Tenders Are Invited For Delivery Of A Medium Firefighting And Rescue Vehicle With A 4X4 Drive For The Volunteer Fire Brigade In Grabie

The Subject Of The Order Is The Delivery Of A Brand New Medium Firefighting And Rescue Vehicle With 4X4 Drive For The Volunteer Fire Brigade In Grabie. Basic Technical And Formal Requirements Of The Vehicle. 1. General Conditions: A Built-Up And Equipped Vehicle Must Meet The Requirements Of: - The Act Of 20 June 1997 Road Traffic Law (Journal Of Laws Of 2022, Items 988, 1002, 1768, 1783, 2589, 2600 , 2642 As Amended), Together With The Implementing Regulations To The Act, - Regulation Of The Minister Of Internal Affairs And Administration Of June 20, 2007 On The List Of Products Used To Ensure Public Safety Or Protect Health And Life And Property, As Well As The Rules For Issuing Approval Of These Products For Use (Journal Of Laws Of 2007, No. 143, Item 1002, As Amended), - Regulation Of The Ministers Of: Interior And Administration, National Defence, Finance And Justice Of March 22, 2019 On Special Vehicles And Vehicles Used For Special Purposes Of The Police, The Internal Security Agency, The Foreign Intelligence Agency, The Military Counterintelligence Service, The Military Intelligence Service, The Central Anti-Corruption Bureau, The Border Guard, The State Protection Service, The National Revenue Administration, The Prison Service And The Fire Brigade (Journal Laws Of 2019, Item 594). The Vehicle Must Have A Valid Cnbop Admission Certificate On The Day Of Submitting The Offer. The Contractor Is Obliged To Submit This Document Together With The Offer. The Vehicle Must Have A Valid Certificate Of Admission For Use In Fire Protection In Poland, At The Latest On The Day Of Technical And Quality Acceptance, Issued On The Basis Of The Regulation Of The Minister Of Interior And Administration Of June 20, 2007 On List Of Products Used To Ensure Public Safety Or To Protect Health And Life And Property, As Well As The Rules For Issuing Admission Of These Products To Use (Journal Of Laws Of 2007, No. 143, Item 1002, As Amended). The Vehicle Must Be Marked With The Operating Numbers Of The State Fire Service In Accordance With The Order No. 3 Of The Commander-In-Chief Of The State Fire Service Of January 29, 2019 On Transport Management In Organizational Units Of The State Fire Service (Journal Of Laws Of The State Fire Service Headquarters Of 2019, Item 5). The Vehicle Chassis Must Have A Valid Type Approval Certificate Or Ec Certificate Of Conformity In Accordance With Separate National Regulations Relating To Road Traffic Law. In The Event That The Installation Conditions Specified By The Chassis Manufacturer Are Exceeded, A Complete Vehicle Type Approval Certificate And The Consent Of The Chassis Manufacturer For The Installation Are Required. Devices And Components Installed In The Vehicle Should Meet The Requirements Of Separate National And/Or International Regulations.2. Chassis Cab: Brand New Vehicle, Engine And Chassis Cab From The Same Manufacturer. Chassis Production Year Consistent With The Vehicles Delivery Year. Required Vehicle Classification: M-2-6-3000-... Chassis Of The Second Category Car, (Off-Road) With 4X4 Drive With Differential Locks On The Front And Rear Axles. Manual Gearbox, Max. 6 Gears Forward. The Maximum Dimensions Of The Vehicle Do Not Exceed: - Length 8000 Mm - Height 3200 Mm. At The Same Time, The Distribution Of This Mass Among The Axles And The Mass On Each Axle Must Not Exceed The Values ​​Specified By The Manufacturer Of The Vehicle Or Base Chassis. The Permissible Difference In The Load On The Left And Right Side Must Not Exceed 3%. The Vehicle Is Equipped With A Signaling And Warning Device, Acoustic And Light Emergency Vehicle Made In Led Technology. The Chassis Of The Vehicle Must Meet At Least The Following Conditions: - Running Gear - 4X4 Drive, With