The Subject Of The Contract Is The Comprehensive Performance Of The Task Entitled Construction Of Street Lighting At M.J. Pi sudskiego And Kochanowski In Ka czuga - In The Design And Build Formula As Part Of The Investment Task: Construction And Expansion Of Street Lighting In The City And Commune Of Ka czuga The Scope Of The Contract Includes All Necessary Design And Construction Works That Will Enable The Proper Functioning Of The Facility And The Resulting Accompanying Infrastructure In Accordance With Applicable Law. In Accordance With All The Requirements Set Out In The Functional-Utility Program (Hereinafter Fup) And Resulting From Applicable Law, Within The Accepted Bid Amount, The Following Should Be Designed And Implemented: - All Necessary Design Studies Enabling The Implementation Of The Subject Of The Agreement In Accordance With The Employers Requirements And The Agreement. As Part Of The Design Work, The Contractor Is Obliged To Obtain, On Behalf Of And For The Benefit Of The Employer, Opinions, Technical Conditions, All Arrangements, Permits, Permits, Decisions And Consents Necessary To Start Construction Works. Design Works Should Be Carried Out On The Basis Of Fup And Relevant Legal Provisions. - All Necessary Construction Works Based On The Design Documentation Developed By The Contractor And Approved By The Employer, Pfu, Stwiorb And The Relevant Legal Provisions And Obtain, On Behalf And For The Benefit Of The Employer, Decisions On The Occupancy Permit Or Other Documents Enabling The Employer To Start Using The Buildings In Accordance With With The Construction Law Act. The Detailed Scope Of Work Has Been Included In The Functional-Utility Program With Attachments To The Above Document. The Functional-Utility Program Is A Description Of The Subject Of The Contract In Accordance With The Regulation Of The Minister Of Development And Technology Of December 20, 2021 On The Detailed Scope And Form Of Documentation Design, Technical Specifications For The Execution And Acceptance Of Construction Works And The Functional And Utility Program. Characteristic Parameters Determining The Size Of The Order: As Part Of The Task, Cable Street Lighting Should Be Built, Consisting Of: - Underground Cable Street Lighting Line With A Yakxs 4X25mm2 Cable With A Total Length Of All Circuits Of About 400M, - 12 Sets. Lighting Poles With Luminaires In Led Technology With A Luminaire Suspension Height Of Up To 9M, - A Lighting Control Box With The Necessary Equipment To Control And Protect The Lighting Circuits; The Connection Conditions Obtained By The Contractor From The Power Grid Operator Pge Dystrybucja S.A. Area Of Jaros aw The Area Of The Planned Investment Is Located In The Right-Of-Way Of M. J. Pi sudskiego And Kochanowskiego Streets In Ka czuga, Precinct 5. The Investment Is Located In An Area Not Covered By The Local Spatial Development Plan For The City And Commune Of Ka czuga. Period Of Quality Guarantee And Warranty For Construction Works Defects: Minimum 60 Months Contractor Is Responsible For The Execution Of The Subject Of The Contract In Accordance With The Principles Of Technical Knowledge, Applicable Standards And Regulations, Instructions Of The Investors Supervision And The Employer, Moreover: Or Amendments. The Data Specified In The Fup Will Be Considered As Base Values From Which Deviations Are Allowed Within The Specified Tolerance Range, 2) The Fup Is The Starting Material For The Contractor To Prepare Studies, Perform The Task, 3) The Employer Reserves The Right To Participate In The Process Of Creating Technical Documentation At Each Stage Of Its Development. The Contractor Is Obliged To Consult With The Employer In Order To Obtain Approval Of The Solutions Used, The Selection Of Materials And Devices In Specific Parts Of The Project And The Related Costs, 4) The Design Solutions Will Use Products (Materials And Devices) Approved For General Use. Construction Products Used During Construction Works Must Meet The Requirements Of Polish Regulations, And The Contractor Will Have Documents Confirming That They Have Been Placed On The Market In Accordance With The Provisions Of The Construction Products Act And Have The Required Declarations Of Conformity.5) The Technical Documentation Should Specify Technical Parameters And Requirements For The Products Used,6) The Employer Allows Changes To The Presented Documentation, Subject To The Acceptance Of The Necessary Arrangements With Interested Parties,7) The Technical Documentation Should Be Prepared To The Extent (And Quantity) Necessary To Obtain The Necessary Administrative Decisions Enabling The Implementation Of Construction Works,8) In Addition To The Documentation In Paper Version, It Is Required To Submit The Entire Study To The Ordering Party In An Electronic Version On An External Medium,9) The Contractor Shall Bear All Costs, Among Others Fees For Arrangements, Decisions, Issuing Opinions On Documentation By Competent Authorities Or Institutions And Obtaining Technical Data, 10) The Contractor Is Obliged, As Part Of The Contractual Remuneration, To Perform Authors Supervision. 11) The Contractor Undertakes To Perform The Subject Of The Contract In Accordance With The Functional And Utility Program, Principles Of Technical Knowledge And Construction Art, Applicable Regulations And Polish Standards, And To Hand Over The Subject Of The Contract On Time.
