Tenders Are Invited For Acquisition of Maintenance Material (according to Notice)

1 Murr Process Controller with 1 Contact in and NF with 24VDC connection voltage (minimum 192 VDC and maximum 30 VDC) 14mA current at input with green LED indicator maximum switching voltage 250 VAC VDC and maximum output current of 6 the frequency range of 50 to 60 Hz work under temperature conditions etween 25 to 60 ¨c and have IP 20 protection have DIN EN 60715 rail assemly, have the following dimensions: 62 mm wide 90 mm high and 65 mm depth and approximate weight of 35 g have certifications from the European Community (CE), CSA Group and the marking of recognized component (UK) y Underwriters Differentiated Laoratories: Applicaility Decree 7174: non applicaility margin of Preference: Non Quantity: 10 Supply UNIT: Unit2 Red colored monolock process controller Operating voltage 220VCA Frequency of 60Hz operating current up to 20mA approximate life of 30000 hours, shine greater than 60 MCD and with size of 22 mm in diameter and 52 mm in lenh must meet IEC 6094751, have an IP54 degree of protection and have European Community Certification (CE) Differentiated Treatment: Applicaility Decree 7174: NonApplicaility Preference Margin: NonQuantity: 10unit SUPPLY: UNIT3 GREEN LED MONOLOCO PROCESS CONTROLER 60 Hz operation current up to 20MA, approximate life of 30000 hours, shine greater than 60 MCD and installation with size of 22 mm in diameter and 52 mm in lenh must meet the IEC 6094751, has a degree of IP54 Protection and have European Community Certification (EC) Differentiated Treatment: Pelidaility Decree 7174: Non Applicaility Preference Margin: Non QUANTITY: 10 Supply UNIT: UNIT4 Process Controller Type Damping Type Nitrogen with additional filling oil for cushioning At the end of the course should have a course of 135 mm and expanded (open) lenh of 380 mm the strenh supplied should e 100 n your rod should e 8 mm in diameter and your ody 19 mm in diameter your two ends must e of the look of super resistant plastic, with 85 mm hole diameter, 255 mm lenh and 13 mm tip diameter should e identical to Stailus 2033 Dife Referentiated: Applicaility Decree 7174: Non Applicaility Preference Margin: Non Quantity: 5 Supply Unit: Unit