Tenders Are Invited For Reconstruction Of Municipal Roads Ul. Cembrowski, Stumetrówka And Fr. Jadwiga In Żarów

1. The Subject Of The Contract Is The Performance Of Construction Works Aimed At The Construction And Reconstruction Of Municipal Roads In Żarów, Including: Reconstruction Of Municipal Roads At Ul. Cembrowski, Stumetrówka And Fr. Jadwigi In Żarów” 2. For The Subject Of The Contract Specified In Par. 1 Consists Of: Reconstruction Of Municipal Roads Ul. Cembrowski, Stumetrówka And Fr. Jadwiga In Żarów” In Accordance With The Building Design By Biuro Projektów I Inwestycji Progress Mgr Inż. Mariusz Szyrner, Ul. Stawowa 7, 58-150 Strzegom. The Subject Of The Contract Is The Reconstruction Of Municipal Roads At Ul. Cembrowski, Stumetrówka And Fr. Jadwiga In Żarów. The Scope Of Works Includes The Reconstruction Of A Dirt Road. The Designed State Does Not Assume Any Changes To The Existing Land Development, Which Is Currently A Road With An Unimproved Surface. The Route Of The Road Follows The Existing Road Serving The Adjacent Areas. The Scope Of Works Includes The Construction And Reconstruction Of Roadways, Pavements, Bicycle Paths And Parking Bays. In Addition, As Part Of The Implementation Of The Construction Project In Question, It Is Planned To Build A Rainwater Drainage Network And Build A Road Lighting Network, As Well As Reconstruct And Secure The Existing Networks In Order To Eliminate Collisions With The Designed Road System. Detailed Scope Of The Subject Of The Contract: A) Ul. Fr. Jadwiga Śląska In Żarów (Together With Extensions - Ul. H. Brodatego And Ul. B. Krzywoustego) With A Total Length Of 606.84 M: - Dismantling The Existing Sidewalks, Placing The Recovered Materials, I.E. Paving Stones, Curbs And Edges On Pallets And Transporting The Site Condemned By The Employer For A Distance Of Up To 5 Km, - Reconstruction And Extension Of The Municipal Road 110976D, 334.07 M Long, Which Will Have A Roadway Made Of Concrete Blocks 5.5 M Wide, A Double-Sided Pavement Made Of Concrete Blocks 1.5 M Wide – 2.0 M And A Bicycle Path Made Of Asphalt Concrete, 2.0 M Wide; - Reconstruction And Extension Of The Municipal Road 110970D With A Total Length Of 227.05 M, Which Will Have A Roadway Made Of Concrete Cubes 5.0 M Wide, A Sidewalk Made Of Concrete Cubes 2.0 M Wide And A Parking Bay For Passenger Cars For Perpendicular Parking With Concrete Blocks With A Width Of 4.50 M, The Road System Will Be Implemented As A Pedestrian And Road Route; - Reconstruction Of The Municipal Road 110849D With A Total Length Of 45.72 M, Which Will Have A Roadway Made Of Concrete Cubes 6.0 M Wide And Parking Bays On Both Sides For Passenger Cars For Perpendicular Parking Made Of Concrete Cubes 5.00 M Wide, - Construction Of A Sewage Network With A Total Length Of 703.30 M, Which Will Include Concrete Manholes Ø1000 And Ø1200, Channels With A Diameter Of Ø200 - Ø315 Made Of Pvc Sn8 (Solid) Pipes, And Traditional Street Sewage Inlets Set On Sewage Chambers Made Of Concrete Rings With A Diameter Of Ø500 Mm And Settling Tank With A Depth Of 0.7 M Along With The Construction Of A Retention And Evaporation Tank; - Construction Of A Low-Voltage Cable Line With A Rated Voltage Of 0.4 Kv For Road Lighting With A Total Length Of 665.25 M And Removal Of Power Grid Collisions. B) Ul. Cembrowskiego And Stumetrówka In Żarów - Reconstruction Of A Municipal Road With A Total Length Of 534.87 M, The Road Will Have A Roadway Made Of Concrete Cubes With A Width Of 3.5 M - 4.5 M, - Construction Of A Rainwater Drainage System With A Total Length Of 420 M, Consisting Of There Will Be Concrete Manholes Ø1000, Masonry Manholes Ø1200 And Plastic Chambers Ø425 And Ø630, Channels With A Diameter Of Ø200 - Ø315 Made Of Pvc Sn8 (Solid) Pipes, And Traditional Street Sewage Inlets Set On Sewage Chambers Made Of Concrete Rings With A Diameter Of Ø500 Mm And A Settling Tank With A Depth Of 0.7 M; - Construction Of A Low-Voltage Cable Line With A Rated Voltage Of 0.4 Kv For Road Lighting With A Total Length Of 204.30 M And Removal Of Power Grid Collisions. All Built-In And Installed Materials Should Have Attestations Allowing Them To Be Used, Safety Signs (For Required Materials) - In Accordance With The Requirements Of Polish Regulations. Soil From Excavated