Tenders Are Invited For Supply & Delivery Of Firearms, Accessories

Supply &Amp; Delivery Of Firearms, Accessories - Manitoba Reference Number: Mb-Mbpb-25T-00003Issuing Department: Procurement And Supply Chaindate Issued: 05/12/2022Issued By: Chuck Brighttelephone: 204 945-6353The Government Of Manitoba (Manitoba) Is Requesting Bid Submissions Thesupply And Delivery Of Firearms And Accessories.Note:For Information Or Item Clarification, If Required≪(≫,≪)≫Contact: Procurement And Supply Chainchuck Bright At [email protected] Destination, Freight Prepaid To:Manitoba Natural Resources And Northern Developmentconservation Officer Service1383 Whyte Avewinnipeg, Mb.R3e 1V7please Contact The Individual Noted Above If Additional Information Orclarification Is Required On The Following Items.Bidder Must Indicate If You Are Able To Meet The Requesteddelivery Of Date Of March 31,2023 Yes ____ Or No ____If No, Then Indicate A Realistic Delivery As Follows:Delivery In ___ Working Days Or ____Weeks From Receipt Of The Order.This Procurement Is Subject To Canadian Free Trade Agreement.General Terms &Amp; Conditions:Bidders Must "Login" To Merx To Access The General Terms &Amp; Conditionswhich Apply To This Rfq, In Addition To Those Shown Below. After"Login" Follow The Links: Information -≫ Government Publications -≫Manitoba Terms And Conditions -≫ Request For Quotation.Submission Terms And Conditions:The Bid Must Be Signed By A Representative Of The Bidder With Theauthority To Bind The Bidder. The Name And Title Of The Representativesigning The Bid Should Also Be Printed Below Their Signature.Vendor's E-Mail Address: (If Available) ____________________Quantity Clarification: Quantity Listed Contains 2 Or 3 Decimals._________________________________________________________________________Item Qty Description Deliveryno. Date========================================================Item 10 31/03/2023100.00 Each Gsin: N1000material: 99203010Pistols, Shotguns And Rifles As Described Below:7.62X51mm/.308 Winchester Ar10 Style Rifles:Direct Impingement Operating System.Rifle Bare Weight No Greater Then 8.6Lbs.Anodized Black In Colour.Cold Hammered Forged Barrel 1:10" Twist, 16" In Length, Not Includingmuzzle Device.User-Adjustable Gas Block For Reliable Suppressed And Un-Suppressedfiring.M-Lok Mounting System Along Minimum Two Axis Of Handguard/For Endgeiselle Trigger Two Stage.Pull Weight No Greater Then 4.75Lbs.Milspec Trigger Pin Size.Diamond Like Coating (Dlc) On Bolt Carrier Group.Tungsten Weighted Buffer System In Bolt.Minimum 5 Position Butt Stock Extension And Adjustability.Soft Touch Over Molding.Pistol Grip.Soft Touch Over Molding.Integrated Quick Disconnect (Qd)Points For Sling Attachments:Minimum Of Three Different Locations.Butt Stock.Lower Receiver Above Pistol Grip.Handguard Or For End.Ambi - Charging Handle, Bolt Catch, Magazine Release, And Safetyselector (Low Profile).Qd Flash Hider Compatible With Suppressors Listed Below.4 Bolt Connection System For Barrel And For End.Manitoba Cos Logo Engraved Along Magazine Well.(Vector Pattern Can Be Supplied If Requested).Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 20 31/03/2023100.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Iron Sights:Front Sight Steel, Fold Away, Tritium Or Glow Front Post Adjustable.Rear Sight Steel, Fold Away, Peep, Two Aperture Sizes Adjustable.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 30 31/03/2023100.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Holographic Sights:Reticle 0 Moa Circle With 1 Moa Dot Or Similar.Requires A Lithium Battery Cr123 (Included).Minimum Of 1000 Hours Battery Life On Normal Setting.Weight No Greater Then 255G (9.0Oz).Water Resistant Up To 3 Meters.Mounts To Facilitate Lower 1/3 Co Witness To The Iron Sights.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 40 31/03/2023400.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Magazines:7.62X51.20 Round Capacity.Polymer Style Construction.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 50 31/03/2023100.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Slings:Adjustable Length.Black In Colour.Single Point And Two Point Capabilities.Comes With Qd Mounts To Attached To Rifle.Low Profile Quick Adjust Slider.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 60 31/03/202320.