Tenders Are Invited For Supply And Delivery Of Front End Loader

Supply And Delivery Of Front End Loader - Manitoba Reference Number: Mb-Mbpb-12S-01411Issuing Department: Procurement And Supply Chaindate Issued: 23/12/2022Issued By: Gom Psctelephone: 204 945-6361Note:For Information Or Item Clarification, If Required, Contact:[email protected] Destination, Freight Prepaid To:Environment, Climate And Parksst. Malo Provincial Parkst. Malo Mb R0a 1T0bidder Must Indicate If You Are Able To Meet The Requesteddelivery Date Of January 19, 2023 Yes ____ Or No ____If No, Then Indicate A Realistic Delivery As Follows:Delivery In ___ Working Days Or ____Weeks From Receipt Of The Order.This Procurement Is Subject To Canadian Free Trade Agreement.General Terms &Amp; Conditions:Bidders Must "Login" To Merx To Access The General Terms &Amp; Conditionswhich Apply To This Rfq, In Addition To Those Shown Below. After"Login" Follow The Links: Information -≫ Government Publications -≫Manitoba Terms And Conditions -≫ Request For Quotation.Submission Terms And Conditions:The Bid Must Be Signed By A Representative Of The Bidder With Theauthority To Bind The Bidder. The Name And Title Of The Representativesigning The Bid Should Also Be Printed Below Their Signature.Bids Must Be Received At The Submission Address No Later Than Theclosing Date And Time.Vendor's E-Mail Address: (If Available) ____________________Quantity Clarification: Quantity Listed Contains 2 Or 3 Decimals._________________________________________________________________________Item Qty Description Deliveryno. Date========================================================Item 10 19/01/20231.00 Each Gsin: N2400material: 99402060Tractor,Loader And Parts As Described Below:One - 71 Horsepower Diesel 4Wd Tractor With Front End Loader, Rear Boxscraper, Rear Snow Blower And Pallet Forks.Engine:-Diesel-Epa Rating Interim Tier Iv Emission-Liquid Cooled-4 Cycles-Turbo Aspiration-4 Cylinders In Line-Bore And Stroke 3.7 X 4.7 In. (94X120 Mm)-Displacement 203 Cu. In. (3331 Cc)-4 Valves Per Cylinder-Maximum Torque 185.9 Fl. Lbs (252.0 N-M) @1500 To 1700 Rpm-Inline Piston Type Fuel Injection Pump-Electric Key Stop Fuel Shutoff-Forced Lubrication-Liquid Cooled W/Pressurized Radiator-Standard Mechanical Radiator Cooling Fan-Cold Weather Start Aid Glow Plugs, Individual Per Cylinder-Hand And Foot Throttl-Double Element Air Filter-Spin On Type Oil Filter-Horsepowerengine Net @ Rpm: 71.0 Hp (52.9Kw) @ 2600 Rpmpto @ Rpm: 64.0 Hp (47.7 Kw) @ 2600 Rpmcooling System:-Liquid Cooled W/Pressurized Radiator-Positive Water Pump-Air Flow Radial, Front To Rear-Radiator Fan Standard Mechanical Cooling Fan-Standard Radiator Screensfuel System:-Diesel-Standard Fuel/Water Separator-Replaceable Cartridge Fuel Filter-Fuel Drainfluid Capacities:-23.8 Gal. (90.0L) Fuel Tank Capacity-6.2 L Cooling System Capacity-8.0 L Engine Lubricant Oil Capacity-10.6 Gap (48.0 L) Transmission Oil Capacity-8.0 Front Axle Gear Case- Minimum 1.0 L Washer Fluidchassis, Axles And Brakes:-Hydrostatic Power Steering-Bevel Gear Type Front Axle, 4Wd-Limited Slip Differential-Final Drive, Inboard Planetary-Mechanical, Wet Disc Brake Type-Parking Brake On Master Brake Pedaldrive Train/Transmission:12F/12R Plus Creeppower Take Off (Pto):-Hydraulic Independent Pto With Pto Brake, Wet Discs-Rear Pto 540 Rpm Standard-Rear Pto Speed 540 @ 2160 Rpm-Multiple Wet Disc Pto Clutch-Flip Up Type Pto Shieldhydraulic System:-Open Center-Implement Pump 16.2 Gpm (1.5 L/Min)-Power Steering Pump 6.1 Gpm (23.1 L/Min)-Total Hydraulic Flow 22.3 Gpm-3 Rear Remote Valves- 2 Self-Cancelling Detent And 1 Float.