Tenders Are Invited For Temperature Measurement And Calibration Set

Temperature Measurement And Calibration Set. The Subject Of The Contract Is The Delivery Of A Set Of Three Independent Separate Portable Temperature Calibrators (Calibration Ovens) For Maintaining A Constant Temperature In A Defined Space Intended For Calibration, Testing And Verification Of Temperature Sensors And For Ensuring A Stable Temperature For Verifying The Properties Of Other Types Of Sensors. For Very Accurate Temperature Measurement In The Calibrators, The Set Will Be Supplemented With A Multifunctional Electronic Thermometer With Five Reference Platinum Resistance Temperature Sensors - Four Secondary Standards Ii. Order And One Primary Standard. The Assembly Will Consist Of The Following Devices: A. Portable Temperature Calibration Furnace (Calibrator No. 1) With A Large Volume Of The Well For Low Temperatures In The Range From -25 °C To +140 °C. B. Portable Temperature Calibration Furnace (Calibrator No. 2) With A Large Sump Volume For High Temperatures In The Range From +50 °C To +650 °C. C. Accurate Temperature Calibrator With Dry Block For The Range -25 °C To 150 °C. D. Multifunctional Electronic Thermometer With Five Reference Platinum Resistance Sensors (Four Secondary Standards And One Primary Standard). The First Calibration Furnace Must Be Able To Work In A Temperature Range Of Min. -25 °C To +140 °C, Second Calibration Furnace In The Range Of Min. +50 °C To +650 °C And A Third Accurate And Fast Temperature Calibrator In The Range -25 °C To +150 °C. The Calibrators Will Also Include Corresponding Inserts To Reduce The Space Around The Tested Sensors. Required Accessories For Calibrators Are Transport Packaging Or Other Suitable Protective Cases For Their Transport. The Multifunctional Electronic Thermometer Will Enable Measurements In The Maximum Temperature Range Of -200°C To 850°C, Depending On The Sensor Used. The Required Secondary Platinum Resistance Standards (Sensors) Will Be Designed For A Temperature Range Of -50°C To 250°C (2 Types), -100°C To 450°C (1 Type) And -50°C To 670°C (1 Type ). The Primary Standard Will Be Determined For The Temperature Range Of -200 To 670 °C The Subject Of The Public Contract Is Defined In Detail By The Technical, Commercial And Other Contractual Conditions, Which Are Part Of The Tender Documentation Annexes.