Tenders Are Invited For Hrsgs Hpsh 1 & 3 Top Header Inspection Caps Cutting & Welding

Quotation Are Invited For Hrsgs Hpsh 1 & 3 Top Header Inspection Caps Cutting & Welding At M Station. 5 Of 5 Technical And General Specification Of Hrsg12/21/32 Top Header Inspection Caps Cutting & Welding At M Station, Jebel Ali Pow Er Station. 1.#Title: Hrsgs Hpsh 1 & 3 Top Header Inspection Caps Cutting & Welding. 2.#Size: Top Header Caps Od: 04 Inch 3.#Quan Tity: Hrsgs: 2 Nos Caps Each Unit (3 Hrsg Units). Total 6 Nos Caps. Refer Below Table For Details Of Each Unit. S.No#Location#Mate Rial#Header No.#Cap Qty# 1#Sh-Hp3 Upper Header#P91#Hu 01#1# 2#Sh-Hp1 Upper Header#P91#Hu 03#1# 4.#Duration: 36 Hrs Per Unit & 3 Vis Its/Mobilization Required 5.#Scope Of Work: 5.1.#Mobilize Men/Equipment Within 02 Days Of Advance Notice. 5.2.#Submit Following Docu Ments To Obtain Ptw, 5.2.1.#Method Statement 5.2.2.#Risk Assessment Of The Work 5.2.3.#Toolbox Talk Report. 5.2.4.#Obtain Ptw (Permi T To Work) And Lc (Line Clearance) From Dewa. 5.3.#Conduct Site Survey And Safety Inspection, To Assess The Working Environment. 5.4 .#Ensure Site Area Is Correctly Secured And Safe To Work On In All Respects. 5.5.#Ensure Proper Hwp Is Obtained Before Start Of Work . 5.6.#If The Working Environment Is Safe, Proceed With The Following Steps. 5.7.#Mark The Inspection Caps Along With Dewa Foreman/E Ngineer For Cutting. 5.8.#Provide Necessary Fire Blanket. 5.9.#Proceed With Cutting Of Inspection Caps. 5.10.#After Cap Cutting, Dew A Will Conduct Borescope Inspection. 5.11.#Beveling Of Caps And Nozzles For Welding 5.12.#Weld The Caps. 5.13.#Rt Of The Weld Joint (Dewa#S Scope) 5.14.#Pwht Of The Weld Joint (Dewa#S Scope) 5.15.#Qualified Job Supervisor Shall Be Assigned For The Job 5.16.#Skill Ed Fabricators / Welders Shall Carry Out All The Jobs. 5.17.#Weld Joints To Be Made By Qualified Welder According To Applicable Wps & Asme Requirements. (Wps & Welder Quality Test Certificates To Be Provided Prior To Start Of The Job) 5.18.#Housekeeping And Dispos Al Of Waste To Be Done Before Site Clearance. 5.19.#De-Mobilize Men And Equipment After Completion Of The Job. 5.20.#Work Completion Report To Be Submitted. Report Shall Contain Relevant Photos. 5.21.#All Tools & Tackles Are In Contractors Scope. 5.22.#Only Prope R And Tested Tools To Be Used. 5.23.#All Power Tools Shall Have Valid 3Rd Party Test Certificates And To Be Submitted Prior To Start Of The Job. 5.24.#Welding Machine Shall Have 3Rd Party Calibration Certificate And To Be Submitted Prior To Start Of The Job. 6.#W Arranty 6.1.#The Warranty Period For The Work Shall Be One Year From The Date Of Completion Of Work Certified By Dewa. 6.2.#In Case Of Any Damage/Defect Of The Work Carried Out Under This Contract Within This Warranty Period, The Contractor Shall Attend And Carry Out The Necessary Repair Work And Rectify The Defect Within Short Period Without Affecting The Production Of Electricity And Water. 7.#General Terms & Conditions: 7.1.#The Contractor Shall Visit The Site And Be Fully Familiar With The Work Scope, Plant Access, Ma Terial Requirement, Facilities, Complexities, Safety Measures Etc., Before Submitting The Bid. Qty: Hrsgs Hpsh 1 & 3 Top Header Inspection Caps Cutting & Welding At M Station, Jabel Ali Anton Jacob - [email protected]> Standard Terms & Conditions 1) Prices Should Be Ddp Delivery Duty Paid At Dewa Stores. 2) Quotation To Be Submitted Only In Local Currency U.A.E Dirhams 3) Dewa Standard Payment Terms Is 30 Days Credit From The Date Of Acceptance Of Material 4) No Dewa Staff Or His Or Her Relatives Up To Third Degree Should Have Ownership Or Partnership In Your Company, And Your Participation In Dewa Tenders / Rfqs Should Not Constitute A Conflict Or Perceived Conflict Of Interest. Tender Link : Https://Www.Dewa.Gov.Ae/Api/Rfxdownload/2332202346