-2 Rear Hydraulic Ports-3-Point Hitch-Category I And Ii C/W Two External Cylinders-Position Control-Draft Control-Top Link Sensing-Right Side Adjustable Lifting Rod-Telescopic Lower Link Ends-Telescopic Stabilizers-Top Link Standardlift Capacity:-4189 Lbs. (1900 Kg) At Lift Points-3307 Lbs. (1500 Kg) 24" Behind Lift Pointdraw Bar:-Standard Swing Type-2 Positions- Clevis And 1 1/4 " Pinelectrical:-100 Amp Alternator-12 Volt Battery, 900 Cca-Csa Approved Block Heater And Oil Pan Heater Minimum 250 Watt-Electric Key Stop Engine Shut-Off-Electronic Panel-Engine Tachometer, Temperature And Fuel Level Gauges-8 Indicator Lights Including Oil Pressure, Battery, Low Fuel, Park,Pto, Glow Plug, Turn Signals, High Beam-Instrument Panel With Pto Rpm And Travel Speed Monitor-Lights- 2 Head Lights, 2 Corner Lights, 2 Rear Working Lights, 2 Taillights, 4 Safety Flashers, Dome Light-Stand Horn-Back Up Beepertires:-Nokian M Series For Tractors Sud, Dt, Dths, Dthsc And 1Front: 360/80R20rear: 440/80R30 (16.9R30) Steel Center-Rear Tires Filled With Envirofluid Rated To -35 Degrees Celsius-Rear Fender Wide Round Shapesafety Equipment:-Standard Safety Switches-Standard Operator's Presence Control (Opc)-Electric Key Stop Engine Shut-Off-Standard, Retractable Seat Belts-Operator's Manual-Mechanical, Wet Disc Brakes-Parking Brake On Master Brake Pedal-Standard Grab Handles For Entry/Exit-4 Four-Way Flashers With Turn Signals-High Visibility Paint Color On Tractor, Box Scraper And Snow Blower- Slow Moving Vehicle Sign (International) Appropriate For Size Oftractorcab Features:-Un-Obstructive Viewing On All Side Of The Tractor-Easy Left Or Right Access To Cab-Rops Certified-Certified 10 Lb. Dry Chemical Fire Extinguisher And Mount, No Plasticparts.-Hanging Pedals-5-Position Tilt Steering Wheel-Reclining Seat, Full Adjustment (Weight, Fore And Aft), Arm Rests-Seat Back Tilt-Heater- Minimum 14,750 Btu (4.30 Kw)-Air Conditioning Minimum 13,500 Btu (3.95 Kw)-Re-Circulation And Fresh Air-Radio Heavy Duty Factory C/W Mp3 Input And Weather Band-Standard Beverage Holder-Standard Sun Visor, Tinted Glass-Electric Outlet Interior 12 Volt, 3-Pin, 30 Amp-Electric Outlet Trailer 7-Pin Coupler-Standard Horn-Mirrors-Standard Left And Right-Wipers-Standard Front And Rear-Windshield Washers Front And Rear-Rear Window Defogger- Defroster On Front Windows And Doors-C/W Operator's Manual English And French-Loader Operator Manual-Front Grill Guard - Fold Downc/W Front End Loaderloader Specifications:-Hydraulic Self-Leveling-Euro-Type Quick Attach Couplerbucket:- 82" Bucket 210H Euro-Coupler-Volume Minimum 17.5 Ft³box Scraperbox Scraper Specifications:-Width: 84"-Minimum 12 Cu. Ft.-Max. Working Depth: 4"C/W Rear Mounted Snowblower Snow Blower Specifications:-Working Width: 85"-Transport Width: 80 ½"-Cutting Height: 33"-Length: 49" Min-52" Max-Single Auger-Auger Diameter: 20"-Auger Flight Thickness: Minimum 7 Gauge-Impeller Diameter: 25"-Impeller Width: 10 ½"-Impeller Shaft Diameter: 1 9/16"-Number Of Impeller Blades: 4-Roller Chain: #60-Drive Sprocket No. Of Teeth: 12-Driven Sprocket No. Of Teeth: 32-Chain Idler: Twin Sprocket-Tractor Rpm: 540-Impeller Rpm: 540-Auger Rpm: 169-Pto Description: 50-Skid Shoe: Adjustable And Replaceable-Skid Shoe Material: High Carbon Steel-End Plate Thickness: .1196"-Back Plate Thickness: 3/16"-Impeller Housing Thickness: 3/16" Cht100-Impeller Blade Thickness: 5/16"-Side Panel Bottom Thickness: ½"-Cutting Edge: High Carbon Steel, Replaceable And Reversible-Cutting Edge Dimension: ½"X3"-Parking Stand: Standard-Hitch Category: Cat. 1 And 2-Quick Hitch Compatibility: Asabe Compatible-Hp Requirements-Min-Max: 60-90 