Quotation Are Invited For Dismantling, Supply, Install, Commissioning And Warranty (Pump) For Upgrading Fattrap Including Repair And Coating Cement Surrounding

Quotation Are Invited For To Dismantling, Supply, Install, Commissioning And Warranty (Pump) For Upgrading Fattrap No 1, 2 & 3, Including Repair And Coating Cement Surrounding. Cleaning Sump And Install Safety Railing For 5 Units Of Fattrap. Specification:- 1. Centrifugal Pump And Motor - 1 Set - Flowrate: 20 M3/Hr - Head: 60 M - Inlet/Outlet Him.: 50 Mm - Medium: Water - Casing/Impeller/Shaft: Ss316/Ss316/Ss316 - Motor Required: 4 Kw 2880 Rpm, 415V/3Phase/50Hz Warranty 1 Year For Pump & Motor 2. High/Low Water Level Cut-Off Sensor. - 1 Set - Model: Anly - Type: Aps-3 Electrode Holder - Pump And Motor Installation I. 3 "G.I Elbow Weld End - 2 Pcs Ii. 3 "G.I Pipe - 1 Light Iii. 3 X 2 "Reducer Weld End - 2 Pcs Iv. 3 "S/S Check Valve - 2 Pcs V. 3 "S/S Flanges 10K - 4 Pcs Vi. 2 "G.I Elbow Weld End - 1 Pc Vii. 2 "G.I Pipe - 1 Light Viii. 2 "Butterfly Valve - 2 Pcs Ix. 2 "S/S Flanges 10K - 12 Pcs X. 5/8 "X 2 ½" M/S Bolt Nut - 16 Pcs Xi. 5/8 "X 4 ½" M/S Blot Nut - 24 Pcs Xii. 2 "S/S Non Return Valve - 2 Pcs Scope Of Work:- Preparation 1. Accommodation & Traveling 2. Site Visit 3.To Provide Safety Equipment S & Ppe (Personal Protective Equipment S) To Workers. Job Content 1. Cleaning The Sump Of Fat Trap No 1, 2, 3, 4 & 5. Residue Should Be Carry Out Of Premise 2. Install Railing With Yellow Coating For Fat Trap No 1, 2, 3, 4 & 5. 3. Break The Existing Damaged Cement And Re-Do The Cement To Surround The Fattrap (For Fat Trap No 1,2 & 3), Including Paint (Gray) 4. Dismanting Of Existing Pump And Motor For Fattrap No 1. 5. Supply 1 Unit Of Centrifugal Pump And 1 Unit Of Water Level Sensor Base On The Specific Given Above Including Installation And Commissioning (Fattrap No 1) 6. Supply Parts For Installation Of Pump And Motor Base On The Specific Given Above (Fattrap No 1) Finishing - Housekeeping And Trash Cleaning Should Be Vendors Responsibility. Other - Warranty Pre-Tender Start Date: 28/3/2023 11:32Am Tender Release Date: 28/3/2023 11:30Am Tender Closing Date: 10/4/2023 9:29Am [Disclaimer: The Above Text Is Machine Translated. For Accurate Information Kindly Refer The Original Document.] Tender Link : Https://Ep.Fgvholdings.Com/Sitepages/Quotation.Aspx?Tenderid=206472