Tenders Are Invited For Adaptation Of The Rooms Of The Former House Of Saint Faustina In Gołdap For The Needs Of The Complex Of Educational And Educational Institutions In Gołdap.

1. The Subject Of The Contract Is Adaptation Of The Rooms Of The Former House Of Saint Faustina In Gołdap For The Needs Of The Complex Of Educational And Upbringing Institutions In Gołdap. The Task Is Implemented From The Funds Of The Covid-19 Prevention Fund For Local Government Units.2. Location: City: Gołdap, Obt. Registration Office Gołdap, Ul. Wojska Polskiego, Registration Plots Marked With Registration Numbers: 1042/3 And 1042/4, Gołdap District, Province Warmia And Mazury.3. The Scope Of The Contract Includes: Reconstruction And Change Of Use Of The Kitchen Into Rooms For Didactic Purposes, Along With Back-Up Rooms And A Sanitary Facility. Changing The Use Of The Former Kitchen And Accompanying Rooms Of The Extension Located On The Ground Floor On The North Side Into Three Teaching Rooms With Back-Up Facilities And A Sanitary Facility (Womens And Mens Toilets And Toilets For The Disabled). The Rooms Will Be Created By Demolishing The Existing Partition Walls And Making New Partitions Into Two Rooms For 20 People, One For 45 People And Enlarging Two Windows. In Order To Ensure Ventilation In The Sanitary Facility, The Addition Of A Chimney On The Flat Roof With The Outlet Of The Pipes Above The Adjacent Roof. The Teaching Rooms Should Be Ventilated Based On The Existing Fireplaces On Which Hybrid Turbovents Should Be Installed, Ensuring The Exchange Of 0.5-2 Per Hour (Chimney Cowls Supporting The Chimney Draft). And Designed. For Safety Reasons, When Replacing Windows, Railings With A Height Of 110 Cm And Openwork Not Larger Than 12 Cm And Wooden Radiator Covers Made In Accordance With The Provisions Of The Regulation Of The Minister Of Infrastructure Of 12 April 2002 On The Technical Conditions To Be Met By Buildings And Their Location /I.E. Journal U. 2019, Item 1065/. Partitions In Bathrooms As Light Partitions Made Of Hpl System Boards Made To The Investors Request In An External Company Supplying The Above. In The Bathroom For The Disabled, A Set Of Holders With Certificates Should Be Installed. From The Ceiling, The Wall Should Be Dilated With Polyurethane Foam. B) Lintels Type N And L19. C) Plasters - Smooth, Cement-Lime Plasters, Category Iii; White Color Ral 9010. D) Conduits Of The Water Supply System Should Be Made Of Copper Pipes Connected By Means Of Soldered Connections. They Should Be Carried Out On The Walls And In The Grooves In The Walls Of The Building. Each Water Supply Node Shall Be Equipped With Shut-Off Ball Valves. After Making The Connection To The Existing Installation, Water Meters Should Be Installed On Each Outgoing (Water, Hot Water, Circulation). 0.10M; ,050M. Sewage Risers Should Be Equipped With Cleaners. End The Riser With A Ventilator Led Above The Roof Or Automatic Air Vents. Connect The Sewage System To The Existing Sanitary Sewage System. Central Heating Installation Distribution Lines Made Of Copper Pipes Should Be Run Along The Walls, Under The Floors Of The Rooms Or On The Walls Of The Rooms. Temperature Regulation Of Individual Rooms Is Provided By Means Of Thermostatic Heads Mounted At Each Radiator. The Power Supply Of The Installation Is Designed From The Existing Heating Node, Located In The Basement Of The Building. E) Sanitary Rooms: In The Bathrooms, Tiles Up To 2M High; Floor Drains, Water Tap, Toilet Cubicle Partitions - System Partitions Made Of Hpl Board, Minimum Height 2 M, Maximum Floor Clearance 15 Cm, A 150/150 Wheelchair Maneuvering Area Is Provided, Toilet And Wash Basin Equipped With Auxiliary Handles. Complete The Façade With Thin-Layer Structural Plaster In The Color Of The Existing Façade. G) Pvc Windows In White Color According To The Woodwork List. H) External Window Sills Made Of White Coated Sheet.