Tenders Are Invited For Purchase Of A New Garbage Truck

The Subject Of The Order Is The Delivery Of A New Vacuum Truck With The Following Parameters And Equipment: I Chassis.1 Brand New Two-Axle: Year Of Production 2023 I.2 Gvw From 15 To 20 T, I.3 Drive: 4X2i.4 Wheelbase: Max 4200 Mm I.5 Engine :I.5.1 Power: Min 300 Hp,I.5.2 Exhaust Emission Standard: Euro6,I.6 Differential Lock,I.7 Gearbox:I.7.1 Manuali.7.2 Min 9 Gearsi.8 Power Take-Off Adapted To Work Together Body Pumps I.9 Main Power Switch - Manual Mounted On The Batteries I.10 Front Suspension: Mechanical, Load Capacity Min 7.5 Ti.11 Rear Suspension: Pneumatic, Load Capacity Min 13 Ti.12 Fuel Tank: Min 150 L, I.13 Adblue Tank: Min 20 L, I.14 Cab Interior/External Equipment: I.14.1 Color - Whitei.14.2 Adaptive Cruise Control With Front Collision Warning Systemi.14.3 Drivers Seat - Pneumatic With Adjustable Lumbar Support, Heated I.14.4 Windscreen Tinted, Heatedi.14.5 Double Passenger Seati.14.6 Radio With Bluetooth Function,I.14.7 Electrically Operated Rear-View Mirrors, Heated,I.14.8 Steering Column With Tilt And Height Adjustmenti.14.9 Airbag For The Driver,I.14.10 Air Conditioning,I. 14.11 Two-Door Central Locking With Remote Control (2 Pcs)I.14.12 Lighting Beam Mounted On The Cabi.14.13 Steel Front Bumperi.14.14 Two-Headlight Front Lightsi.14.15 Daytime Running Lightsi.15 Rear Underrun Protection Bar:I.15.1 Grooved From Abovei.15.2 Aluminumi. 15.3 Rear Lights Hidden In The Underrun Protection Bar I.16 Front And Rear Tires 315/80 R22.5I.17 Spare Wheel 315/80 R22.5 Mounted To The Chassis Or Delivered Loose I.18 Warning Triangle, Jack, First Aid Kit, Tire Inflation Hose, Wedge Ii.1 Tank: Ii.1.1 Cylindrical Tank Mounted On An Intermediate Frame, Inclined At An Angle Of 0 To 1 Degree Ii.1.2 Made Of Sheet Metal With A Thickness Of Min. .A In White Or Orange Ii.1.4.B Epoxy Primer: Min 80 Micron Ii.1.4.C Topcoat: Min 60 Micron Ii.1.5 Internal Painting: Ii.1.5.A Water Chamber: Epitan Type Paint Min 40 Micron Ii.1.5.B Sediment Chamber: Epitan Type Paint Min 40 Microns Ii.1.6 Permissible Operating Range: -0.8 Bar To 0.5 Bar Ii.1.7 Total Capacity Of The Tank: Min 10 000 L Divided Into A Sediment And Water Chamber In The Ratio Of 20% Water 80% Sludge, Ii.1.8 Tank Lifted By A Front Cylinder To The Angle Of Min. 20 Degrees Ii.1.9 Breakwater: Min 1 Piece (With The Possibility Of Unscrewing) Ii.1.10 Filling The Water Chamber Through The Storz C Inlet Connection, Pre-Filter And Anti-Pollution System (Free Inlet From The Top With A Closing Bolt) Ii.1.11 Inspection Hatch In The Water Chamber Min Dn450ii .1.12 Water Level Indicator In The Form Of A Polycarbonate Pipe In A Stainless Steel Metal Casing, Calibrated Every 100 L.Ii.1.13 Possibility Of Cleaning The Water Level Indicator From The Top Through The Storz Cii Connector.1.14 Sediment Level Indicator