Tenders Are Invited For Implementation Of The Accessible Local Government - Grants And Equalizing Differences Between Regions Iii Programs In The Bieszczady District.

Part 1. Construction Of The Elevator Shaft With The Construction Of An Internal Lift. Execution And Assembly Of A Platform Crane With A Lifting Capacity Of 400 Kg For 4 Floors In The Central Part Of The Building Of The Bieszczady School And Education Center Located At Ul. Witolda Gombrowicza 37, 38-700 Ustrzyki Dolne Consists In Adapting The Structure Of The Above-Mentioned Building By Making: The Foundation In The Form Of C20/25 Concrete Beams, Reinforced With A-Iii(34Gs) And A-0 Steel. Beams And Their Location Are Marked In Fig. No. 5, No. 7 And 8 (Bw-1; Bw-2) Of The Design Documentation. The Pit Slab Is Designed As A Reinforced Concrete Slab Made Of C20/25 Concrete, Reinforced With A-Iii(34Gs) Steel. Plate Thickness - 15 Cm. The Slab And Its Location Are Marked In Fig. No. 8 And No. 5 Of The Design Documentation. Typical Self-Supporting Lift Shaft, Made Of Aluminum Profiles. Shaft Constructions Were Designed As Based On The Pit Plate, Vertical Fastenings Of The Shaft To The Existing Wall And Ceiling According To A Typical Design Provided By The Contractor. 24Cm. Before The Openings Were Cut, Reinforcement Of The Ceiling Was Designed In The Form Of Steel Supporting Beams Supporting The Cut Floor Slabs. Beams Made Of Heb 180 I-Beams Based On Existing Load-Bearing Walls Were Designed. Installation Of A Vertical Lift In An Electrically Driven Shaft. Preparing And Carrying Out The Procedures Necessary To Perform Tests By The Inspector Of The Office Of Technical Inspection. Obtaining A Decision Permitting Operation In Accordance With The Applicable Regulations. The Task Also Provides For Bricking Up Openings In Internal Walls And Making Doors With Dimensions 90/205 And Fire Resistance El60 For Each Floor Of The Building In Accordance With The Design Documentation. The Opz For This Part Includes The Attachments: Attachment Number Attachment Name1 .1 Technical Documentation1.2 Opz For Part I1.3 Contract Template Task Financed Under: 1) Program Accessible Local Government - Grants; 2) Program Of Equalizing Differences Between Regions Iii; 3) Budget Of The Bieszczady District; The Contractor Selected Through A Tender Is Obliged To: 1) Equip And Develop The Construction Site And Back-Up Facilities, 2) Provide Electricity And Supply Of Process And Drinking Water On Its Own, As Well As The Possibility Of Heating Drinks And Meals, 3) Maintain The Construction Site Back-Up Facilities, 4) Restoring The Land To Its Original Condition In Places Not Intended For Investment Works But Occupied During The Works, 5) Drawing Up A Review Report, Which Is To Include: Agreements With Possible Subcontractors And Further Subcontractors, Construction Site Handover Report, Works Acceptance Reports, A Set Of Certificates, Certificates And Technical Approvals For The Built-In Building Materials, Final Acceptance Report, Statement Of The Authorized Works Manager On The Execution Of The Task In Accordance With The Regulations, As-Built Geodetic Inventory And All Necessary Documents To Hand Over The Facility For Use,6) Take Into Account If The Scope Of Tasks And Collisions Occurring In The Remaining Parts Of The Contract Are Not Exceeded In The Performance Of Works, The Contractor Selected Through A Tender Is Obliged To: 7) Not Deteriorate The Condition Of The Building And The Square Next To The Building.