Tenders Are Invited For Delivery Of A Assembling Vehicle On A Used Chassis With A Factory New Body And New Equipment

The Subject Of The Contract Is The Delivery Of A Used Truck With A Maximum Permissible Weight Of 26,000 Kg, With A Brand New Superstructure For The Transport Of Municipal Sewage. Cpv Code 34144500-3 - Vehicles For The Transport Of Waste And Sewage Chassis: • Diesel Engine, Capacity Up To 7500 Cm3 • Engine Power From 240 Kw To 260 Kw• Year Of Manufacture 2011 Or Later• Vehicle Mileage: Maximum 150,000 Km• Number Of Axles: 3• 6X2 Chassis• Last Steering Axle• Gvwr 26 Tons• Suspension Front Leaf Spring, Rear Air – Adjustable• Exhaust Emission Standard Minimum Euro 5• Automatic Gearbox• Hydraulic Power Steering• Day Cab – 2 Or 3 Seater, White• Factory Painted Cabin And Vehicle Frame• Pneumatic Drivers Seat• Abs System• Air Conditioning• Differential Lock• Tires Year Of Production 2021 Or Younger- Minimum Size 315/70 R 22.5, Minimum Tread 10 Mm• Side Underrun Guards• Power Take-Off Unit• Tachograph• Warning Light Bar On The Roof Of The Azdu• A Set Of Keys• The Vehicle Is Technically Efficient - Meeting The Requirements Set Out In The Regulations Regulating The Technical Conditions For Vehicles, With A Valid Technical Examination And Oc• Technical Condition - Very Good, The Vehicle With All Components And Mechanisms In Working Order, No Damage To The Windows, Bodywork, Upholstery, Dashboard, Corrosion, Scratches• A Vehicle Registered In Poland As A Septic Tanker• Regulated Legal Status (Not Encumbered With A Pledge, Mortgage, Leasing, Customs Duties, Etc.) Convex, Made Of Steel With A Minimum Thickness Of 6Mm• Minimum Two Partitions (Breakwaters) Inside The Tank• Tank Capacity 18 M3 - Maximum Length 6M, Maximum Diameter 2M• Rear Bottom Opened And Locked Manually• Suction-Force Compressor Capacity Minimum 15,000 L/Min, Driven By A Hydraulic Motor, Located On The Right Side Of The Vehicle Between P 1St And 2Nd Axles • Compressor Equipped With A Four-Way Valve (Suction/Push) • Compressor Protected Against Flooding: Upper Float Valve Located In The Ball Tank And Lower Float Valve Located In Front Of The Compressor • Compressor Switch On The Rear Part Of The Body • Hooks For Hoses On Bottom • Lubricating Oil Catcher • Liquid Level Indicator In The Front Part Of The Tank Made Of Polycarbonate, Calibrated. • Manovacuometer Indicating The Current Pressure In The Tank. With A Slight Slope, Equipped With Drain Valves• Two Suction And Discharge Stubs With Knife Gate Valves, Size Dn 110 - One In The Rear End Of The Barrel, One At The Front Of The Barrel, Behind The Cabin On The Passenger Side• Suction And Drain Stub Dn 60 In Front Of The Barrel On The Drivers Side • One-Person Vehicle Body • Robo Lamp Switch At The Rear Of The Superstructure Switched On From The Vehicles Cab • Orange Strobe Warning Lamps At The Rear Of The Superstructure • 2 Traffic Cones - Warning, With A Storage Place Behind The Rear Lighting Beamordering Requirements:1. The Subject Of The Contract Should Be Adapted To Work And Safe Movement On Public Roads.2. The Subject Of The Contract Also Includes Training Of The Employers Employees In The Use Of Devices And Proper Operation Of The Vehicle On The Day Of Receipt Of The Subject Of The Contract At The Contractor.3. The Contractor Shall Provide A Warranty For The Body And Accessories For A Period Of Not Less Than 6 Months From The Date Of Handing Over The Vehicle To The Employer. Repair Time Up To 14 Working Days.4. At The Tender Selection Stage, Within No More Than 3 Days From The Date Of Opening The Tenders, The Ordering Party Reserves The Right/Possibility To Inspect The Vehicle Before Concluding The Contract, The Test Drive License To Check The Technical Condition Of The Vehicle, For No More Than 8 Hours In The Seat Of The Contractor. Failure To Comply With This Condition Will Result In The Ordering Partys Right To Reject The Offer And Not To Conclude A Contract With This Contractor. In Addition, The Ordering Party Has The Right Not To Conclude A Contract With The Contractor In The Event Of Disclosing Defects In The Vehicle During The Test Drive And Examination, The Cost Of Removing Which Exceeds Pln 2,000. Pln Gross. Place Of Delivery: Ul. Wrocławska 8, 56 500 Syców. The Delivery Should Be Made From 7:00 To 14:00 On The Employers Working Days, I.E. Mon. - Fri The Proof Of The Completion Of The Delivery Will Be A Written Protocol Of Receipt Of The Subject Of The Order. Delivery Of The Vehicle To The Ordering Party: At The Suppliers Expense.