Mounted On The Rear Bottom In The Form Of A Metal Float Ball Inside Tank And Pointer And Scale. The Scale Is Made Of Stainless Steel, Laser-Cut With A Scale Of 500 L. Ii.2 Tank Casing: Ii.2.1 Open Hose Gutters Are Mounted On The Right And Left Sides Of The Tank. Gutters Made Of Stainless Steel. Ii.2.2 Gutters With Raised Sides, Open At The Ends, With Rounded Edges Enabling Hoses To Be Arranged Through Hooks On The Rear End. Ii.2.3 Gutters Equipped With Fastenings For Fastening Hoses And Drains With Ball Valves. Ii.2.4 Small Cabinet Tools, Pressure Nozzles - Min 1 Bucket Made Of Stainless Steel. Ii.2.5 Perforated Waste Box Made Of Stainless Steel With Hooks For Manholes, Mounted On The Rear Left Side Of The Vehicle. Ii.2.6 Advertising Boards Mounted On Both Sides Of The Tank (Text Of The Inscription In Agreement With The Employer) Ii.2.7 Mounting On Bollards, Tools Ii.2.8 Mounting On Wheel Wedges Ii.3 Rear End Cap Ii.3.1 Hydraulically Opened And Locked Ii.3.2 Cylinders Lifting The Rear Cap With Hydraulic Locks Ii.3.3 Protection Against Uncontrolled Opening And Closing Of The End Cap Ii. 3.4 Sealing The Bottom With An Oil-Resistant Gasket With A Minimum Cross-Section Of Fi 42Ii.3.5 Top Supplementary Connection Dn100 Or Dn110 With A Ball Valve And A Pipe Inside The Tank At ¾ Of The Height. Perrot Or Storz Connection.Ii.3.6 Bottom Suction And Discharge Connector Dn100 Or Dn110 With A Ball Valve Mounted In The Lowest Point Of The Bottom. Perrot Or Storz Connection. Ii.3.7 Sink Gutter Under The Connections Made Of Stainless Steel For Lifting The Tank. Ii.3.8 Unscrewable Hooks Mounted On The Bottom For Laying Suction Hoses. Hooks Made Of Stainless Steel. Ii.4 Suction-Force System Ii.4.1 Vacuum Pump: Ii.4.1.A Vane Type Ii.4.1.B Liquid-Cooled Ii.4.1.C Pump Capacity Min 1000 M3/H Ii.4.1.D Hydraulic Drive Ii.4.1. E Mounted Behind The Cab On The Intermediate Frame Ii.4.2 Non-Disconnectable Suction And Discharge System For Working With A Raised Tank Ii.4.3 Multi-Stage Vacuum Pump Protection System: Ii.4.3.A Transport Protection (Butterfly Valve) Activated Automatically While Driving Ii.4.3.B Overflow Protection In In The Form Of A Valve With A Metal Float Ball At The Highest Point Of The Tank Ii.4.3. C Sludge/Centrifuge With A Float Ball Inside Ii.4.3. D Separator Overflow Sensor Disconnecting The Vacuum Pump Ii.4.3. Air Filter Made Of Stainless Steel 500 Microns, In An Aluminum Housing With A Ball Valve Ii.4.5 Silencer Equipped With A Sink Connection With A Ball Valve Ii.4.6 Pneumatically Controlled Four-Way Valve Enabling Setting In The Position: Suction/Atmosphere/Discharge Ii.4.7 Possibility Of Simultaneous Operation Of The Suction And Pressure Systemsii. 