Tenders Are Invited For Revitalization Of Former State-Owned Farms In Dobrzyniówka As Part Of The Polish Government Fund: Program Of Strategic Investments

The Subject Of The Order For Task No. 1 Includes: 1) Execution Of External Works, In Particular: • Disassembly Of Window And Door Joinery; • Reduction Of Window Openings (From The Entrance To The Plot); • Installation Of Window Joinery With A Heat Transfer Coefficient Of U=0.9 W/ M²k With Hygro-Controlled Diffusers, Automatically Controlled With The Function Of Unsealing - Anthracite Color; • Widening Of Door Openings; • Installation Of Aluminum Door Frames With A Heat Transfer Coefficient Of U=1.3 W/M²k, Anthracite Color; • Anti-Moisture Insulation Of Foundation Walls; • Thermal Insulation Foundation Walls With The Use Of 20 Cm Thick Foundation Polystyrene With A Heat Transfer Coefficient Of ƛ = 0.032 W/Mk; • Insulation Of The Overground Walls (Using The Bso Method With The Use Of 20 Cm Thick Polystyrene With A Thermal Conductivity Coefficient Of ƛ = 0.032 W/Mk And 20 Cm Thick Silicone Plaster White;• Thermal Insulation Of Jambs With 2 Cm Thick Polystyrene Boards With A Thermal Conductivity Coefficient Of ƛ=0.032 W/Mk;• Thermal Insulation Of The Roof With Hard Mineral Wool, Thickness. 30 Cm With A Heat Conduction Coefficient Of ƛ=0.036 W/Mk; • Roofing With Heat-Welded Roofing Felt 2 X With Installation Of Ventilation Chimneys, 4 Pcs.; • Installation Of Flashings And Guttering - In Anthracite Color; • Demolition Of A Smoke Chimney And Construction Of A New One In The Same Place Chimney Made Of Ceramic Ventilation Blocks; • Foundation Of The Ventilation Chimney, Installation Of Chimney Caps And Chimney Insulation; • Opening In The Ceiling For The Installation Of Ventilation Pipes Above The Kitchen Hoods, Together With The Installation Of Steel Ventilation Pipes And Installation Of The Roof Ventilator - In Accordance With The Sanitary Design; Over The Entrances To The Building And Assembly Of System Canopies With An Aluminum Structure And Filling With A Cellular Polycarbonate Panel 180X120 Cm; • Repositioning Of Concrete Cubes In Front Of The Entrance In A Way That Allows Disabled People To Enter And Elimination Of Entrance Thresholds; • Assembly Of A Railing On A Ramp For Disabled People Made Of Stainless Steel ; • Demolition Of The Existing Band Of Paving Tiles 35X35x5 Cm And Making A Band On Three Sides Of Paving Tiles 50X50x7 Cm Along With The Assembly Of The Rim 6X20 Cm On Cement-Sand Mortar; • Marking The Boundaries Of The Plots Where The Village Hall In Dobrzyniówka Is Located; • Making A Fence ( Plots On Which The Reconstructed Building Is Located) Made Of Galvanized Steel Panel Profiles In A System Of Vertical Rails, Powder Coated In Anthracite On The Foundation; • Construction Of A Fence Around The Photovoltaic Installation And A Fire Tank. From A Panel Fence Made Of 4 Mm Rods On A Foundation; • Disassembly Of The Existing Surface With Curbs; • Hardening Of The Driveway With Concrete Cobblestones Along With Parking Spaces; • Cleaning The Area After Construction Works; • Development Of The Area In Front Of And Around The Common Room With Lawns; 2) Execution Of Internal Works, In Particular: • Construction Of Partition Walls Made Of Gypsum Boards On Steel Grates; • Leveling Of Existing Floors; 60X20 Cm. • Renovation Of The Existing Walls And Ceilings; • Spackling And Painting Of The Newly Created Partition Walls; • Wall Cladding And Aprons Made Of Ceramic Tiles; • Installation Of Internal Panel Door Woodwork, Cylinder Locks, Mdf Door Frames With Bands, Veneer Reinforced As For Public Utility Doors; • Assembly Of A Pvc Service Window; • Construction Of Furniture In The Social Room; • Delivery And Assembly Of Household Appliances; ;• Execution Of A New Sanitary Installation;• Execution Of A New Central Heating Installation;• Execution Of A New Mechanical Ventilation Installation;• Assembly Of An Air Handling Unit;• Delivery And Assembly Of Equipment;• Execution Of A Sealed Tank For Domestic Sewage With A Capacity Of 9.6• Assembly Of Handrails For The Disabled; 3.2) Electrical Installation Works, Which Include, Among Others: • Disassembly Of The Existing Electrical Installations; • Construction Of Internal Power Supply Lines; • Construction Of New Electrical Switchboards; • Construction Of A New Fire Protection Installation; New Lighting System With Emergency Lighting; • New Installation Of Plug Sockets; • New Installation Of Power Circuits; • New Installation Of Equipotential Bonding; • New Installation Of Surge Protection; • New Installation Of Protection Against Electric Shock; Lightning Protection;• Execution Of A Call System;• Installation Of Air Curtains;• Installation Of Air Conditioners With The Option Of Year-Round Operation In The Heating/Cooling System;• Execution Of A Photovoltaic Installation With A Power Of 13 Kw At The Building Of The Village Hall Along With Lightning Protection;3.3) Works Of Gas Installations, Which Include Among Others: • Execution Of A New Internal Installation; • Installation Of A Condensing Gas Boiler; • Construction Of A New Gas Detection System In The Boiler Room; • Construction Of An External Gas Installation With Assembly And Filling Of The Liquid Propane Gas Tank, Placed On A Prefabricated Concrete Slab 130X200 Cm Thick. 10Cm; • Preparation Of Documentation And Notification Of The Gas Tank To Udt