Tenders Are Invited For Supply Of Stage Equipment Accessories

1. Acoustic Shield - 10 Pieces • The Canopy Of The Acoustic Shield Is Made Of Transparent Plexiglass • The Dimensions Of The Canopy Are 60 X 40 Cm (+/- 2 Cm) • The Base Of The Canopy Is Made Of A Metal Tube With A Diameter Of 25 Mm (+/- 2 Cm) Mm), Chrome-Plated • Insert Tube With A Diameter Of 20Mm (+/- 2 Mm) Chrome-Plated, Composed Of Two Sections - The Long Section Remains In The Base, The Short Section Remains Permanently Connected To The Canopy Without Protruding Beyond The Contour Of The Canopy, Which Facilitates The Tripods Transport • Base Tripod, Foldable Legs• Smooth Adjustment Of The Height Of The Cover - Minimum Height 105 Cm (+/- 3 Cm), Maximum Height 145 Cm (+/- 3 Cm), Measured From The Floor To The Top Of The Acoustic Cover • Adjustment Of The Angle Of Inclination Of The Sound Cover, Min. 20° • Weight From 3 To 5 Kg 2. Box For Exit Acoustic Shields - 1 Piece Specialized Transport Box For 10 Pieces Of Exit Acoustic Shields, Adapted In Size And Structure For Safe Transport Of A Set Of Shields As Above. • The Box Is Made Of Multi-Layer Plywood, E.G. Thickness From 8 To 10 Mm, Reinforced And Stiffened With Aluminum Profiles, With Rounded Metal Corners • Box Walls Covered With A Layer Of Dark Brown Synthetic Resin On The Outside • Equipped With 4 Transport Wheels, Including 2 Wheels With Brakes • Handles For Transporting The Box - 4 Pieces • Mortise Locks - 2 Pieces • Inside The Box, The Sides Are Lined With A Layer Of Rubber Foam With Grooves For Acoustic Shields, Each Cover Is Held Individually And Does Not Touch Other Covers, So There Is No Risk Of Damaging Or Scratching The Surface Of The Covers • The Box Is Equipped With A Separate Compartment For Metal Bases Of The Covers • External Dimensions Of The Box (Height X Width X Depth): 60 X 105 X 70 Cm (+/-3Cm)• Box Weight Without Acoustic Covers Up To 38 Kg3. Desktop Led Lamp - 60 Pieces• Lamp Equipped With 10 Led Diodes, Light Intensity Min. 280 Lux• Neutral White Light Color• Switchable Two Brightness Levels• The Light Source Is Mounted On A Flexible Arm, The So-Called Swan-Neck, 22Cm Long (+/- 2 Cm) • Battery Powered (3 X 1.5V Aa) Or 230V Mains Power Supply • Power Adapter Included, 3 X 1.5V Aa Batteries • W Cover For The Set Included • Housing Color Black • Weight Up To 0.4 Kg4. Box For Led Lamps - 1 Piece Specialized Transport Box For 60 Led Lamps, Adapted In Size And Construction For Safe Transport Of A Set Of Lamps• The Box Is Made Of Multi-Layer Plywood, E.G. Birch, 8 To 10 Mm Thick, Reinforced And Stiffened With Aluminum Profiles, With Corners • The Walls Of The Box Are Covered With A Layer Of Dark Brown Synthetic Resin On The Outside • Equipped With 4 Transport Wheels, Including 2 Wheels With Brakes • Handles For Transporting The Box - 4 Pieces • Mortise Locks - 2 Pieces • External Dimensions Of The Box (Height X Width X Depth): 60 X 105 X 70 Cm (+/-3Cm)• Weight Of The Box Without Lamps Up To 38 Kg5. Orchestral Desk Adapted For Trips - 60 Pieces• Tripod Base• Folding Desk Base• Stepless Height Adjustment Of The Desk In The Range Of 65Cm (+/-2Cm) To 120Cm (+/-2Cm) Without The Need To Block The Height With Clamping Elements• Tabletop Metal Desk In Black • Desk Top With The Possibility Of Detaching From The Base • Adjustable Angle Of The Desk Top • Desktop Top Width 50Cm (+/-2Cm)• Desktop Top Height 32Cm (+/-2Cm)• Desk Load Up To 4 Kg (+/-2Cm) - 0.5Kg)6. Transport Box For Desks - 3 Pieces• Special Transport Box For 20 Exit Desks Top + Tripod• Walls Of The Box Made Of Plywood With A Thickness Of 8 To 10Mm, Covered With A Layer Of Dark Brown Synthetic Resin On The Outside• Aluminum Profiles Protecting On All Edges Of The Box • Rounded Steel Fittings On The Corners Of The Box • Mortise Locks • 4 Wheels With A Rubber Tread With A Diameter Of Ø 100 Mm (+/- 10Mm), Including 2 Wheels With Brakes • A Partition Inside The Box Separating Desktops From Tripods • Transport Handles At Least 2 Pieces• External Dimensions (Height X Width X Depth): 55 X 75 X 50 Cm (+/- 5Cm) • Weight Of The Box Up To 26Kg (Without Consoles)7. Conductors Desk - 1 Piece • Wooden Top, Made Of Multi-Layered Hard Wood, E.G. Beech, Oak • Transverse Shelf Supporting Sheet Music Made Of Solid Hard Wood, E.G. Fixed To The Frame Below The Music Table • Smooth, Stepless Regulation Of The Table Top Angle Of Inclination In The Minimum Range Of 100° • Width Of The Music Table 72 Cm (+/- 4 Cm) • Height Of The Music Table Surface 44 Cm (+/- 4 Cm) Without Taking Into Account Music Shelf • Cross-Section Of The Desktop Insert Tube Ø 20 Mm, Length Of The Insert Tube Fixed To The Desktop 60 Cm (+/- 2 Cm) • Base Tube With A Cross-Section Of Ø 25 Mm • Desktop Top Mounted On An Insert Tube Inserted Into The Desktop Base • Desktop Base In The Form Pentapod• Weight Of The Desk With The Base From 8 To 10Kg• The Desk Top And The Shelf For Scores In A Color Matching The Desks Included At The Orchestra• Black Metal Elements Of The Desk• Smoothly Adjustable Height Of The Desk In The Range Of 84Cm (+/- 2 Cm) To 120Cm (+/- 2 Cm) Or More, Measured From The Ground To The Starting Point Of The Music Surface Of The Top• Additional Tube Included Allowing To Increase The Height Of The Desktop To 140 Cm (+/- 2 Cm). All The Equipment Referred To Above Must Be Covered By A Minimum 24-Month Warranty Period. The Ordering Party Allows The Possibility Of Submitting Tenders With Equivalent Products, Indicating That The Minimum Requirements To Be Met By Equivalent Products Are Those Specified In The Tor And Not Worse Than The Parameters Indicated In The Description Of The Subject Of The Contract.