Tenders Are Invited For Construction Of The Active Tourism Center In The Design And Build Formula

The Subject Of The Contract Is The Performance In The Design And Build Formula Of Tasks Under The Name Construction Of The Active Tourism Centre, Stage Iii, Conference And Recreation Center According To The Functional And Utility Program, Stage 3, Including Design Work And Construction Work Consisting In The Construction/Assembly/Creation Of: - Conference And Recreation Area With A Recreational Shelter, A Grill And An Observation Deck On A Green Roof (Building No. 2), - Green Areas With Small Architecture, - Construction Of Pedestrian Paths, - Reconstruction Of The Existing Power Network, - Necessary Networks, Connections And Installations Taking Into Account Technology At Least Energy-Efficient, - Visual Identification Design For The Facility, Taking Into Account The Design Assumptions For The Entire Assumption, - Visual Identification Design For The Purposes Of Marking The Facilities Characteristic Of The Stage - Consistent With The Analogous Design For The Previous Stages. Recreational And Recreational Building (Building No. 2) In The Shape Of A Long Cuboid Inserted Under The Meadow Into A Natural Slope. A Single-Storey Building (Due To Being Inserted Into The Terrain) As A Whole Underground Storey. The Building In The Form Of A Background For The Last Row Of Fruit Trees With Structural Divisions Or Divisions In The Joinery Referring To The Rhythm Of Plantings. Basically, The Roof Of The Building Is Flat, Utilitarian (Or Shed Roof To Obtain The Desired Heights) Made In The Green Roof Technology. Optically, The Roof Is An Extension Of The Meadow (The Species Composition Of Plants On The Green Roof Is Selected So That The Border Between The Natural Ground And The Vegetation On The Roof Is Not Visible). In Addition, There Is An Entrance To The Roof In The Form Of A Smoothly Sloping Roof To The Level Of The Floor On The South Side Of The Building (The Impression Of A Sloping Meadow). In The Direction Of The Gable Walls, The Roof Was Extended With Cantilevers (Or On Poles, Depending On The Adopted Structural And Economic Solutions). Recreation Areas (Barbecue Shed, Picnic Area) Are Located Under The Protruding Roof Tiles. The Building Has A Representative Entrance Under The Arcade With A Terrace Protruding Towards The Orchard. A Multifunctional Building Enabling The Organization Of Conferences, Local Events, Workshops For Children And Adults, Etc. A Welcome Hall With An Interactive Screen, Logo Or Other Element Specified On The Basis Of A Construction Project In Agreement With The Employer. The Building Has Two Multifunctional Rooms, One Of Which Is Suitable For Conferences For Min. 100 People, Equipped With Multimedia Equipment And A System That Allows You To Darken The Room (Blinds, Windows With Variable Transparency Or Other). Connecting Rooms. It Is Assumed That The Facility Will Be Equipped With A Kitchen For Serving Ready Meals, Which Will Also Enable The Organization Of Culinary Workshops. In Front Of The Building, There Is A Wide Path Running Parallel To The Facade Of The Building, Allowing For A Walk Between Rows Of Trees With Squares At Intersections. By The Paths And On The Observation Deck, There Are Various Proposals For Seats: Permanent Deckchairs, Blankets, Picnic Tables, Couches, Beach-Type Baskets, Etc. The Subject Of The Contract Concerns The Preparation Of Design Documentation (Construction And Executive Designs, Technical Specifications For The Execution And Acceptance Of Construction Works), Obtaining On Behalf Of The Employer Necessary Decisions And Arrangements, Execution Of Construction Works With Water And Sewage Connections. And Power Engineering, As Well As Services And Accompanying Works Necessary For The Proper Performance Of The Contract. The Employer Requires The Implementation Of The Subject Of The Task In The Following Order: 1) Stage I: The Scope Of This Stage Includes: A) Stocktaking Of The Area Covered By The Program To The Extent Enabling The Preparation Of Complete Design Documentation For The Entire Project And Preparation Of A Map For Design Purposes, B) Stocktaking Of The Greenery Of The Area Covered By The Program In To The Extent Enabling The Preparation Of Complete Design Documentation For The Entire Project, C) Preparation Of The Necessary Expert Opinions, D) Preparation Of Geological And Engineering Documentation To The Extent Necessary To Implement The Investment - 2 Copies, E) Obtaining A Decision On The Location Of The Public Purpose Investment / On The Conditions Of Development, F ) Preparation Of A Water Law Survey With Obtaining A Water Law Permit In The Form Of A Decision For Design Solutions, If The Design Solutions Used Will