Tenders Are Invited For Delivery Of Building And Road Materials Along With Its Transport To The Place Indicated By The Employer In 2023.

Delivery Of Building And Road Materials With Their Transport To The Place Indicated By The Employer In 2023, In The Scope Of: Task No. 1: Delivery And Transport To The Place Indicated By The Employer Of Materials: 1. Concrete Paving Stones, Dimensions: 8Cmx10cmx20 Cm, Gray Color, Approx. 400 M2 2. Rinsed Concrete Paving Stones, 8 Cm Thick, Approx. 50 M2 3. Concrete Paving Stones, Dimensions: 8Cmx10cmx20 Cm, Graphite/Red Color, Approx. 50 M2 4. Concrete Paving Stones, Dimensions: 6Cmx10cmx20 Cm, Gray Color, Approx. 50 M2 5. Washed Concrete Paving Stones, 6 Cm Thick, Approx. 100 R.M. 7. Concrete Retaining Plates, Dimensions: 12Cmx25cmx100cm, Grey, Approx. 400 M. 8. Concrete Edges, Dimensions: 6Cmx30cmx100cm, Grey, Approx. 100 M. 8Cmx40cmx60cm, In The Amount Of Approx. 100 Pcs. • The Subject Of The Order Consists Of The Purchase Of The Above-Mentioned Material And Its Transport To The Place Indicated By The Ordering Party. Data About The Task. The Ordering Party Reserves The Right Not To Complete The Entire Order As Well As To Increase Its Scope, However, In Accordance With Art. 433 Sec. 4) Of The Public Procurement Law Act, The Ordering Party Indicates The Minimum Values ​​Or Amounts Of The Parties Performance For: Task No. 1: Delivery And Transport To The Place Indicated By The Ordering Party Of Materials: 1. Concrete Cobblestones With Dimensions Of 8Cmx10cmx20 Cm, Gray Color - Minimum 300 M2. 2. Rinsed Concrete Paving Stones, 8 Cm Thick - Minimum 10 M2.3. Concrete Cobblestones With Dimensions Of 8Cmx10cmx20 Cm, Graphite/Red Color - Minimum 10 M2.4. Concrete Cobblestones With Dimensions Of 6Cmx10cmx20 Cm, Gray Color - Minimum 10 M2.5. Rinsed Concrete Paving Stones, 6 Cm Thick - Minimum 10 M2.6. Concrete Curbs For Drive-In/Entrance Roads, Dimensions 15Cmx22cmx100cm, Gray Color - Minimum 50 M.7. Concrete Resistors With Dimensions Of 12Cmx25cmx100cm, Gray Color - Minimum 200 M.8. Concrete Edging With Dimensions Of 6Cmx30cmx100cm, Gray Color - Minimum 50 M.9. Openwork Slabs With Dimensions Of 8Cmx40cmx60cm - Minimum 50 Pcs. • The Contractor Undertakes To Deliver The Subject Of The Order In Partial Deliveries For A Given Task, With His Own Means Of Transport, Successively According To The Employers Needs, To The Place Indicated By The Employer In The Tuchomie Commune. The Ordering Party Plans To Order Deliveries In Such Quantities As To Constitute A Full Load Of The Contractors Vehicle. • The Contractor Undertakes To Perform The Above-Mentioned Subject Of The Agreement Within The Offered Time After Each Receipt Of A Written Or Oral Order Issued By The Head Of The Tuchomie Commune Or An Authorized Person. • The Contractor Is Obliged To Deliver The Subject Of The Order With Its Own Transport. Transportation Of Materials Is To Include Driving A Car From The Place Of Loading To The Place Of Unloading And Returning, As Well As Loading And Unloading. • The Ordering Party Shall Each Time Specify The Place Of Delivery And The Quantity Of The Material In The Notification. • For The Performance Of The Subject Of The Contract, The Ordering Party Shall Pay The Contractor Remuneration According To The Unit Prices Specified In The Offer And The Number Of Deliveries Actually Made On The Basis Of The Delivery Notes Confirmed By The Ordering Party. • The Price Shall Include The Cost Of Materials And Their Transport. • Settlement Will Be Based On Actually Performed Deliveries. • The Ordering Party Allows Partial Payment After Each Partial Delivery For A Given Task. • The Contractor Is Entitled To Issue An Invoice For A Given Partial Delivery For A Given Task, Confirmed By The Ordering Party. • The Contractors Remuneration Shall Be Payable Within 30 Days After Issuing A Vat Invoice By The Contractor. Tasks No. 1, 2, The Materials To Be Delivered Are To Have Valid Certificates Or Declarations Of Compliance With Applicable Standards, Are To Be Brand New, First-Class Quality, Free From Manufacturing Defects, Having Appropriate Approvals, Declarations Of Conformity, And All Synchronized Standards In Force In The Eu. • The Cars Are To Have An Appropriate Drive To Ensure Efficient Operation In Difficult Terrain - Due To The Low Load-Bearing Capacity Of Dirt Roads - If Such A Place Is Indicated By The Employer. • The Risk Of Performing The Services Covered By The Contract Resulting From The Lack Of Insurance Of The Contractors Cars Is Borne By The Contractor. • The Cost Of Removing Damage Caused To The Third Party During The Performance Of The Delivery In Question Is Borne By The Contractor. • In The Event Of A Car Breakdown, A Replacement Car Must Be Provided. If References To Standards, European Technical Assessments, Approvals, Technical