Tenders Are Invited For Reconstruction Of Municipal Roads In The Area Of Gm. Wloclawek: Ul. Diamentowa In Nowa Wis, Dł. 225M; Agatowa Street In Nowa Wis, Dł. 295M; Communal Road Kosinowo-Adaminowo, Length 998 M (Divided Into Three Tasks).

Part I: Reconstruction Of Communal Roads In The Area Of The Commune Of Włocławek, I.E. Road – Ul. Diamentowa In Nowa Wieś 225Modc. From Km 0+010 Km To 0+235” The Subject Of The Contract In This Lot Is The Reconstruction Of The Municipal Road - Ul. Diamentowa, Length 225M, Width 6.0M, On The Section From Km 0+010 To 0+235, I.E. From The Provincial Road No. 317 Włocławek-Kruszyn To Ul. Agatowa. Reconstruction Consists Of: - Bitumen Road Surface, 6 M Wide, By Milling The Old One, Laying A Wearing Course Of Asphalt Concrete, Thickness 4 Cm And Profile W-He 50 Kg/M 2; - Exits Serving As Parking Bays Of Concrete Cubes On A Concrete Foundation - Sidewalks Made Of Concrete Cubes, Including A Bus Platform With A Canopy 3.0 * 1.5 * 2.7 M - Exit To The Access Road - Renovation Of The Rainwater Collector With A Diameter Of 300Mm, Length 58M With 4 Street Inlets Along With Reconstruction Of The Surface Structure Of Ul. Diamentowa - Renovation Of The Rainwater Collector With A Diameter Of 600Mm, Length 31M With A Concrete Well. Fi 1000Mm Under The Bus Loop With Reconstruction Of The Structure Of The Surface Of The Bus Loop - Linear Speed Bumps, 2 Pieces Of Paving Stones 8Cm - Greenery - Lawns, - Device Adjustment - Vertical Markings A-11A 4 Pcs., D-6 Active Solar-Powered 2 Pcs. And Horizontal - Pedestrian Crossing. The Employer Informs That A Detailed Description Of The Subject Of The Contract For This Part Is Included In The Design Documentation And Technical Specifications For The Execution And Acceptance Of Works, Constituting Appendix No. 1 To The Tor And The Draft Provisions Of The Agreement, Constituting Appendix No. 10 To The Tor. Equivalent Solutions If The Design Documentation And Drawings Indicate The Origin (Brand, Trademark, Manufacturer, Supplier) Of Materials Or Standards, Approvals, Specifications And Systems Referred To In Art. 99 Sec. 5 P.Z.P., The Employer Allows Offering Materials Or Equivalent Solutions, Provided That They Guarantee The Correct Implementation Of The Works And Ensure The Achievement Of Technical Parameters Not Worse Than Those Assumed In The Above-Mentioned Documents, I.E. In Particular: Wherever The Subject Of The Contract Is Described By Indicating Trademarks, Patents Or Origin, Source Or Specific Process Or Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems, The Employer Allows The Contractor To Offer Materials Or Solutions Equivalent To Those Described In The Documentation, Provided That They Do Not Reduce The Specified In The Standards Documentation. They Will Have The Required Attestations, Certificates Or Approvals And Will Ensure The Execution Of The Order In Accordance With The Expectations And Requirements Of The Employer Specified In The Tor. Indicating In The Project Documentation Exemplary Trademarks Of Patents Or Origin, Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems Is Intended To Clarify The Expectations Of The Ordering Party. All Trademarks, Patents Or Certificates Of Origin, Source Or Specific Process, As Well As Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems, Indicated In The Technical Documentation, Should Be Treated As Examples Only, And The Ordering Party Allows The Use Of Equivalent Materials, Devices, I.E. With Functional Parameters Not Worse Than Those Indicated By The Employer. All The Parameters And Technical Requirements Of The Sample Materials And Devices Provided For In The Tender Documentation Are The Minimum Parameters, Unless Otherwise Stated. All Trademarks, Patents Or Certificates Of Origin, Source Or Specific Process As Well As Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems Indicated In The Design Documentation Shall Be Accompanied By The Words Or Equivalent. In The Design Documentation, The Description Of The Subject Of The Contract Refers To Standards And The Offered Service Does Not Have To Comply With The Required Standards, But The Contractor Is Obliged To Prove In The Offer That The Proposed Solutions Meet The Requirements Set Out In The Description Of The Contract To An Equivalent Degree. The Description Of The Subject Of The Contract Was Constructed By Specifying The Performance Or Functionality Requirements, I.E. In Accordance With Art. 101 Sec. 5 And Sec. 6 Of The Public Procurement Law, The Contractor May Refer To The Compliance Of The Services Offered With The Relevant Standards, If They Relate To Performance Or Functionality Requirements Specified By The Contracting Authority. In Such A Situation, The Contractor Demonstrates That The Building, Delivery Or Service Meets The Performance Or Functionality Requirements Specified By The Employer. Indicated In Particular In The Bill Of Quantities (Concerning, Among Others: Reconstruction Of The Road, Construction Of Sidewalks And Exits, Replacement Of Drainage Elements, Greenery Arrangement And Maintenance, Marking And Traffic Organization), Excluding Activities Performed By Persons Performing Independent Technical Functions In Construction, Such As: Managing Construction Works, Construction Management, Construction Service, Documenting The Construction Process, Organizing Work On The Construction Site, Supervision Over The Implementation Of Construction Works, And Excluding Activities Related To Construction Services, Such As: Geodetic Services, Administrative Services. Signing The Contract, With Regard To Persons Who Will Be Directed To Perform The Contract, Will Document To The Employer The Fact Of Employing Persons Involved In The Performance Of Activities Indicated In The Tor (Point 3.1.) Information On The Contractors Obligation To Perform Key Parts Of The Contract In Person.