Quotation Are Invited For Supply Of 11Kv Feeder & Remote Control Panel, (Vcb), Mcb, Etc

Quotation Are Invited For Supply Of 11Kv Feeder & Remote Control Panel,(Vcb),Mcb, Etc.Required For Phase-Ii Of Mew Supply Of Hps Pump At Gc-04. Assembly, 11Kv Feeder & Remote Control Panel, Transformer Feeder Panel, Vacuum Circuit Breaker (Vcb), Busbars, Resin Cast Current Transformer, Protection Relay, Meter, Aux Relays, Switches, Pushbuttons, Mcb, Etc. Supply Of Materials For Extension Of 11Kv Feeder & Remote Control Panel Containing The Following Components For Hps - A & C (Phase-Ii) At Gc-04, 07 & 21. 1. Transformer Feeder Panel 1.1.) 11 Kv, 31.5 Ka, 630 A Outgoing Feeder 1 No. Type: Eto/21/0042 2. Vacuum Circuit Breaker (Vcb) 2.1.) 11 Kv, 31.5 Ka, 630 A Vacuum Circuit Breaker --- 1 No. 3. Busbars 3.1.) Set Of Copper Busbars Rated 800A With Heat Shrinkable Sleeves -- 1 Set. 4. Resin Cast Current Transformer 4.1.) 200/1 A, 15Va, Class 5P10 (Protection) -- 3 Nos. 4.2.) 200/1 A, 15Va, Class 1 (Metering) --- 3 Nos. 5. Protection Relay 5.1.) Non Directional Over Current & Earth Fault Protection Relay -- 1 No. 5.2.) Aux Relays For Receiveing Intertrip & Alarm From Both/ Each Hps Trains In Downstream --- 1 Set 5.3.) Intertrip Send And Receive Relay 1 No. 5.4.) Lockout Relay -- 1 No. 5.5.) Trip Current Supervision Relay -- 1 No. 5.6.) Relay Test Block -- 2 Nos. 6. Meter 6.1.) Ammeter 1 No. 6.2.) Digital Multifunction Meter -- 1 No. 6.3.) Test Block For Metering -- 1 No. 7. Set Of Control/Auxilliary Relays For Both/Each Hps Trains In Downstream 1 Set 8. Switches 8.1.) Cb Control Switch 1 No. 8.2.) Local-Remote Switch 1 No. 8.3.) Ammeter Selector Switch -- 1 No. 9. Set Of Indication Lamps For Both/Each Hps Trains In Downstream -- 1 Set 10. Set Of Pushbuttons -- 1 Set 11. Set Of Mcb -- 1 Set 12. Set Of Heater & Thermostat 1 Set 13. High Voltage Indicator With Support Insulator 1 Set 14. Surge Arrestor -- 3 Nos. Remote Control Panel (B) Mimic Details For 1 No. Of Feeder 1. Meter 1.1.) Ammeter -- 1 No. 2. Set Of Indication Lamps -- 1 Set 3. Set Of Push Buttons --- 1 Set 4. Switches 4.1.) Ammeter Selector Switch 1 No. 4.2.) Breaker Control Switch -- 1 No. 5. Set Of Mimics -- 1 Set Cubicle Details 1. Panel 1.1.) 11Kv Mimic Remote Control Panel --- 1 No. 2. Set Of Mcb 1 Set 3. Set Of Heater And Thermostat -- 1 Set 4. Illumination Lamp -- 1 No. Notes: 1.) Shall Be From Koc Approved Manufacturers List: Vec Code: 18.04 Transformers Vec Code: 49.00 Protective Relays Other Items - From Any Reputable Manufacturers. 2.) Shall Conform To The Following Koc Standards: Koc-E-005, Power Transformer Koc-E-009, For Lv Switchgear Koc-E-003, Design Basis & Electrical System Koc-E-006, Power System Studies, Protection & Control 3.) Sat Shall Be Conducted By The Vendor As Per Koc Procedure With No Additional Cost To Koc 4.) Fat Shall Be Conducted & Reports Should Be Submitted By The Vendor As Per Koc Practices. 5.) Supervision & Assitance To Maintenance Team During Commissioning Shall Be Provided By The Vendor With No Additional Cost To Koc. 6.) Vendors/Bidders Shall Arrange A Site Visit For The Orientation Of 11Kv Feeder And Rcp And Complete Details With No Additional Cost To Koc. 7.) Manufacturers Technical Catalogue/Datasheet/Set Of Dwgs With Full Dimensions Shalll Be Provided Along With The Offer. Rfq Fee Amount : 75.000 Bid Bond Amt / % : 1,000.000 Tender Link :