Tenders are invited for Delivery Of A Brand New Sanitation Vehicle For Collecting Liquid Waste From Septic Tanks And Household Wastewater Treatment Plants With A Gvw Of Up To 18,000 Kg

Sewerage Vehicle For Collecting Liquid Waste From Septic Tanks And Household Sewage Treatment Plants With A Dmc Up To 18,000 Kg. Chassis And Bodywork Manufactured And Completed Not Earlier Than June 1, 2022. Brand New Vehicle. Certificate Of Approval For The Complete Vehicle Valid On The Day Of Submitting The Offer Or Documents Admitting The Vehicle To Road Traffic In Poland And Vehicle Registration. 1. The Chassis Must Come From Serial Production, Delivery Of Prototypes Or The First Devices From A Given Series Is Not Allowed,2. A Diesel Engine With A Power Of Not Less Than 260 Hp And A Minimum Torque Of 1000 Nm, Meeting The Requirements Of The Euro 6 Standard With The Use Of Scr Technology, In Particular In Terms Of Energy Consumption And Co2, Nitrogen Oxide, Hydrocarbon And Particulate Emissions.3. Automatic Gearbox, Equipped With A System Of Automatic And Manual Gear Changes Or Manual, 6-Speed4. Wheelbase In The Range From 3700Mm To 3800Mm,5. Suspension: - Two-Axle - Front Pneumatic Or Mechanical Suspension - Rear Pneumatic Or Mechanical Suspension - Rear Axle Differential Lock,6. Power Take-Off From The Engine, Meeting The Requirements Of The Vehicle Body,7. Braking System: - Front And Rear Disc Brakes, - Braking System With Abs System, - Asr, Esp System, 8. 22.5 X 9.00 Inch Wheels With Tire Size - Front Axle Tires - 315/80/22.5 - Rear Drive Axle Tires - 315/80/22.59. Cabin: - Two Or Three-Seater Day Cabin, - Air-Conditioned Cabin, - Drivers Seat With Air Suspension, - Heated And Electric Adjustable Mirrors, - Electric Windows, - Radio With Loudspeakers, - Digital Tachograph Legalized After Handing Over The Vehicle To The Contractor And At His Expense ( Instruction In Polish) - On-Board Computer, Messages Displayed In Polish, - Lockable Fuel Tank, - Remotely Controlled Central Locking, - Rubber Mats In The Cabin, - Cruise Control - Acoustic, Warning Signal For Reversing With A Safety Switch, Ii. Vehicle Body1. Tank - Tank With A Capacity Of Min. 10 M3 Inclined Towards The Rear Of The Vehicle, Two-Chamber: 1 Chamber Min. 1 M3 For Clean Water, 2 Chamber Min. 9 M3 For Sludge, - Made Of Steel Sheet With A Thickness Of Min. 6 Mm, Of Increased Strength, Cylindrical, Flexibly Fixed To The Intermediate Frame, Closed With Convex Ends, - Color Ral 5010 - Tubular Liquid Level Gauge Made Of Polycarbonate, Protected Against Damage And Can Be Cleaned Without Dismantling, - Sludge Discharge Trough Under The Bottom Made Of Stainless Steel, - Equipped With Baffles Preventing The Liquid From Waving Perpendicularly To The Direction Of Vehicle Movement, In A Number Not Less Than That Specified In The Currently Applicable Regulations, - Side Gutters Lined With Aluminum Sheet, Fixed On Both Sides Of The Tank, - Mechanically Opened Rear End2. Suction And Discharge System - A Vane Compressor With A Capacity Of Min. 10200 L/Min, - Hydraulic Drive Of The Compressor, - Compressor Working Time Counter, - Automatic Compressor Switch-Off When The Tank Is Full, - System Of Shut-Off Valves, Protecting The Suction Pump Against Flooding, - Additional Valve Between The Body And The Compressor, Protecting The Compressor Against Flooding In During The Journey With A Full Tank - Pneumatically Controlled, - Four-Way Valve Regulating The Course Of The Intake Air Stream, Enabling Pressure