Specifications And Technical Reference Systems Are Used In The Subject Of The Contract, The Employer Allows Solutions Equivalent To Those Described. When Analyzing The Documentation Of The Procedure, The Contractor Should Assume That Each Reference Used In The Documentation Is Accompanied By The Word Or Equivalent. If The Description Of The Subject Of The Contract Contains Trademarks, Patents Or The Origin Of Products/Source/Specific Process That Could Characterize The Products Or Services Provided By Of A Specific Contractor, This Means That They Are Given As Examples And Specify Only The Minimum Expected Quality Parameters And The Required Standard.The Contractor May Use Materials Or Devices Equivalent, But With Similar Or Better Technical And Quality Parameters, The Use Of Which Will Not Adversely Affect The Proper Functioning In Any Way Solutions Adopted In The Design Documentation. The Contractor Who Uses Equivalent Devices Or Materials Will Be Obliged To Demonstrate During The Execution Of The Contract That The Devices And Materials Used By Him Meet The Requirements Specified By The Employer. Joke. 101 Sec. 4 Of The Public Procurement Law, The Contractor Using Equivalent Materials Undertakes To Use Materials With Parameters Not Worse Than Those Specified In The Tender Documentation. Similar Properties, Functionally Suitable For The Required Application. The Contracting Authority May Not Reject A Tender Only Because The Offered Supplies Do Not Comply With The Standards, Technical Assessments, Technical Specifications And Technical Reference Systems To Which The Description Of The Subject Of The Contract Refers, Provided That The Contractor Proves In The Tender That The Proposed Solutions Are Equivalently Meet The Requirements Specified In The Description Of The Subject Of The Contract. The Contractor Who Refers To Equivalent Solutions Is Obliged To Prove That The Solution He Offers Meets The Requirements Specified By The Employer. In Such A Case, The Contractor Shall Attach To The Offer A List Of Equivalent Solutions Together With Its Description Or Standards (If Applicable). The Use Of A Label In The Documentation Describing The Subject Of The Contract Means That The Employer Accepts All Labels Confirming That The Given Works, Supplies Or Services Meet Equivalent Requirements Specified By Contracting Label. If The Economic Operator, For Reasons Beyond Its Control, Cannot Obtain The Label Or Equivalent Label Specified By The Contracting Authority, The Contracting Authority, Within The Time Limit Set By It, Accepts Other Relevant Evidence, In Particular The Manufacturers Technical Documentation, Provided That The Given Economic Operator Proves That The Construction Works , Deliveries Or Services To Be Performed By Him Meet The Requirements Of A Specific Label Or Specific Requirements Indicated By The Ordering Party (If Applicable). The Use In The Documentation Describing The Subject Of The Contract Of The Requirement To Hold A Certificate Issued By A Conformity Assessment Body Or A Test Report Carried Out By That Body As A Means Of Evidence Confirming Compliance With The Requirements Or Characteristics Specified In The Description Of The Subject Of The Contract, Tender Evaluation Criteria Or Contract Performance Conditions Means That The Contracting Authority Also Accepts Certificates Issued By Other Equivalent Conformity Assessment Bodies. The Employer Also Accepts Other Appropriate Means Of Proof, In Particular The Manufacturers Technical Documentation, In The Event That A Given Contractor Has Neither Access To Certificates Or Test Reports Nor The Possibility Of Obtaining Them In A Timely Manner, Unless This Lack Of Access Cannot Be Attributed To A Given Contractor , And Provided That The Given Contractor Proves That The Construction Works, Supplies Or Services Performed By Him Meet The Requirements Or Criteria Set Out In The Description Of The Subject Of The Contract, Tender Evaluation Criteria Or Requirements Related To The Performance Of The Contract (If Applicable). If The Description Of The Subject Of The Contract Includes An Entry Resulting From The Knr Or Knnr Indicating The Need To Use Specific Equipment With Specific Parameters During The Execution Of The Order, The Employer Allows The Use Of Other Equipment, Provided That It Ensures The Achievement Of The Assumed Design Parameters And Does Not Cause The Risk Of Non-Compliance Of The Performed Works With The Technical Documentation (If Applicable The Description Of The Subject Of The Contract Contains The Requirements Resulting From Art. 100 Of The Public Procurement Law. All The Elements Used Are To Be Brand New, Approved For Trade And Have All Certificates Of Admission To Use. In Addition, The Elements Used Should Meet The Safety Standards Set By Law.