necessary Flashings Should Be Made On The Roof: Ridge Tiles, Eaves Sheets. Roof Insulated With Vapor And Wind Insulation. Roof Insulation Made Of Mineral Wool 25 Cm Thick. The Roof Is Boarded From Below And Finished With A Suspended Ceiling. Gutters And Downpipes Made Of Coated Steel Sheet. Roof Eaves Finished With Boarding From Below. Install Snow Barriers On The Roof. The Floor Of The Building Is Made Of 30 Cm Thick Sand And C12/15 Concrete 10Cm. Anti-Moisture Insulation Made Of Pvc Foil Th. 0.3Mm. Thermal Insulation Made Of Polystyrene For Floors Gr. 15Cm. Cement Board 7 Cm Thick, Smooth Troweled And Reinforced With Rabitz Mesh. The Floor Is Finished With Stoneware With Plinths. Window Joinery In Part Made Of Pvc And Aluminum With An Insulation Value Not Exceeding 1.1 W/M2xk. The Internal Window Sills Are Made Of Conglomerate And The External Ones Are Made Of Coated Sheet. External Doors Made Of Pvc And Aluminum With Thermal Insulation Not Higher Than 1.5 W/M2xk. Internal Board, Wooden And Aluminum Doors. Elevation Insulated With Styrofoam Th. 20Cm And Partly Wool 20Cm. Finishing The Facade With Thin-Layer Plaster, Natural Stone, Gr. 12 Cm And Boards On A Wooden Grid. Around The Building, Paved Surfaces Should Be Made Of 6 Cm Thick Cobblestones And Concrete Slabs At The Entrance To The Building And On The Terrace. Block Surfaces With Concrete Edging. A Water Supply Connection To The Existing Water Supply Network Should Be Made To The Building, A Sanitary Sewage System Connection To A Sealed Tank, And An Underground Wlz Internal Installation. The Buildings Sewage Systems, The Buildings Internal Central Heating System, A Built-In Boiler Room With A Heat Pump, A Ventilation System With A Heat Recovery Unit. A Detailed Description Of The Subject Of The Contract Is Included In The Technical Designs (Architecture, Structure, Electrical Installations, Sanitary Installations), Bills Of Quantities, Stwiorb For The Skowieszyna Building And Designs (Architecture, Electrics, Plumbing, Water Supply Connection), Detailed Technical Specification For The Execution And Acceptance Of Works, Geotechnical Opinion, Bills Of Quantities Constituting Annex No. 1 To The Swz. The Detailed Scope Of The Parties Obligations Is Also Included In The Contract Template Constituting Appendix 3 To The Tor.