Tenders Are Invited For Checking And Testing Apparatus

Checking And Testing Apparatus. 1. The Subject Of The Order Is The Delivery Of A Pyrolysis Furnace - 1 Pc. 2. A Detailed Description Of The Subject Of The Order Is Contained In Appendix No. 1 To The Tor. No. Minimum Required Parameters 1.0 A Furnace Enabling Pyrolysis Of Biomass - Biochar Production 1.1 The Oven Has An Automatic Control Of The Pyrolysis Process. 1.2 The Furnace Contains A Gas-Tight Retort For Carrying Out The Pyrolysis Process. 1.3 Retort Made Of Heat-Resistant Steel, Grade 1.4841. 1.4 Heating Element Material - Kanthal. 1.5 The Furnace Contains Type K Thermocouples. Control Thermocouple - Regulation Based On Measurement From The Retort. 1.6 Maximum Furnace Temperature Not Less Than 800 ºc. 1.7 The Furnace Is Protected Against Exceeding The Maximum Temperature. 1.8 Continuous Working Temperature Not Less Than 700 ºc. 1.9 The Furnace Is Capable Of Operating In A Vacuum Or Carrying Out The Pyrolysis Process Under Conditions Of Inert Gas Flow, Eg Nitrogen. 1.10 The Furnace Includes A Connection Port For A Minimum Of Three Process Gases. 1.11 The Furnace Includes A Connection To The Vacuum Pump. 1.12 The Furnace Allows You To Work With The Vacuum Pump On Or Off. Possibility To Change The Operating Mode During The Process. 1.13 Work With The Vacuum Pump Switched On To A Temperature Not Lower Than 700 ºc. 1.14 The Size Of The Furnace Chamber Enables The Pyrolysis Of Biomass With A Volume Of Not Less Than 1.5 Dm3. 1.15 Volume Of The Process Chamber Not Less Than 10 Dm3. 1.16 Possibility Of Flue Gas Discharge Both Through The Chimney And The Vacuum Pump System With A Filter System. 1.17 The Furnace Has A Cooling System Operating In A Closed System, Used To Cool The Furnace Components Water/Air Heat Exchanger. 1.18 The Furnace Allows The Collection Of Pyrolysis Condensates. 1.19 Tank For Pyrolysis Condensates Equipped With A Drain Valve For Draining Condensates. 1.20 The Furnace Includes An Additional Control And Measurement System For Measuring The Temperature Inside The Retort. 1.21 Pid Process Control Method. 1.22 Mass Flow Controller Incorporated Into The Gas Supply System And Operator Panel. 1.23 The Furnace Contains A Minimum Of 4 Biomass Containers, Adapted To The Shape And Dimensions Of The Retort. 1.24 Volume Of Biomass Containers Not Less Than 0.5 Dm3. 1.25 The Furnace Includes A Touchscreen Operator Panel With An Intuitive Graphical Interface For Setting And Controlling The Pyrolysis Process. 1.26 The Stove Is Equipped With A Hood That Is Part Of The Exhaust System, To Be Mounted Above The Device. 1.27 Communication Of The Stove With The Control Device Via Rj45 (Lan) And Via Wireless Transmission (Wifi) 1.28 Furnace Manual In Polish Or English. 2.0 Oven Software 2.1. Data Archiving, Report Printing, Data Visualization, Graphical Visualization Of The Temperature Profile. 2.2 Allowing To Record The Course Of The Given Heating Process. 2.3 For Pressure/Vacuum Control. 2.4 Providing Automatic Control With The Possibility Of Programming A Multi-Stage Heating/Cooling Curve. 2.5 Allowing You To Set The Temperature, Time To Reach The Set Temperature And Time To Soak In The Set Temperature. 2.6 Allowing The Introduction Of Shielding Gas At A Selected Stage Of The Heating Curve. 2.7 Giving The Possibility Of Starting The Pump At The Selected Stage Of The Heating Curve. 2.8. The Number Of Segments Of The Temperature Program Not Lower Than 10. 2.9 Ability To Program At Least 10 Temperature Programs. 2.10 Software Manual In Polish Or English. 3.0 Vacuum Pump With Filter Cartridges 3.1 With A Final Pressure Of At Least 102 Mbar. Due To The Lack Of Technical Possibilities, The Further Part Of The Description Of The Subject Of The Contract Can Be Found In Point Ii.2.14 Additional Information