Tenders Are Invited For New Construction Of The Osterfeld School - Toilet Partitions

Manufacture Partition Wall Construction For Toilet Areas According To The Architects Plan, Deliver And Install Ready For Use. The Partition Wall System, Including All Notches, Must Be Measured And Prepared After Completion Of The Tiling Work, Cutting On Site Is Not Permitted, All Edges Must Be Cut At The Factory And Sealed Tightly Before Assembly The System Must Be Tüv Tested And Marked With The Gs Mark. No Materials And Substances Containing Pvc, Formaldehyde Or Asbestos May Be Used. Height: Approx. 2,150 Mm Above The Top Of The Finished Floor Floor Clearance: Approx -Walls, Mw Walls, Gk Wallscolour: From The Standard Manufacturer Color Chart At The Agfront’S Choice: Made Of 13Mm Water-Resistant Hpl Panelsvisible Edges: Milled And Chamferedcover Profile: As A Comprehensive, Angular (No Round Profiles)2-Chamber Aluminum Cover Profile Over The Entire Front Profile Dimensions: Approx. 43Mm X 20Mm Profile Colour: Natural Colour Big Anodisedwall Connections: With Angular Aluminum U-Profilesprofile Dimensions: Approx. 17 X 30 Mmprofile Colour: Natural Anodisedtile Height: Approx Be Made Of The Same Material As The Front, Hammer In Butt And Be Self-Closing.Edges: Must Be Chamfered, All Corners Must Be Rounded Offdoor Stop Profile: Square, Made Of Aluminium, Have A Rubber Seal On The Lock Side To Ensure That The Door Closes Quietly.Profile Dimensions: Approx 21Mm X 17.5Mmprofile Color: Natural Anodisedpartition The Partitions Between The Cabins Must Be Made Of The Same Material As The Front.Visible Edges: Milled And Chamferedfastening: On The On-Site Wall And On The Front With A Square Aluminum U-Profileprofile Dimensions: Approx X 30Mmprofile Colour: Natural Colour Big Anodizedtile Height: Approx. 1.20 Mto Compensate For The Wall Connection Above The Tiling, The Wall Connection Profile Must Be Backed With The Same Tile Thickness Throughout The Entire Remaining Height. Fastening: Invisible On The Floor, Penetration Points Through The On-Site Seal Must Be Tightly Closed Again After Assembly. Height: Approx. 150 Mm Profile Dimensions: At Least 20 Mm Profile Colour: Natural Anodised Fittings Per Door: 3-Roller Stainless Steel Strips, Including A Corrosion-Protected Spring Strip Lock Lock Case: Aluminum With Bolt In Stainless Steel Door Knob Pull Buttons With Bolt Olive, With Red-White Locking As One-Handed Locking, With Emergency Release, Material: Aluminum Accessories An Aluminum Coat Hook And A Door Buffer Are To Be Supplied And Installed For Each Toilet Cubicle, The Attachment Must Be Concealed.