Hp-Operating Weight (Lbs)-Hyd. Rot. And Deft.: Minimum 848 Lbs-Chute Deflector Adjustment: Hydraulic Cylinder Including Hoses And Tips-Chute Rotation (Standard): Hydraulic With Motor-Chute Option: 3 Part With Hydraulic Deflectorc/W Pallet Forks:-Minimum 2500 Kg Lift Capacity-Minimum 47" Long Forks-Euro # Quick Connectdelivered In Usable State With Front Ender Loader Attachment In Place.To Be Delivered In Usable State With Front Ender Loader Attachment Inplace.Please Advise The Following Information On The Product Offered:Model Year____________________Brand Name ____________________Model Number___________________========================================================Note:If Any Of The Above Items/Features Are Accessories They Are To Beincluded And Installed Prior To Delivery. It Is The Suppliersresponsibility To Test All Systems To Ensure They Are Functioningproperly Prior To Delivery.Quotation Evaluation:Generally The Lowest Overall Price Of Each Acceptable Item Inaccordance With The Terms &Amp; Conditions Of The Rfq Will Be Awardedthe Order.Quotations Will Be Evaluated Based On Suitability Of Product Offeredcompared To The End Users Needs, Description/Specifications Of Theproduct Offered, Delivery, Price, Quality Of The Bidder's Performance Inpast Awards And Any Other Terms &Amp; Conditions Indicated On This Rfqfailure To Provide Adequate Information To Evaluate The Item Offeredmay Be Cause For Rejection Of Your Quote By Manitoba.Quality / Acceptability:Any Product Supplied Must Be New, Unused, First Quality.Demo Units Will Not Be Accepted.All Goods Delivered Are Subject To Inspection Prior To Deliveryacceptance. Signing Of Any Delivery Slip Should Not Be Construed Asacceptance Of The Product Delivered. Manitoba Reserves The Right Toreject Any Product, After Final Inspection That Does Not Meet Thespecification Or Product Description Requested.Manitoba Reserves The Right To Reject Any Product Suppliedwhich, Upon Inspection Or Use, Is Deemed By The Using Department To Beunacceptable For Their Intended Use.Products To Be Supplied As Specified On The Contract/Purchase Order. Anysubstitutes Shipped Without Prior Written Approval Will Be Rejected Attime Of Delivery Or Held At Shipper's Risk Pending Return Instructionsproducts Rejected By The Using Department Will Be Returned To The Vendorfor Full Credit Or Replacement Product At No Cost To Manitoba Or Thecontract May Be Cancelled.Product:Items Offered Are To Meet Or Exceed The Specifications Indicated For Theitems Listed.If It Is Your Intention To Offer An Item Which Does Not Meet All Thespecifications Outlined, Then You Must Indicate All Intended Deviationsor Changes On The Return Quote.In The Absence Of Any Particular Construction Details, The Productoffered Is To Be Completed With First Quality Design, Manufacturing,Finishing Techniques And Materials As Required To Produce A Firstquality Product For The Intended Use.It Should Be Noted That Clarification Of Missing Details May Requirediscussions Etc. With The End User.Ddp Destination, Freight Prepaid To:Environment, Climate And Parksst. Malo Provincial Parkst. Malo Mb R0a 1T0(Include All Necessary Charges E.G. Freight, Insurance, Handling Etc.)If Any Charges Are Not Included Please Explain In Detail Any/All Chargesthat Will Be Extra To The Unit Prices Quoted And That Will Be Charged Onthe Invoice.Warranty:Manufacturer's Warranty:State Warranty Of Units Offered ( As Applicable To Manitoba's Use)(Manitoba's Use Would Usually Be Considered Commercial Applicationnot Consumer)Product _________ Months Or _______ Yearslabour _________ Months Or _______ Yearsplease Note: During The Period