Tenders are invited for Delivery And Assembly Of The Internal Stair Platform In The Building Of The District Office In Jelenia Góra

1. The Subject Of The Contract Is The Delivery, Assembly And Commissioning Of The Internal Stair Platform In The Building Of The District Office In Jelenia Góra At Ul. Jana Kochanowskiego 10, 58-500 Jelenia Góra, Along With Instructions, Ongoing Maintenance For A Period Of 12 Months And A Minimum Warranty Of 24 Months.2. The Order Is Funded By The European Union Under The Operational Program Knowledge Education Development 2014-2020, Co-Financed By The European Social Fund, Priority Axis Ii - Effective Public Policies For The Labor Market, Economy And Education, Measure 2.18 - High-Quality Administrative Services, In Connection With With The Implementation By The Karkonosze County Of The Grant Project Entitled Increasing The Availability Of Public Services In The Karkonosze District As Part Of A Grant Project For Local Government Units Entitled Accessible Local Government - Grants Implemented By The State Fund For Rehabilitation Of The Disabled.3. Detailed Description Of The Subject Of The Order: Part I: Technical Parameters Of The Stair Platform: Location Of The Stair Platform: Ground Floor Of The Building Of The District Office In Jelenia Góra At Ul. Jana Kochanowskiego 10, 58-500 Jelenia Góra, With The Range Covering The First And Second Floor Of The Building. The Platform Should Have All The Approvals Required By Law For Use In Public Utility Facilities. Technical Characteristics Of The Stair Platform: Type Of Drive And Type Of Device: - Stair Platform With Electric Drive, On A Curvilinear Rail, Turning Radius Up To 1800 Degrees Due To The Staircase Structure, Used To Transport Disabled People In Wheelchairs. Control: Push-Button, Remote Control On A Spiral Cable Connected To The Platform As An Option At No Extra Charge - Joystick Or Buttons. The Device Has Access Control In The Form Of A Key Switch + Key. It Is Required To Keep The Button Pressed While Driving. Load Capacity: - Minimum 225 Kg Speed: - Maximum 0.15 M/S Number Of Stops: -- 3 (Start, Intermediate On The First Floor And Destination On The Second Or Ground Floor, Depending On The Starting Point). Type And Length Of The Track: - A Track Made Of Stainless Steel, Mounted On Self-Supporting Posts Or Brackets To The Walls Made Of Stainless Steel On The Inside Of The Staircase, A Curved Track With A Horizontal Rail Section. The Total Length Of The Track - Approx. 22 M (The Current Length Of The Railing ~ 18 M). Platform Inclination Angle: - Selected To Transport Disabled People In Wheelchairs In Accordance With Applicable Regulations. Platform: - With An Internal Dimension Of At Least 750 Mm X 850 Mm, Dimensions Of The Platform Must Meet The Requirements Of The Regulations For Disabled People And The Platform Must Fit In The Staircase, - Platform And Casings In Ral7035 Or Ral 9007 (Or Standard Color), - Platform Finished With Anti-Slip Material, - Auxiliary Elements Such As Handrails To Facilitate Entry And Exit Platforms, - Flat Access Ramps On The Edges Of The Platform, Facilitating The Entry Of The Trolley And Preventing The Trolley From Rolling Off While Driving, - Two Barriers Preventing The Trolley From Rolling Off The Platform, - Emergency Stop - Stop Button, Alarm Sound Signal, - Active Floor - Anti-Crushing System + Anti-Cutting System, - Folding/Unfolding The Platform - Manual, - Method Of Approaching The Platform Ę - Straight Ahead (Along The Track) - The Platform Is Equipped With A Diagnostic Display, Overload Sensor, Speed Limiter. Power Supply: 1-Phase, 230V Acu. Note: The Usable Width Of The Stairs And Landings After The Assembly Of The Staircase Platform (At Rest) Cannot Be Less Than 1.03 M. The Current Minimum Width Of The Staircase Is 1.28 M. Note: The Place Of The Power Connection Will Be Made By The Employer At His Own Expense, After Prior Agreement With The Contractor. Note: The Contractor Will Carry Out The Necessary Measurement Works In The Facility In Order To Design The Stair Platform In Agreement And Approval Of The Principal. Standard Equipment: - Wireless, Surface-Mounted Call Cassettes - 3 Pcs., - Protection Of The Platform And Cassettes Against The Use Of The Device By Unauthorized Persons. Part Iii Information And Requirements Regarding The Platform: 1) The Ordering Party Requires That The Delivered Device Is Brand New, Unused, Undamaged, Complete, Meets The Standards Required By Law, Complies With The Machinery Directive 2006/42/Ec (Machines), Low Voltage Directive 2006/95/ Ec, Electromagnetic Compatibility 2004/108/Ec And Had At Least The Parameters And Features Specified Above In Part I Of The Description. 