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Suppressors:Minimum 24Dba Noise Reduction.Compatible With The Qd Flash Hider.Inconel Baffles.Weight No Greater Then 550G.Tube Diameter No Greater Then 52Mm.Length Past The Barrel No Greater Then 130Mm.Gas Forward Venting Design.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 70 31/03/2023100.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Flashlights:Approximately 1000 Lumens Of Light.Rear Thumb Activation.Requires Lithium Battery Cr123 (Included).Mounting Hardware For M-Lok Or Mil - Std - 1913 Railblack In Color.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 80 31/03/2023100.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Soft-Sided Gun Cases:Designed To Hold The Ar10 Rifle Platform.Floating And Waterproof Capabilities.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 90 31/03/2023100.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Hard Gun Cases:Designed To Hold The Ar10 Rifle Platform.Lockable.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 100 31/03/2023300.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Safety Trainers:Nickle Case With A One-Piece Abs Plastic Insert..308 Win Caliber.Insert Orange In Colour.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 110 31/03/2023100.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Ar10 Cleaning Kits:Take Down Cleaning Kit, Rod, Brass Jag, Brush Adaptor≪(≫,≪)≫Bronze Bore Brush, Chamber Brush.Barrel And Action Cleaning Solvent 100 Ml.100 Cotton Or Similar Cleaning Patched, Sized Of .308 Caliber.Extreme Weather Lubricant 100 Ml.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 120 31/03/202310.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Armoring Kits For The Ar10 Platform:Complete With Tools To Support The Armouring Of The Firearms.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Item 130 31/03/20231.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Spare Parts:25 Chamber Flags.20 Packs - Socket Head Cap Screws (X4).4 Ambidextrous Charging Handles.2 Complete Bolt Carrier Groups.2 Forward Assists, Springs, And Pins.10 Crush Washers For Muzzle Device.1 Butt Stock Assembly.50 Selector Detent With Spring.10 Caps For Pistol Grip.4 Receiver Extensions.5 Buffer Springs.4 Castle Nuts.5 Buffer Retaining Springs And Pins.5 Hammer Springs.5 Trigger Springs.4 Magazine Catch Springs.4 Bolt Catch Springs Left And Right.2 Bolt Catches Left.4 Bolt Catch Plungers And Spring.25 Detent Pivot Pins And Springs; Front And Back.4 Pivot Pins.12 Hammer/Trigger Pins.12 Selector Lever Screws.2 Ambi Selector Levers.12 Firing Pins And Return Springs.12 Spring Pin Slotted, Retaining, Firing Pin Retaining Pins.6 Firing Pin Retaining Pins.6 Cam Pins.12 Extractors With Buffers, Springs, And Pins.2 Bolts.12 Ejectors And Springs.12 Spring Pin Slotted, Ejector Retaining.30 Gas Rings (3Packs) (90 Rings Total).25 Mloc Covers.========================================================Item 140 31/03/20231.00 Each Gsin: U099smaterial: 50000513Training Service, Hunter Firearmstraining:Armour Course.The Vendor Must Provide An In-Person Armourer's Course At A Location Inthe Province Of Manitoba For A Maximum Of 10 Officers For The Patrolrifle That It Is Provided.This Manufacturer Certified Armourer's Course, Which Must Beadministered By A Manufacturer-Approved And Trained Instructor, Shallcertify Manitoba's Bfis To Maintain, Completely Disassemble, Inspect,Service, Re-Assemble And Repair The Patrol Rifles While Preserving Thefactory Warranty.Upon Successful Completion, The Bfis (Armourers) Will Fully Understandeach Patrol Rifle And Be Certified For A Period Of At Least Three Years.The Vendor Must Also Provide Relevant Armourers Manuals For The Patrolrifle That Is Selected.Course Should Be Approximately 3 Days In Length.Delivery Within 90 Days From Conservation Officer Service Receiving Thefirearms.