Of The Warranty Offered, All Labour,Transportation, Parts, Surcharges Including Shipping And Brokerage Willbe Included. The Province Of Manitoba Will Not Pay Additional Chargeswhile The Item(S) Offered Are Under The Above Stated Warranty.If The Warranty Offered Is The Vendor's Warranty In Combination With Orin Place Of The Manufacturer's Warranty Then A Completeexplanation Must Be Provided.Warranty Service/Location:Potential Costs Associated With The Location Of Warranty Servicemight Be Used In The Evaluation Of This Quoteis Warranty Service Provided On Site At Our Premises?Yes___ Or No____If No≪(≫,≪)≫Indicate The Location The Unit Must Be Sent To For Manufacturer'scertified And/Or Approved Warranty Service, Closest To The Point Ofdelivery, For This Tender≪(≫,≪)≫Company Name_______________________Location (City &Amp; Province)______________Do You Have A Toll Free Phone Number For Warranty Service?Yes______ Or No______If Yes, Please Provide:________________________Non-Warranty For Parts And Service:Please Provide Details As Follows For The Unit(S) Offered(For Occasional Non-Warranty Service And Parts Purchases)Current Labour Rate For In-Shop Service $_________ Per Hourparts And Accessories Charged At:________ % Discount From ____________________ Prices(Indicate Retail, Wholesale Etc.)After Warranty Service:Is After Warranty Service Provider The Same As Above?Yes ___ Or No_____If No Please Advisecompany Name_______________________Location (City &Amp; Province)______________Governing Laws:Manitoba Requires Its Suppliers To Adhere To Provincial Labour Laws And,Where Businesses Use Sources Outside Of Canada, Manitoba Expectssuppliers To Comply With Local Labour Laws In The Country Ofmanufacture.Indigenous Business Standard For "Goods With Related Services"Definitions:"Indigenous Business" Means A Business That Is At Least 51% Indigenousowned And Controlled And, If It Has Six Or More Full-Time Employees, Atleast One-Third Of Its Employees Must Be Indigenous Persons."Indigenous Business Directory" Means A Business Directory Of Indigenousbusinesses That Meet Manitoba's Definition Of An Indigenous Business.'Indigenous Business Standard" Means Terms And Conditions That Indicatethat Indigenous Business Participation Is Desirable But Not Mandatory."Indigenous Person" Means A First Nations, Non-Status Indian, Métis Orinuit Person Who Is A Canadian Citizen And Resident Of Canada.Indigenous Procurement Initiative:Manitoba Is Committed To Community Economic Development As A Keycomponent Of Its Economic Strategy. It Intends To Develop A Provincialeconomy That Is More Inclusive, Equitable And Sustainable.Procurement Practices Are One Means That Can Be Used To Contribute Tothe Growth Of Indigenous Businesses. In That Regard, Manitoba Developedthe Indigenous Procurement Initiative (Ipi). The Objective Of Ipi Is Toincrease The Participation Of Indigenous Businesses In Providing Goodsand Services To Manitoba.Indigenous Business Standard:Indigenous Participation Is Desired But Bids Will Not Be Disqualified Ifthere Is No Indigenous Business Participation.Indigenous Business Directory:Manitoba Has Established A Directory Of Indigenous Businesses Called The"Indigenous Business Directory". This Directory Is A List Of Indigenousbusinesses (Including Non Profit Organizations And Economic Developmentcorporations) That Have Self Declared As An Indigenous Business Meetingthat Definition Under The Ipi. It Is Neither Comprehensive Norexhaustive But May Be A Useful Resource To Identifying Indigenousbusinesses For Potential Partnering Or Sub-Contracting Purposes.Indigenous Businesses Not Listed In The Directory