2) All Materials Used And Purchased Devices Must Have All Necessary Approvals And Certificates In Connection With Their Use In A Public Utility Facility. They Should Also Meet The Necessary Fire Protection Requirements. 3) The Employer Requires The Contractor To Provide A Quality Guarantee And Warranty For The Delivered And Installed Device For A Period Of Not Less Than 24 Months From The Date Of The Certified Faultless Acceptance Of The Subject Of The Contract, And During The First 12 Months To Conduct Ongoing Maintenance Of Platforms And Performed All Inspections Required By Law.4) As Part Of The Subject Of The Contract, The Contractor Is Obliged To: - Deliver The Device To The Place Of Delivery And Assembly; - Start-Up Of The Device; - Preparation Of Platform Documentation For The Purposes Of Notification To The Office Of Technical Inspection (Udt); - Participation In The Acceptance Of Devices By Udt; - Certification Of The Platform, Receipt Of Registration And Admission To Use Ia By Udt. The Costs Related To Certification By Udt, Registration Documentation And Revision Book Shall Be Borne By The Contractor As Part Of The Performance Of The Subject Of The Contract. All Necessary Powers Of Attorney And Authorizations Are Granted By The Ordering Party; - Instruction For Designated Employees Of The Ordering Party On The Operation And Operation Of The Installed And Launched Device. Of The Subject Of The Order And The Ordering Partys Instructions. - The Consequences Of Any Error Caused By The Contractor Will Be Corrected By The Contractor At His Own Expense. Of The Ordering Party Shall Be Performed No Later Than At The Time Specified By The Ordering Party, After Their Receipt By The Contractor, Under Pain Of Stopping The Assembly Works. The Financial Consequences Of This Shall Be Borne By The Contractor. - The Consequences Of Defects And Failures, If They Occurred As A Result Of The Works Performed, Will Be Removed By The Contractor Immediately And At His Expense. 5) The Basic Document Of The Final Acceptance Is The Final Acceptance Protocol, To Which The Contractor Should The Following Documents For The Installed Platform: A) Ec Type Examination Certificate And Declaration Of Conformity According To The Machinery Directive 2006/42/Ec And Certificates Of Conformity, B) Warranty Cards Of The Installed Devices And Other Required By Applicable Regulations, Not Listed Above, C) Instructions For Use Of The Device In Polish, D) Technical As-Built Design With All Necessary And Required By Law Arrangements And Tests, As Well As Technical And Operational Documentation Of The Installed Device, E) Technical Specification With Attestations, F) Electrical Report Of The Device (Platforms With Measurements), G) Construction Report ,H) Report On The Acceptance And Admission Of Devices By Udt.6) If, According To The Ordering Party, The Order Is Not Ready For Final Acceptance, The Ordering Party May Set A New Date For Final Acceptance, Supplementary Correction Works Should Be Performed On A New Date Set By The Ordering Party, But Not Later Than The Date Indicated In The Contract .7) The Contractor Shall Provide Warranty Services During The Period Indicated In The Offer, A Minimum Of 24 Months From The Date Of Final Acceptance Of The Order. Note: The Warranty Period Is One Of The Scoring Criteria For The Evaluation Of Tenders, Hence The Contractor May Extend The Offered Warranty Period - On The Terms Set Out In Section Xxvi Of The Order Terms And Conditions. In Such A Situation, The Warranty Period For Defects Will Be Automatically Extended By The Extended Warranty Period. The Maximum Offered Guarantee Period, Which Will Be Assessed By The Ordering Party As Part Of One Of The Tender Evaluation Criteria, Is 60 Months. If The Contractor Offers A Warranty Period Longer Than 60 Months, The Ordering Party Will Award The Tender The Number Of Points For The Maximum 60-Month Warranty Period Specified In This Criterion. The Stair Platform That Has Been Put Into Use, Maintaining It In A Technically Efficient Condition, Performing Periodic Inspections And Repairs As Required, Removing Failures During The Operation Of The Platform.4. The Subject Of The Contract Should Be Performed In Accordance With Applicable Regulations, Standards And Technical Conditions, In A Manner That Does Not Infringe The Interests Of Third Parties.5. The Subject Of The Contract Will Be Accessible To People With Disabilities In Accordance With Art. 100 Sec. 1 Of The Public Procurement Law. The Subject Of The Contract Does Not Introduce Architectural Barriers For People With Disabilities, Including Wheelchair Users - The Subject Of The Contract Is The Delivery And Assembly Of A Stair Platform For People With Disabilities. (Detailed Description Of The Subject Of The Contract - Section Vi Swz)