========================================================Item 150 31/03/20231.00 Each Gsin: U099smaterial: 50000513Training Service, Hunter Firearmstraining:Operator/Familiarization Course:The Vendor Shall Provide Hands On Familiarization Training At A Locationin The Province Of Manitoba For A Maximum Of 10 Officers Which Must Beadministered By A Manufacturer-Approved And Trained Instructor And Whichmust Include At Minimum, How To:Fundamentally Shoot The Patrol Rifle, Conduct Safety Checks,Nomenclature, And Field Strip.Practical Handling Lessons, Workspace, And Accessing Magazines. Loadingand Unloading The Firearm.Carrying Positions, Ready Positions, And Shooting Positions. Utilizingthe Sling In Single And Two Point Options With Transitioningbilaterally.Marksmanship, Zeroing, And Mechanical Offset.Use Of The Red Dot Optics.Presentation And Set Time.Conducting Emergency, Tactical, And Speed Reloading.Clearing Stoppages And Transitioning To Pistol.Using Improvised Rifle Sights.Engaging Multiple Targets.Movement Before And While Shooting.Shooting On And Off Cover.Shooting In Low Light/No-Light Tactics With Flashlight.Installation And Removal Of The Suppressors.This Training Should Be Approximately 5 Days In Length.Estimated Round Count 500 Rifle And 100 Pistol, Supplied By The Vendor.Delivery Within 90 Days From Conservation Officer Service Receiving Thefirearms.========================================================Item 160 31/03/202325.00 Each Gsin: N1300material: 99201020Firearm Accessories As Described Below:Angled Fore Grips:Magpul Afg M-Lok Style.Black In Colour.Please Indicate:Brand Name And Product # Of Item Offered Is Exactly As Requested Above:Yes _______ Or No ______If No, Please Advise Information On The Product Offered As Follows:Manufacturers Name__________Brand Name______________Product / Style Number ________Bidder's Catalogue/Reference Number (If Applicable) ____________========================================================Please Note The Following:Quotation Evaluation:Generally The Lowest Overall Price Of An Acceptable Item(S) Inaccordance With The Terms &Amp; Conditions Of The Rfq Will Be Awarded Theorder.Quotations Will Be Evaluated Based On Suitability Of Unit Offeredcompared To The End Users Needs, Product Specifications, Price,Delivery, Quality Of The Bidder's Performance In Past Awards And Anyother Terms &Amp; Conditions Indicated On This Rfq.Suitability Evaluation To Be At Manitoba's Sole Discretionfailure To Provide Adequate Information To Evaluate The Item Offeredmay Be Cause For Rejection Of Your Quote By The Manitobagovernment(Manitoba)Product Offered:The Product Offered Must Meet The Requirements And Expectations Forit's Intended Useif It Is Your Intention To Offer An Item, Which Does Not Meet All Thespecs/Description As Outlined, Then You Must Indicate All Intendeddeviations Or Changes On The Return Quote.Quality / Acceptability:Any Product Supplied Must Be New, Unused, First Quality.All Goods Delivered Are Subject To Inspection Prior To Deliveryacceptance. Signing Of Any Delivery Slip Should Not Be Construed Asacceptance Of The Product Delivered. Manitoba Reserves The Right Toreject Any Product, After Final Inspection That Does Not Meet Thespecification Or Product Description Requested.Manitoba Reserves The Right To Reject Any Product Supplied Which, Uponinspection Or Use, Is Deemed By The Using Department To Beunacceptable For Their Intended Use.Products To Be Supplied As Specified On The Contract/Purchase Order.Any Substitutes Shipped Without Prior Written Approval Will Be Rejectedat Time Of Delivery Or Held At Shippers Risk Pending Return Instructionsproducts Rejected By The Using Department Will Be Returned To Thevendor For Full Credit Or Replacement Product At No Cost To Manitobaor The Contract May Be Cancelled.Delivery:F.O.B Destination, Freight Prepaid To:Manitoba Natural Resources And Northern Developmentconservation Officer Service1383 Whyte Avewinnipeg, Mb.R3e 1V7unit Prices Include All Necessary Charges E.G. Freight, Insurance,Handling Etc.)If Any Charges Are Not Included Please Explain In Detail Any/All Chargesthat Will Be Extra To The Unit Prices Quoted And That Will Be Charged Onthe Invoice.Inspection:Final Inspection And Acceptance Or Rejection Of The Goods Will Be Madepromptly As Practicable, But Failure To Inspect And Accept Or Rejectgoods Promptly Does Not Mean That The Manitoba Government Has Acceptedthese Goods. The Government Of Manitoba Reserves The Right To Inspectthe Goods For Up To 90 Days After The Date Of Delivery.Partial Acceptance Of Rejection Of An Order Does Not Release The Bidderfrom Its Responsibility To Complete The Order.Costs:Costs Incurred In The Preparation, Presentation And Submission Of A Bidshall Be Borne Entirely By The Bidder.Governing Laws:Manitoba Requires Its Suppliers To Adhere To Provincial Labour Lawsand, Where Businesses Use Sources Outside Of Canada, Manitobaexpects Suppliers To Comply With Local Labour Laws In The Country Ofmanufacturetermination:Manitoba May, In Its Sole