May Also Be Used.Registration In The Indigenous Business Directory Does Not Guaranteecertification As An Indigenous Business, As Business Status May Change;Therefore Formal Certification Is Required In The Formal Tenderprocess.Indigenous Businesses Are Encouraged To Register By Contactingmanitoba Labour, Consumer Protection And Government Services Procurementand Supply Chain (Psc).For Further Information On The Indigenous Business Directory≪(≫≪≪)≫(≫,≪(≫≪≪)≫)≫Registration Forms And Access To A Copy Of The Indigenous Businessdirectory Please See The Following Website:Http://Www.Gov.Mb.Ca/Finance/Psb/Api/Api Bd.Html Or Contact:Manitoba Labour, Consumer Protection And Government Servicesprocurement And Supply Chain (Psc)600 - 352 Donald Streetwinnipeg, Manitobar3b 2H8ph: 204-945-6361For All Other General Inquiries Related To This Tender Opportunity,Please Contact The Name Of The Individual Identified On Page One Of Thistender Document.Termination:Manitoba May, In Its Sole Discretion, Immediately Terminate A Purchaseorder/Contract In Writing If:A) The Vendor Fails To Properly Fulfill, Perform, Satisfy And Carry Outeach And Every One Of Its Obligations Under The Purchase Order/Contract,Orb) The Vendor Fails Or Refuses To Comply With A Verbal Or Writtenrequest Or Direction From Manitoba Within Three(3) Days Of Receiving Therequest Or Direction; Orc) The Vendor Become Bankrupt Or Insolvent Or Liquidates; Ord) A Receiver, Trustee Or Custodian Is Appointed For The Assets Of Thevendor, Or Any Partner Thereof; Ore) The Vendor Or Any Partner Thereof Makes A Compromise, Arrangement, Orassignment With Or For The Benefit Of The Creditors Of The Vendor Or Ofthat Partner, As The Case May Be; Orf) The Vendor Fails To Secure Or Renew Any License Or Permit For Thevendors Business Required By Law; Or Any Such License Or Permit Isrevoked Or Suspended; Org) The Vendor Or Any Partner, Officer Or Director Of The Vendor Is Foundguilty Of An Indictable Offence; Orh) The Vendor Fails To Comply With Any Law Or Regulation Relating To Theemployment Of Its Employees; Ori) The Vendor At Any Time Engages In Any Activities Or Trade Practiceswhich, In The Opinion Of Manitoba, Are Prejudicial To The Interests Ofmanitoba, Or A Department Or Agency Thereof; Orj) There Is A Breach Of Any Provision Of The Purchase Order/Contract.K) The Goods Provided By The Vendor Are Not According To The Contract Orotherwise Unsatisfactory; Orl) The Services Provided By The Vendor Are Unsatisfactory, Inadequate,Or Are Improperly Performed; Orm) The Vendor Has Failed To Meet The Delivery Date Indicated On Thepurchase Order/Contract Or Repeatedly Failed To Meet The Delivery Leadtime, Indicated On The Purchase Order/Contract.Manitoba May, In Its Sole Discretion, Terminate The Purchaseorder/Contract At Any Time By Giving At Least 30 Days Written Notice Tothe Vendor Prior To The Intended Termination Date. This Termination Maybe Used For Those Instances Where There Are Program Changes, Fundingchanges, Etc.Registration/Forms:All Dealer Supplied Forms That Are Required For The Department Toregister/Insure The Unit In Manitoba Must Be Fully Completed Andprovided Immediately On Delivery.Publicity, Media And Official Enquiries:Neither The Bidder Nor Its Suppliers/Vendors, Employees Or Consultantsshall Make Any Public Statement Relating To The Existence Or Performanceof The Purchase Order/Contract Without The Prior Written Consent Of Theprovince Of Manitoba, Which Shall Not Be Unreasonably Withheld.The Provision Of This Condition Shall Apply During The Extension Of Apurchase Order/Contract And Indefinitely After Its Expiry Ortermination.Confidentiality:The