Tenders Are Invited For Z.1 - Construction Of A Sports Field At The Primary School In Buszków (...) Z.2 - Renovation And Reconstruction Of The Sports Field At The Primary School In Sitowiec

Task 1 - Construction Of A Sports Field At The Primary School In Buszków Along With The Development Of Green Areas - Reconstruction Of The Existing Road Lighting Networks - Removal Of Collisions; Plots No. 147, 148, 149 In The Town Of Buszkowo, Municipality Of Koronowo.I. The Scope Of Works In The Construction Industry Includes The Construction Of: A Multifunctional Sports Field, Fencing, A Table Tennis Table, A Bicycle Shelter, Gazebos, Small Architecture Objects (Benches, Litter Bins), Hardening Of The Area, Renovation Of Stairs, Renovation Of The Lawn, Street Lighting Lamps, Demolition Of The Existing Surface, Fencing, Small Architecture Objects, Flagpole.1. Preparatory/Demolition Works: - Disassembly Of Concrete Surfaces With Concrete Edges, - Disassembly Of The Area Fencing: Panel Fencing With Foundation And Mesh; Disassembly Of Fence Posts With Foundations, - Disassembly Of A Flagpole With A Foundation, - Disassembly Of Benches With A Foundation, - Demolition Of Pavement Base Layers, - Loading And Removal Of Dismantled Pavements, Elements Of Fencing And Small Architecture, Rubble And Other Waste, Tidying Up The Area.2. Construction Of A Multifunctional Pitch With Dimensions Of 12.5X19.5: A) Structural Layers Of The Surface: - Epdm - Thickness 2-3 Mm, - Sbr - Thickness 10 Mm, - Et Subbase - Thickness 35 Mm, - Leveling Layer, Wedge 0 - 4.00 - Thickness 10 Mm, - Broken Aggregate 0-31.5 Mm - Thickness 200 Mm, - Sand Drainage Layer - Thickness 150 Mm. Lean Concrete. There Are Mounted Posts With A Closed Profile Ø 76X3mm, Length Approx. 7M, Height 600 Cm Above Ground Level, Hot-Dip Galvanized, Powder Coated. B) Equipment: - Permanent Marking Of The Pitch Line - Fencing Of The Pitch Made Of Polypropylene Mesh With A Mesh Size Of 45X45 Mm - Basketball Baskets - 3X2 M Goals - Volleyball Net - Ball Net Made Of Synthetic Mesh Around The Fence - Wicket And Gate Concrete Edging Should Be Made Around The Space Covered New Surface. Concrete Edging, Prefabricated 8X30 Cm.3. Construction Of A Wooden Shed With Dimensions Of 4X7.5X2.52 M: A) Foundation On Footings With Dimensions Of 40X40x94cm. Poles Fixed To The Foundation With A Fixing Anchor; B) Equipment: - Table - Benches4. Small Architecture Objects: - Table Tennis Table - Bench With Backrest - Bench Without Backrest - Semi-Circular Bench - Waste Bin - Bicycle Shelter With A Rack For 12 Bicycles. 5. Roofing Over The Existing Stairs Made Of Aluminum Profiles Covered With Chamber Polycarbonate Panels. Fixed To The Wall Of The Building.6. Surface Hardening: A) Structural Layers Of The Surface: - Concrete Paving Stones 20X10 Cm - Thickness 6 Cm, - Cement-Sand Bedding 1:4 - Thickness 4 Cm, - Foundation Made Of Natural Aggregate Hydraulically Bound With Cement, Strength Class C3/4 - Thickness 15 Cm, - Cut-Off Layer Made Of Sand - Thickness 10 Cm. B) Edging Along The Perimeter Of The Hardened Surface. Concrete Edging, Prefabricated 6X20 Cm.7. Execution Of The Panel Fence: - Concrete Footings On Lean Concrete, Dimensions 30X30x85cm, Made Of C25/30 Concrete. There Are Embedded Posts With A Closed Profile 60X40x210 Cm; - A Concrete Foundation With Dimensions Of 6X20x250 With Connectors With Dimensions Of 20X20cm; - Fence Panels, Length 250 Cm, Height 123 Cm. Galvanized, Powder Coated, Made Of ∅4Mm.8 Wire. Renovation Of The Stairs By Covering Them With A Stone Carpet With An Area Of ​​20M2 Surface Layers: - Concrete Base Cleaned And Leveled; - Priming Layer 2-4 Mm; - Insulation Layer; - Two-Component Resin Primer; - Aggregate And Resin Mixture.9. Implementation Of The Stair Railing: - Posts With Dimensions 50X30x2;- Handrail With Dimensions 25X25x2; - Vertical Filling 20X20x1.5.10. Landscaping - Fertilizing Topsoil, - Strengthening The Ground With A Lawn Grid, Making Plastic Edging, - Sowing Grass. Ii. The Scope Of Works In The Electrical Sector Includes The Following: Reconstruction Of The 0.4 Kv Overhead Line Section Of The Existing Road Lighting Network.1. Disassembly Of A Lighting Pole And A Section Of The Overhead Line Of The Nn.2 Cable. Installation Of A New K-10.5/6 Lighting Pole With A Spun Concrete Pole, Type E, Together With An Extension Arm On Which The Lighting Fixture From The Previously Dismantled Pole Will Be Mounted. Designed Lighting Powered From The Existing Nn.3 Overhead Line. Implementation Of The Lightning Protection System On The Designed Lighting Pole.