Discretion, Immediately Terminate A Purchaseorder/Contract In Writing If:A) The Vendor Fails To Properly Fulfill, Perform, Satisfy And Carry Outeach And Every One Of Its Obligations Under The Purchase Order/Contract,Orb) The Vendor Fails Or Refuses To Comply With A Verbal Or Writtenrequest Or Direction From Manitoba Within Three(3) Days Of Receiving Therequest Or Direction; Orc) The Vendor Become Bankrupt Or Insolvent Or Liquidates; Ord) A Receiver, Trustee Or Custodian Is Appointed For The Assets Of Thevendor, Or Any Partner Thereof; Ore) The Vendor Or Any Partner Thereof Makes A Compromise, Arrangement, Orassignment With Or For The Benefit Of The Creditors Of The Vendor Or Ofthat Partner, As The Case May Be; Orf) The Vendor Fails To Secure Or Renew Any License Or Permit For Thevendors Business Required By Law; Or Any Such License Or Permit Isrevoked Or Suspended; Org) The Vendor Or Any Partner, Officer Or Director Of The Vendor Is Foundguilty Of An Indictable Offence; Orh) The Vendor Fails To Comply With Any Law Or Regulation Relating To Theemployment Of Its Employees; Ori) The Vendor At Any Time Engages In Any Activities Or Trade Practiceswhich, In The Opinion Of Manitoba, Are Prejudicial To The Interests Ofmanitoba, Or A Department Or Agency Thereof; Orj) There Is A Breach Of Any Provision Of The Purchase Order/Contract.K) The Goods Provided By The Vendor Are Not According To The Contract Orotherwise Unsatisfactory; Orl) The Services Provided By The Vendor Are Unsatisfactory, Inadequate,Or Are Improperly Performed; Orm) The Vendor Has Failed To Meet The Delivery Date Indicated On Thepurchase Order/Contract Or Repeatedly Failed To Meet The Delivery Leadtime, Indicated On The Purchase Order/Contract.Publicity, Media, Official Enquiries And Advertising:Neither The Bidder Nor Its Suppliers/Vendors, Employees Nor Consultantsshall Make Any Public Statement Making Reference To, Or Relating To Theexistence Or Performance Of The Purchase Order/Contract In Anyadvertising, Testimonials Or Promotional Material Without The Priorwritten Consent Of The Province Of Manitoba, Which Shall Not Beunreasonably Withheld.The Provision Of This Condition Shall Apply During The Extension Of Apurchase Order/Contract And Indefinitely After Its Expiry Ortermination.Confidentiality:The Content Of This Rfq And Any Other Information Received By The Bidderrelating To The Rfq, Gained Through The Rfq Process Or Otherwise, Is Tobe Treated In Strict Confidentiality. The Bidder Shall Not Disclose Anyof The Information In Whole Or In Part To Anyone Not Specificallyinvolved In The Preparation Of The Bidder's Quotation, Unless Writtenconsent Is Secured From Manitoba Prior To The Said Disclosure. Theobligation Of Each Bidder To Maintain Confidentiality Shall Survive Theexpiration Or The Acceptance/Rejection Of Their Quotation And/Or Anyresulting Contract/ Agreement(S) To Supply The Requirements Of This Rfq.Vendor Information:Right To Reissue Rfq:Manitoba Reserves The Right To Cancel And/Or Reissue The Rfq Where≪(≫,≪)≫In Manitoba's Sole Opinion, None Of The Quotes Submitted In Responseto The Rfq Warrant Acceptance Or Where It Would Be In The Bestinterests Of Manitoba To Do So. Costs Incurred In The Preparation≪(≫,≪)≫Presentation And Submission Of A Quote Shall Be Borne Entirely By Thebidder. Manitoba Shall Not Reimburse Any Bidders For Any Costs If Therfq Is Cancelled Or Reissued.Authorized Vendor:Manitoba Reserves The Right, Prior To Any Contract Award, To Secureevidence To Manitoba's Satisfaction That Any Bidder Is The Manufactureror An Authorized Distributor, Dealer Or Retailer Of The Goods Offeredand Is Authorized To Sell These Goods In Manitoba, Canada And Uponrequest Will Provide Manitoba With Written Evidence Thereof.Indigenous Business Standard For "Goods With Related Services"Definitions:"Indigenous Business" Means A Business That Is At Least 51% Indigenousowned And Controlled And, If It Has Six Or More Full-Time Employees, Atleast One-Third Of Its Employees Must Be Indigenous Persons."Indigenous Business Directory" Means A Business Directory Of Indigenousbusinesses That Meet Manitoba's Definition Of An Indigenous Business."Indigenous Business Standard" Means Terms And Conditions That Indicatethat Indigenous Business Participation Is Desirable But Not Mandatory."Indigenous Person" Means A First Nations, Non-Status Indian, Métis Orinuit Person Who Is A Canadian Citizen And Resident