5 High Pressure System: Ii.5.1 Pressure Pump: Ii.5.1.A Flow: Min 120 L/Min Ii.5.1.B Pressure: Min. 160 Bar Ii.5.1.C Hydraulic Drive Ii.5.1.D Mounted On Intermediate Frame Behind Cab Ii.5.1.E Pump Overload Valve Ii.5.2 Pneumatic Water Purge Ii.5.3 Stainless Steel Water Filter, 300 Micron Ii.5.4 Pump Protection Dry In The Form Of An Audible And Visual Signal And Pump Shutdown Ii.6 Pressure Drum Ii.6.1 Made Of Stainless Steel Ii.6.2 Mounted At The Rear Of The Body On The Right Side Ii.6.3 Drum Capacity 60 M Dn13 Textile Braided Hose Ii.6.4 Manual Hose Guidance Ii.6.5 Drum Drive – Hydraulic With Free Run For Manual Unwinding Of The Hose Ii.7 Water Heating System Enabling Operation In Winter Ii.7.1 Possibility Of Operation In Temperatures: - 15O Cii.7.2 Power Supply From The Chassis Fuel Tank Ii.7.3 Circulation Pump Ii.7.4 System Connected To The Water Tank And The System High-Pressure System In A Closed Circuit.Ii.7.5 The System Working While Driving A Carii.7.6 The System Working With A Pressure Pump During Water Heatingii.8 Controls:Ii.8.1 Control Panel In The Cabin:Ii.8.1.A Main Switchii.8.1.B Work Lightingii.8.1. C Warning Lightingii.8.1.D Heating System Switchii.8.2 Main Control Panel:Ii.8.2.A Made Of Stainless Steel With A Doorii.8.2.B Illuminated With Led Stripii.8.2.C Low Water Alarm And Visual Signalii.8.2.D Counter Water Pump And Vacuum Pump Operation Time Ii.8.2.E Engine Speed Indicatorii.8.2.F Engine Speed: - / +Ii.8.2.G Vacuum Pump: Off/Onii.8.2.H Suction Pump: Off/Onii.8.2.I Mode Operation Of The Suction Pump: Discharge/Atmosphere/Suctionii.8.2.J Locks: Close/Openii.8.2.K Bottom: Close/Openii.8.2.L Hoist Of The Tank: Lower/Liftii.8.2.M Pressure Hose: Roll Up/Unwindii.8.2. N Safety Switchii.8.2.O Electronic Time-Delayed Lock To Prevent Accidental Opening Of The Boltsii.8.2.P Remote Control Switchii.8.2.Q Pressure Regulating Valveii.8.2.R Water Pressure Gauge From 0 To 250 Barii.8.2.S Manovacuometer Equipped With A Valve Vent And Drain Pipe Located In A Clearly Visible Place Ii.8.3 Remote Control; Ii.8.3.A Engine Speed: - / +Ii.8.3.B Vacuum Pump: Off/On Ii.8.3.C Pressure Pump: Off/On Ii.8.3.D Pressure Hose: Retracting/Uncoilingii.8.3.E Safety Switchii.9 Equipment:Ii.9.1 Reversing Camera With Monitor In The Drivers Cabinii.9.2 Pressure Gun With Two Nozzlesii.9.3 Pressure Nozzles For Channel Cleaning: Min 2 Pieces (Rinsing, Piercing)Ii .9.4 Hooks For Lifting Manholes Ii.9.5 Central Lubrication System (Min.: Upper Bolts, Tank Lifting Cylinder, Four-Way Valve) Ii.9.6 Wrenches For Storz Connections Ii.9.7 Wrenches For Pressure Nozzles Ii.9.8 Hose Dn110, 2 Pcs, Approx. 3 M Ii.9.9 Hose Dn110 1Sz Approx. 8M Depending On The Location Ii.9.10 Hose Dn13 - 60M In A Textile Braid Ii.9.11 Hose Protection In The Duct Ii.9.12 Remote Control Ii.9.13 Warning Lamps, Orange: 2 Pieces On The Back Of The Building Ii.9.14 Hose For Filling The Water Chamber Ii.9.15 Sink Hose From The Separator Ii.9.16 Work Lamps, White: On The Left And Right Side (2 Pcs. Per Side)