The Differential Lock Of The Rear And Front Driving Axles. - Braking System Equipped With The Abs System To Prevent Skidding Of All Wheels During Braking Or Equivalent. Min. Power 210 Kw Meeting The Applicable Road Traffic Regulations On The Day Of Collection - Min. Euro 6. The Smallest Turning Circle Diameter Does Not Exceed 18 M. The Cars Engine Is Adapted To Be Powered By Biofuels Or Fuels With The Addition Of Biocomponents, Which Should Be Confirmed By An Appropriate Document From The Chassis Manufacturer, Attached To The Offer. Maintenance Necessary When Powering The Engine With Biofuels Or Fuels With Biocomponents. The Vehicle Warranty Cannot Exclude The Use Of The Above-Mentioned Fuel.3. Fire-Fighting Structurethe Structure Is Made Entirely Of Corrosion-Resistant Materials. Welded Skeleton Made Of Aluminum Profiles, Sheathing Made Of Aluminum, Finishing Elements Made Of Plastic. The Floor Of The Lockers Is Finished With A Smooth Acid-Proof Sheet Without A Threshold (Possibility Of Draining Water To The Outside). The Aluminum Mounting System For Shelves In Equipment Compartments Must Enable Smooth Height Adjustment. Other Steels Are Excluded, Regardless Of The Type Of Corrosion Protection. The Superstructure Is Attached To The Main Frame Of The Chassis By Means Of An Intermediate Frame Equipped With Shock-Absorbing Elements. A Masking Fairing Is Installed Between The Body And The Cabin. Lockers For Equipment And Equipment In A 3+3+1 Shutter System, Closed With Water And Dustproof Shutters Supported By A Spring System, Protected Against Self-Closing, Made Of Corrosion-Resistant Materials, Tubular Shutter Closures Or Equivalent, Locks With A Key, One Key Should Be Fit All Locks. Shutters Equipped With Tapes To Facilitate Closing (All Tapes Installed On The Right Side Of The Box). Access To The Equipment While Maintaining The Requirements Of Ergonomics. The Roof Of The Building In The Form Of A Working Platform, In A Non-Slip Design, With Mounted Equipment Holders And Fully Illuminated. At The Rear Of The Vehicle, On The Right Side, There Is An Aluminum Ladder For Access To The Roof, Which Is Foldable And Inclined At An Angle In Relation To The Rear Wall Of The Superstructure, Which Is Intended To Facilitate Safe Access To The Roof Of The Vehicle. Non-Slip Steps. Handle(S) Are Fitted Near The Top Of The Ladder To Facilitate Climbing. On The Roof There Are Handles For Attaching A Ladder. Additionally, 2 Equipment Boxes Are Mounted On The Roof Of The Vehicle, Made Of Corrugated Aluminum Sheet. The Crates Must Have Led Lighting. Handles, Handles Of All Car Devices, Shutter Doors, Drawers, Platforms, Trays Must Be Constructed In Such A Way That They Can Be Operated With Gloves. Operation Of The Fire Truck Control Panel Must Be Possible With Gloves (Solution With Led/Lcd Touch Screen Etc. Is Excluded). Two-Range Fire Engine Pump Made Of Light Alloys, With A Capacity Of Min. 2400 Dm3/Min At A Pressure Of 0.8 Mpa And A Suction Depth Of 1.5 M And For High Pressure Min. 300 Dm3/Min At A Pressure Of 4 Mpa. Additionally, The Engine Pump Compartment Is Heated By An Independent Air Heating Device. The Water-Foam System Is Equipped With A Foaming Agent Dispenser Ensuring Concentrations Of 3% And 6% (Tolerance ± 0.5%) In The Full Range Of Pump Capacity. The Fire Truck Pump Is Equipped With A Control System Enabling Automatic And Manual Adjustment Of The Working Pressure. The Water Tank With A Capacity Of 3 M3 (±3%) Is Made Of Composite Materials. The Tank Must Be Equipped With Instrumentation Enabling Its Safe Operation, With A System Protecting Against The Outflow Of Water While Driving. The Tank Should Be Equipped With Breakwaters And Have An Inspection Hatch. Note. Due To The Technical Limitations Of The Notice Form, The Full Content Of The Technical And Formal Requirements Has Been Formulated In Point 3 Of The Terms Of Reference.