Tenders are invited for Supply, Installation, Testing And Commissioning Of Lifts At Kemsa New Warehouse

Tenders Are Invited For Supply, Installation, Testing And Commissioning Of Lifts At Kemsa New Warehouse A1.01 Lift Nomenclature A1.02 Type Of Lift A1.03 Special Requirements A1.04 No Of Lifts A1.05 Configuaration A1.06 Capacity (Occupancy) A1.07 Capacity (Weight) A1.08 Travel (M) A1.09 No. Of Stops / Openings (Installed) A1.10 No. Of Stops / Openings (Configured) A2 Drive Specifications A2.01 Drive (Motor) System A2.02 Engine Type A2.03 Speed (M/S) - Minimum A2.04 Acceleration (M/S) - Min A3 Shaft Specifications A3.02 Existing Pit Depth A4 Cabin Specifications A4.01 Car (Cabin) Access A4.02 Car (Cabin) Height A4.03 Car (Cabin) Height - Internal Clear A4.04 Car Fit-Out Decoration Allowance A4.05 Car Floor Finish Allowance A4.06 Car Walls Finish Allowance A4.07 Car Floor Display Position A4.08 Car Ventillation A4.09 Car Lighting A4.10 Buffer Rails Lift 2 - Goods / Passenger 2No. Fans Min. Led Required 1No. Simplex 1No. Simplex Shaft W =2500Mm 1No. Access 2600Mm 2600Mm 2400Mm W =2500Mm D = 3000Mm 1No. Access Factory Fitted Factory Fitted On Cop (Top) 3 Stops Machine Room-Less Vvvf 1.0M/S 0.6M/S 1No. Simplex Shaft Factory Fitted Factory Fitted Factory Fitted 1No. Simplex Item Description Lift 1 - Passenger Lift Details A3.01 Existing Shaft Dimensions D = 3000Mm Vvvf 1.0M/S 2 Stops Machine Room-Less 7.5M 2 Landings Conventional Hoist Normal 1No. 26 Pax 3 Landings 26 Pax 2000 Kgs 1No. Conventional Passenger 2000 Kgs 10.5M Normal 0.6M/S D = 1500Mm D = 1500Mm 2No. Fans Min. Required Led Factory Fitted On Cop (Top) 2400Mm Page 2 Of Lift Schedules September, 2022 Proposed Kemsa Warehouse Offices - Lift Bq A5 Door Specifications A5.01 Door Opening Type A5.02 Door Operations / Hour (Minimum) A5.04 Landing Floor Display Position A5.05 Landing Movement Indication Position A6 Landing Operating Panel A6.01 Landing Operating Panel Position A6.02 Type Of Buttons A6.03 Finish On Buttons A6.04 Braille Input On Buttons A6.05 Buttons Illumination A6.06 Arrival Gong Sound A7 Car Operating Panel A7.01 Car Cop 01 Position A7.02 Car Cop 02 Position A7.03 Type Of Buttons A7.04 Buttons Finish A7.05 Braille Input On Buttons A7.06 Buttons Illumination A7.07 Key Switch A7.08 Alarm Button A7.09 Close Door Button A7.10 Open Door Button A7.11 Arrival Gong & Floor Announcement A7.12 Intercom Speaker A8 Operation Functions A8.01 Anti Disturbance Function A8.02 Bypass Overload A8.03 Cabin Overload Indication A8.04 Landing Overload Indication A8.05 Force Closing A8.06 Advance Door Opening (Ado) Required Required A8.07 Automatic Power Off In Idle Mode A8.08 Car Call Cancellation A8.09 2Nd Car Operating Panel (Cop) A8.10 Dynamic Dispersion Standby A8.11 Releveling A8.12 Attendant Service / Manual Operation A8.13 Door Holding Button A8.14 Door Closing Time Protection A8.15 Door Opening Time Protection A8.16 Service Floor Setting A8.17 Non-Stop Service A8.18 Energy Saving Mode In Main Landing A8.19 Cabin Air Conditioning A8.20 Cabin Air Purification A8.21 Air Pressure Control System A8.22 Automatic Damping System A9 Safety Functions A9.01 Ard (Automatic Rescue Device) For Power Failure A9.02 Counter-Weight Safety Gear A9.03 Door Light Curtain Protection/Sensor A9.04 Cabin Emergency Light A9.05 Pre-Load Starting Torque A9.06 Emergency Power Operation A9.07 Emergency Alarm Function A9.08 Earthquake Protection A9.09 Anti-Burglar Function A9.10 Access Control System Required Required Not Required None But Provisions To Be In Place For Future Item Description Lift Details Lift 1 - Passenger Lift 2 - Goods / Passenger Page 4 Of Lift Schedules September, 2022 Proposed Kemsa Warehouse Offices - Lift Bq A10 Communication Functions A10.01 Intercom System A10.02 Arrival Gong & Floor Announcement A10.03 Evac/ Background Music A10.04 Arrival Lamp A10.05 Cabin Lift Floor Number Indication A10.06 Landing Lift Floor Number & Direction Indication A10.07 Voice Announcement A10.08 Fire Evacuation A10.09 Bms Interface A10.10 Cctv Provision & Cabled A10.11 Speakers Provision & Cabled A10.12 Cabin Multi-Media Information System A11 Fire Fighting Functions A11.01 Automatic Return To Pre-Setted Floor In Case Of Fire (Automatic Homing) A11.02 Second Homing A11.03 Fireman Operation A12 Group Control Functions A12.01 Group Control A12.02 Control Mode Automatic Switch A12.03 Peak Hour Control Function A12.04 Group Conrol Backup Operation A12.05 Learning Function A12.06 Lift Monitoring The Tender Validity Period Shall Be One Hundred & Twenty (120) Days. Tender Shall Provide A Tender Security: The Type Of Tender Security Shall Be In The Amount Of Kenya Shillings Three Hundred And Fifty Thousand (Ksh.350,000.00) Tender Link :