Content Of This Rfq And Any Other Information Received By The Bidderrelating To The Rfq, Gained Through The Rfq Process Or Otherwise, Is Tobe Treated In Strict Confidentiality. The Bidder Shall Not Disclose Anyof The Information In Whole Or In Part To Anyone Not Specificallyinvolved In The Preparation Of The Bidder's Quotation, Unless Writtenconsent Is Secured From Manitoba Prior To The Said Disclosure. Theobligation Of Each Bidder To Maintain Confidentiality Shall Survive Theexpiration Or The Acceptance/Rejection Of Their Quotation And/Or Anyresulting Contract/ Agreement(S) To Supply The Requirements Of This Rfq.Vendor Information:Right To Reissue Rfqmanitoba Reserves The Right To Cancel And/Or Reissue The Rfq Where, Inmanitoba's Sole Opinion, None Of The Quotes Submitted In Response To Therfq Warrant Acceptance Or Where It Would Be In The Best Interests Ofmanitoba To Do So. Costs Incurred In The Preparation, Presentation Andsubmission Of A Quote Shall Be Borne Entirely By The Bidder. Manitobashall Not Reimburse Any Bidders For Any Costs If The Rfq Is Cancelled Orreissued.Authorized Vendor:Manitoba Reserves The Right, Prior To Any Contract Award, To Secureevidence To Manitoba's Satisfaction That Any Bidder Is The Manufactureror An Authorized Distributor, Dealer Or Retailer Of The Goods Offeredand Is Authorized To Sell These Goods In Manitoba, Canada And Uponrequest Will Provide Manitoba With Written Evidence Thereof.Invoicing And Payment:Subject To The Following Subsections, In Consideration The Goodsprovided Or Delivered To The Satisfaction Of Manitoba, Manitoba Shallpay The Contractor An Amount Not Exceeding The Amount Specified In Thesuccessful Contractor's Bid Submission.All Invoices Shall Be Issued In Writing And Satisfactory To Manitoba Inboth Form And Content. The Contractor Shall Also Provide To Manitobasuch Supporting Documents, Vouchers, Statements And Receipts Asrequested By Manitoba.Manitoba Shall Endeavor To Pay The Contractor Any Fees Due Within 30Days Net After The Receipt And Approval Of The Invoice And Anysupporting Materials Requested.Canadian Funds:Manitoba Prefers To Receive Quotations In Canadian Funds.If The Pricing Offered Is Quoted In A Currency Other Than Canadian Thenthe Currency Is To Be Clearly Identified On The Quote Document.Accounts Receivable Address:Due To Our Computerized Accounts Payable System Please Advise Ifyour Invoice Address (Accounts Receivable) Is The Same As The Addressfor Orders / Quotes Shown Aboveyes ____ Or No ______If No Provide Complete Details I.E. Box #, Street Address, City≪(≫,≪)≫Province, Postal Code, Etc. _________________Manitoba's Retail Sales Tax License:Are You Licensed By Manitoba Finance To Collect And Remitmanitoba's Retail Sales Taxyes_____ Or No_____If No Disregard The Following Paragraph.Manitoba's Retail Sales Tax:Is The Product(S) Offered Subject To Manitoba's Retail Sales Taxyes____ Or No _____If The Quote Consists Of Both Taxable (T) And Non-Taxable ( Nt) Itemsplease Indicate T Or Nt Opposite Each Item Offered.Payment Terms:Manitoba Will Consider Early Payment Terms. Manitoba's Standard Paymentterm Is Net Thirty (30) Days.The Bidder Shall Specify Their Standard Invoice Term:_____________________________Is There Any Applicable Discounts For Early Payment?Yes _____ No _____ Initial __________If Yes, Please Specify:_____________________________________________________Does Your Early Payment Clause Appear On Your Invoice?Yes _____ No _____ Initial __________Your Quotation Reference # (If Applicable) ________Proposed Delivery Address:Tenders To Be Returned To:Merx Electronic Bid Submission Www.Merx.Com