Tenders Are Invited For Modernization Of The Electrical Installation In The Kunegunda (Dwarf) Chamber On Position Ii In The Wieliczka Salt Mine

The Subject Of The Order Is The Design And Execution Of The Lighting And Animation Installation In The Kunegunda Chamber, Together With The Construction Of A New Switching Station At The Iiw Level In The Underground Part Of The Wieliczka Salt Mine, Hereinafter Referred To As The Installation. Before Starting The Installation, The Contractor Is Obliged To: 1) Prepare The Design Installation, 2) Obtaining A Permit On Behalf Of The Employer To Perform The Works Covered By The Installation Project, Granted By The Conservator Of Monuments Of The Krakow Saltworks (Hereinafter Referred To As Kzkżs). The Installation Includes: 1) Building A New Switching Station In The Kunegunda Chamber, 2) Replacing The Existing Light Sources To Rgbw Led Sources With The Possibility Of Smooth Adjustment In The Light And Sound Arrangement, Cooperating With Px Type Controllers, 3) Modernization Of The Control System, Enabling Control From The Touch Panel. 4) Preparation And Installation Of Software For Multilingual Light And Sound Animations -Sound, Along With Animation. As Part Of The Installation, The Contractor Is Obliged To: 1) Organize The Work Area, 2) Provide The Materials Necessary To Perform The Installation, 3) Provide Machines And Devices Necessary To Perform The Installation, 4) Provide People With Appropriate Permissions And Qualifications To Supervision Over The Conducted Installation Works, 5) Carry Out Installation Works, 6) Perform Acceptance Measurements. The Scope Of The Task Should Include: 1. Execution Of The Design Of The Electrical Installation In The Kunegunda Unit On Pos. Iiw.2. Obtaining A Permit To Perform The Works Covered By The Installation Project, Granted By The Conservator Of Monuments Of The Krakow Saltworks.3. Execution Of Works Together With The Delivery Of Materials.4. Performing Acceptance Measurements.5. Technical Acceptance. The Project Should Provide For: 1. Installation Of A New Switchgear In The Kunegunda Chamber.2. Replacement Of The Existing Light Sources With Led Rgbw Sources With The Possibility Of Smooth Adjustment In The Light-Sound Arrangement Cooperating With Px.3 Type Controllers. Modernization Of The Control System Enabling Control From The Touch Panel.4. Installation Of Software Controlling Multilingual “Light And Sound” Animations.5. The Designed And Constructed Installation Must Meet The Conditions Of The Safety System Installed In The Excavations Of The Tourist Route. The Subject Of The Contract Is The Design And Implementation Of The Electrical And Multimedia Installation In The Kunegunda (Krasnoludków) Chamber On The Second Higher Level In The Wieliczka Salt Mine. Electrical Switchgear Equipped With Security And Control Devices Should Be Built In Place Of The Existing Animation Cabinet. The Switchgear Should Be Made In The Form Of A Box Switchgear That Meets The Conditions Of The Safety System Installed In The Excavations Of The Tourist Route. The Scope Of Works Should Also Include The Replacement Of The Existing Power Cable (Single-Phase To Three-Phase), Used To Power The Newly Installed Switchgear From The Existing Rps Ii Switchgear. The Control Gear Should Be Selected In Such A Way That The Light And Sound Animation Can Be Reproduced In Its Current Form (Greeting, Fairy Tale, Choice Of Languages). The Chamber Should Be Equipped With Loudspeakers To Play Sound In Such Dimensions And Built In Such A Way That They Do Not Attract The Attention Of Visitors. The Chamber Should Be Equipped With Rgbw Led Luminaires Cooperating With Appropriate Controllers. Lighting Should Be Designed So As Not To Change The Arrangement Of The Chamber And Maintain Its Current Character. The Choice Of Light Temperature Should Be Matched With The Material Of The Illuminated Object (Wood - Warm Light, Salt - Cold Light). Luminaires Should Be Small In Order To Be Easily Hidden. It Is Planned To Equip The Chamber With A Total Number Of Light Points Not Exceeding 35 Pieces. A Control Touch Panel Should Be Used In Place Of The Current Multifunctional Switch Used To Select The Appropriate Language And Storytelling. In Addition, It Is Necessary To Consider The Possibility Of Switching On The Lighting (All Or Part Of The Chamber) Permanently (Without Starting The Animation) From The Panel Or (Optionally) Using A Motion Sensor. Detailed Information On The Subject Of The Contract And The Rules For Its Implementation Are Included In The Contract Template Constituting Appendix 8 To The Specification And In Appendix 2 To The Tor.