Require It, G) Preparation Of Documents Necessary To Carry Out The Environmental Impact Assessment Procedure Showing No Negative Impact On Ę Nature And Protection Of The Landscape Of The Protected Landscape Area, If Required (Applies To Projects Potentially Affecting The Area Of ​​The Protected Landscape Area), H) Obtaining All The Necessary Arrangements, Opinions And Administrative Decisions Required Under Polish Law To Design, Build, Launch And Hand Over The Facility To Operation, I) Preparation Of A Construction Project To The Extent Necessary To Obtain A Valid Administrative Decision (Building Permit) With Obtaining Arrangements, Opinions, Permits And Other Arrangements Resulting From The Regulations Necessary To Obtain An Occupancy Permit (5 Copies In Paper Form And In Electronic Form - E.G. Cd), J) Preparation Of Detailed Designs And Technical Specifications For The Execution And Acceptance Of Works In Accordance With The Requirements Contained In The Regulation Of The Minister Of Infrastructure Of September 2, 2004 On The Detailed Scope And Form Of Project Documentation, Technical Specifications For The Execution And Acceptance Of Construction Works And The Functional And Utility Program Broken Down By Industries (4 Copies In Paper Form And In Electronic Form - E.G. Cd). K) Technical Specification For The Execution And Acceptance Of Works (4 Copies In Paper Form And In Electronic Form - E.G. Cd), L) Bill Of Quantities (4 Copies In Paper Form And In Electronic Form - E.G. Cd), M) Investors Cost Estimate (4 Copies In Paper Form And In Electronic Form - E.G. Cd), N) Visualization Of The Designed Investment, O) Visual Identification In The Form Of A Brand Book Containing A Detailed Description Of The Visual Identification Of The Designed Brand And A Set Of Rules For Its Application. The Project Must Include: - A Detailed Description And Graphics Of The Logo/Signet Ring Along With The Genesis Of Its Creation (Defining The Basic Form Of The Sign, Construction, Protective And Basic Fields, Colors, Typography, Scaling And Modification Of The Sign - Rules For Use On Elements Of Street Furniture And Furniture, Leaflets, Website Website, Folders, Cars, Bicycles And Other Elements Specified To Be Provided By The Contractor. P) Agreeing On Material Solutions With The Ordering Party, Q) Holding, As Part Of The Offer Remuneration, At Least Five Consultations With The Ordering Party During The Preparation Of The Subject Of The Order, Along With The Possibility Of Submitting Comments By The Ordering Party, R) Submitting An Application For A Building Permit Decision, With The Proviso That The Contractor May Not Withdraw The Application Or Suspend The Proceedings Without The Consent Of The Employer, Applicable Pr Technical And Construction Records And That It Is Complete From The Point Of View Of The Purpose It Is To Serve, A Statement Regarding The Transfer Of Copyrights. Commencement Of Construction Works Along With The Submission Of Complete Design Documentation Referred To In § 1 Section 4 Point 2.2) Stage Ii: The Scope Of This Stage Includes: A) Official Takeover Of The Construction Site, B) Execution Of Construction Works In Accordance With The Developed Design Documentation And Issued Administrative Decisions And Arrangements, C) Authors Supervision During The Works, D) Ensuring The Necessary Supervision, E.G. Dendrological With The Valuation Of Wood Obtained From Felling, Archaeological, Sapper And Other Necessary For The Implementation Of The Project, E) Preparation Of Complete As-Built Documentation Along With Geodetic Inventory (In 3 Copies), F) Preparation Of Operating And Maintenance Instructions In Polish ( 2 Copies In Written Form And In Electronic Form - E.G. A Cd). The Scope Of Construction Works Includes: - Earthworks, - Excavations For The Foundations Of Buildings, - Elements Of Street Furniture (Which Require Foundations), - Foundation Footings For Wooden Platforms, - Excavations For Connections, - Excavations For Laying Appropriate Road Layers (Paths, Roads, Car Parks), - Execution Of Buildings, - Assembly Of Window And Door Joinery, - Execution Of Appropriate Layers Of Roofs, - Execution Of Finishing Works, - Execution Of Appropriate Earth Layers Before Planting Plants, - Planting Of Tall, Medium And Low Plants, - Assembly Of Landscaping Devices, - Performance Of Cleaning Works Aimed At Bringing The Land To Acceptance And Use. The Scope Of Installation Works Includes: - Execution Of Installation Connections, - Low-Voltage Power Installations, - Execution Of Internal Installations, - Assembly Of The Automation System, - Tests Of The Installation And Checking The Correct Operation Of The Equipment, Commissioning Of The System In The Entire Area And Necessary Adjustments.