Material Related To Trenching For Improved Pavements And Other Elements From The Demolition Of Existing Pavements Should Be Fully Disposed Of In Landfills Intended For This Purpose. Construction Works Should Be Performed In Accordance With The Approved Construction Design. Any Deviations Should Be Consulted With The Authors Of The Project. Works Should Be Performed In Accordance With The Principles Of Technical Knowledge, Applicable Regulations And Standards - In Accordance With The Construction Art. The Scope Of Works Also Includes Other Works Necessary For The Proper Performance Of The Subject Of The Contract, Including: - Execution, Agreement And Approval Of Temporary Traffic Organization Designs For The Duration Of Construction Works, - Marking The Construction Site And Organization Of Construction Facilities, - Ongoing Removal Of Unusable Materials From The Construction Site To Waste Landfill And Its Disposal, If Necessary, - Tidying Up And Restoring The Land Adjacent To The Construction Site To Its Original Condition After Completion Of All Works Covered By The Order, - Immediately Notifying The Employer Of Any Threats Or New Circumstances Arising During The Execution Of The Works, - Drawing Up A Safety Plan And Health Protection, - Other Activities Resulting From The Specificity Of Given Works. After Completing The Works, A Geodetic Inventory Should Be Made. A Detailed Description Of The Subject Of The Order Is Included In The Attached Technical Documentation. Note! • The Attached Bills Of Quantities Should Be Treated As An Additional Element, Not Used To Calculate The Offer Price. The Bill Of Quantities Is An Auxiliary And Illustrative Material, It Does Not Constitute An Independent Description Of The Subject Of The Contract And Should Not Be Assigned The Role Of The Functions Referred To In § 4 Section 1 Point 3 Of The Regulation Of The Minister Of Infrastructure Of September 2, 2004 On The Detailed Scope And Form Of Design Documentation, Technical Specifications For The Execution And Acceptance Of Construction Works And The Functional And Utility Program (Journal Of Laws Of 2013, Item 1129, I.E.). • Bills Of Quantities Are Attached To Facilitate The Contractors Valuation Of The Offer. Bills Of Quantities Should Not Be Completed Or Attached To The Offer. Note! If The Design Documentation Or Technical Specification For The Execution And Acceptance Of Construction Works Would Indicate Trademarks, Patents Or Origin In Relation To Certain Materials Or Devices - The Contracting Authority, In Accordance With Art. 99 Sec. 4 Of The Public Procurement Law, Allows Offering Equivalent Materials Or Devices. Materials Or Devices From Specific Manufacturers Define The Minimum Quality Parameters And Functional Characteristics That Must Be Met By Materials Or Devices Offered By The Contractor In Order To Meet The Requirements Set By The Ordering Party. Materials Or Devices From Specific Manufacturers Are Only A Quality Standard Of The Subject Of The Contract. By The Term Minimum Quality Parameters And Functional Characteristics, The Ordering Party Understands The Requirements For Materials Or Devices Contained In Publicly Available Sources, Catalogs, Manufacturers Websites. The Use Of Exemplary Names Of The Manufacturer Is Only Intended To Specify The Level Of Expectations Of The Ordering Party In Relation To A Specific Solution. The Use Of Names Of Manufacturers/Products Is For Illustrative Purposes Only. The Ordering Party, Indicating The Designation Of A Specific Manufacturer (Supplier) Or A Specific Product In The Description Of The Subject Of The Order, At The Same Time Allows Equivalent Products With Quality Parameters And Functional Characteristics At Least At The Level Of The Parameters Of The Indicated Product, Thus Recognizing Each Product With The Indicated Or Better Parameters. In Such A Situation, The Ordering Party Requires The Submission Of Relevant Documents That Authenticate These Materials Or Devices At The Stage Of Evaluation And Examination Of Tenders. This Opinion May Be The Basis For The Ordering Partys Decision To Accept Equivalent Materials Or Devices. 3. The Contractor Is Obliged To Perform The Order On The Terms And Conditions Described In The Contract Template Constituting Appendix No. 4 To The Swz.