Emptying Of The Tank, - Suction And Drain Connections Located On The Rear Bottom, - Additional Suction And Drain Connections (Dn 110) Located At The Front Of The Tank On The Right Side , Manually Controlled And Equipped With A Venting Valve - Vacuum Gauge - Set Of Suction Hoses (Dn 110) With A Length Of Min. 20 M Ended With A Basket3. Additional Equipment - A Water Pump Connected To A Clean Water Tank, With A Capacity Of Min. 20 L/Min And Pressure Min. 120 Bar, Equipped With A High-Pressure Hose Terminated With A Washing Lance, With Automatic Retraction, Min. 15 Meters - A Container For Water And Soap - A Lockable Box For Tools Made Of Corrosion-Resistant Materials - A Warning Lamp At The Rear Of The Vehicle And Illuminating The Workplace Made In Led Technology, - A Beam With Warning Lights, The Illuminated Name Of The Customer Placed On The Roof Of The Cabin - A Full-Size Spare Wheel With Tire Size 315/80/22.5 - Warning Triangle, - First Aid Kit, - Fire Extinguisher, - 20 Ton Hydraulic Jack, - Wheel Wrench, - Complete Set Of Tools, - Tire Pumping Hose, - Wheel Chocks (Min 2 Pcs) - Daytime Running Lights, - Body Made In Accordance With Eu Law And Having The Ce Mark, - Instruction Manual And Spare Parts Catalog In Polish, - Homologation For A Complete Vehicle Or Individual Approval, - Connection Of The Gps Module Provided By The Ordering Party: The Ordering Party Reserves The Right Has The Right To Install The Gps Installation By The Contractor With Whom It Is Bound By The Contract, Without Losing The Warranty, To Which The Contractor Agrees. Iii. The Vehicle Should Meet The Requirements In Accordance With The Regulation Of The Minister Of Infrastructure Of November 12, 2002 On The Requirements For Sanitation Vehicles, I.E. 1. Vacuuming Vehicles Should Be Additionally Equipped With: 1) A Float Control Valve Located At The Highest Point Of The Tank To Prevent The Flow Of Impurities From The Tank To The Suction System, 2) A Sedimentation Tank To Prevent Flooding Of The Vacuum Pump, 3) A Four-Way Valve, Which Can Be One The Whole With A Sedimentation Tank, By Means Of Which Air Is Sucked Or Pumped Into The Tank, 4) A Safety Valve Protecting Against Excessive Pressure Increase In The Tank, 5) A Non-Return Valve Placed In The Suction And Forcing System To Secure The Outflow Of Air From The Tank When The Pump Vacuum Will Be Turned Off, 6) Lower Suction Valve, By Means Of Which The Tank Is Emptied, Terminated With A Connector For Attaching The Hose, 7) A Set Of Suction Hoses, Of Which At Least One Has A Suction Strainer, 8) A Manovacuometer, 9) A Liquid Indicator With A Scale For To Determine The Amount Of Collected Sewage,10) A Set Of Flexible Hoses With Connectors,11) Z Tank.2. The Tank In Septic Tankers With A Capacity Of More Than 6,000 L Should Be Equipped With Baffles To Prevent Liquid Ripples Perpendicular To The Direction Of Movement Of Liquor Vehicles, In A Number Not Less Than That Specified In The Annex To The Regulation,3. Each Of The Partitions Referred To In Sec. 2, Should Be Equal To At Least 2/3 Of The Cross-Sectional Area Of ​​The Tank,4. Sewerage Vehicles Should Be Equipped With A Tight Installation, A Tight Tank And An Efficient Control System For The Tank Filling And Emptying System,5. Places Where Sewage Leakage May Occur Should Be Additionally Secured With A Gutter Draining The Leakage To An Additional Tank. The Warranty For The Chassis Is Not Less Than 26 Months. The Warranty For The Body Is Not Less Than 24 Months.