Of Canada.Indigenous Procurement Initiative:Manitoba Is Committed To Community Economic Development As A Keycomponent Of Its Economic Strategy. It Intends To Develop A Provincialeconomy That Is More Inclusive, Equitable And Sustainable.Procurement Practices Are One Means That Can Be Used To Contribute Tothe Growth Of Indigenous Businesses. In That Regard, Manitoba Developedthe Indigenous Procurement Initiative (Ipi). The Objective Of Ipi Is Toincrease The Participation Of Indigenous Businesses In Providing Goodsand Services To Manitoba.Indigenous Business Standard:Indigenous Participation Is Desired But Bids Will Not Be Disqualified Ifthere Is No Indigenous Business Participation.Indigenous Business Directory:Manitoba Has Established A Directory Of Indigenous Businesses Called The"Indigenous Business Directory". This Directory Is A List Of Indigenousbusinesses (Including Non Profit Organizations And Economic Developmentcorporations) That Have Self Declared As An Indigenous Business Meetingthat Definition Under The Ipi. It Is Neither Comprehensive Norexhaustive But May Be A Useful Resource To Identifying Indigenousbusinesses For Potential Partnering Or Sub-Contracting Purposes.Indigenous Businesses Not Listed In The Directory May Also Be Used.Registration In The Indigenous Business Directory Does Not Guaranteecertification As An Indigenous Business, As Business Status May Change;Therefore Formal Certification Is Required In The Formal Tender Process.Indigenous Businesses Are Encouraged To Register By Contactingprocurement Services Branch.For Further Information On The Indigenous Business Directory≪(≫,≪)≫Registration Forms And Access To A Copy Of The Indigenous Businessdirectory Please See The Following Website:Http://Www.Gov.Mb.Ca/Finance/Psb/Api/Api Bd.Html Or Contact:Manitoba Labour, Consumer Protection And Government Servicesprocurement &Amp; Supply Chain Division600-352 Donald St, Canada Buildingph.: 204-945-6361For All Other General Inquiries Related To This Tender Opportunity,Please Contact The Name Of The Individual(S) Identified On Page One Ofthis Tender Document.Invoicing And Payment:Subject To The Following Subsections, In Consideration The Goodsprovided Or Delivered To The Satisfaction Of Manitoba, Manitoba Shallpay The Contractor An Amount Not Exceeding The Amount Specified In Thesuccessful Contractor's Bid Submission.All Invoices Shall Be Issued In Writing And Satisfactory To Manitoba Inboth Form And Content. The Contractor Shall Also Provide To Manitobasuch Supporting Documents, Vouchers, Statements And Receipts Asrequested By Manitoba.Manitoba Shall Endeavor To Pay The Contractor Any Fees Due Within 30Days Net After The Receipt And Approval Of The Invoice And Anysupporting Materials Requested.Payment Terms:Manitoba Will Consider Early Payment Terms. Manitoba's Standard Paymentterm Is Net Thirty (30) Days.The Bidder Shall Specify Their Standard Invoice Term:_____________________________Is There Any Applicable Discounts For Early Payment?Yes _____ No _____ Initial __________If Yes, Please Specify:_____________________________________________________Does Your Early Payment Clause Appear On Your Invoice?Yes _____ No _____ Initial __________Canadian Funds:Manitoba Prefers To Receive Quotations In Canadian Funds.If The Pricing Offered Is Quoted In A Currency Other Than Canadianthen The Currency Must Be Clearly Identified On The Quote Document.Accounts Receivable Address:Due To Our Computerized Accounts Payable System Please Advise Ifyour Invoice Address (Accounts Receivable) Is The Same As The Addressfor Orders / Quotes Shown Aboveyes ____ Or No ______If No Provide Complete Details I.E. Box #, Street Address, City≪(≫,≪)≫Province, Postal Code, Etc._________________Manitoba's Retail Sales Tax License:Are You Licensed By Manitoba Finance To Collect And Remitmanitoba's Retail Sales Taxyes_____ Or No_____If No Disregard The Following Paragraph.Manitoba's Retail Sales Tax:Is The Product(S) Offered Subject To Manitoba's Retail Sales Taxyes____ Or No _____If The Quote Consists Of Both Taxable (T) And Non-Taxable ( Nt) Itemsplease Indicate T Or Nt Opposite Each Item Offered.Your Quotation Reference # (If Applicable) _______Proposed Delivery Address:Delivery Address:Manitoba Natural Resources And Northern Developmentconservation Officer Service1383 Whyte Avewinnipeg, Mb.R3e 1V7tenders To Be Returned To:Merx Electronic Bid Submission Www.Merx.Com