Tenders are invited for Complete Overhauling Of Ro3 High Pressure Pump

Quotation Are Invited For Complete Overhauling Of Ro3 High Pressure Pump. Complete Overhauling Of Hp Pump Of Al Yassat Island Ro3 Plants Hp Pump Details: Sulzer (Finland, Model: Mbn25-180/12 Sl. No. 1001087 01(Pb6) Power: 110Kw Capacity:25.2 Head: 666.7M/ 65Bar Rpm:3513 Please Contact Mr. Noor (04-3229439) For Further Clarifications. 1 .0#Scope Of Work The Scope Of Work (Mandatory & Optional) For The Overhaul Of Booster Pumps And Their Accessories Of Booster Pumpin G Station. # A)#The Contractor Has To Take The Pump Assembly From Dewa Site To Their Workshop & Vice Versa. Dewa Shall Not Provide Any Transport To Shift The Same. For Loading & Unloading Contractor Can Use Dewa Overhead Crane Available At Pumping Stations In Co Ordination With The Dewa Representatives. B)#Mechanical Seal Replacement, Coupling Bush Renewal & Gland Packing Renewal, Bearing Rep Lacement As Required. C)#Overhauling Of Pump (See Annexure I-Mandatory & Ii-Optional) D)#Painting Of Pump Externally E)#Rectificatio N Of The Pump For Any Complaint Rose After Installation. F)#If Any Part Is Found Defective, The Contractor Has To Repair/Replace The Same. Available Spare Shall Be Supplied By Dewa. If Any Spare Is Not Available With Dewa The Contractor Has To Arrange The Same. Ad Ditional Cost Of Spare To Be Submitted To Dewa For Approval Before Placing The Order. 2.0#Prior To Submission Of Quotation, The F Ollowing Shall Be Determined Carefully: A)#The Contractor Shall Visit The Site And Make Himself Fully Familiar With The Work Scope, Plant Access Facilities, Complexities, Etc., Before Submitting The Quotation. B)#Dewa Will Not Accept Any Claim For Extras Beyond The Order Rates / Prices During And After The Execution Of Work Ordered. C)#The Contractor Will Be Provided With The Equipment Shut Down Program In Coordination With Operation & Maintenance Department Of Water Division. D)# The Contractor Should Submit The Time S Chedule /Bar Chart Indicating Each Activity. E)#On Completion Of The Work, The Inspection Checklist Of Quality Procedures, Wherever Applicable Should Be Filled In And Submitted. F)#Site Supervision, Co-Ordination Of Field Activities, Supply Of Required Technicia Ns, Tools, Equipments, Tackles Etc. Required For Execution Of The Contract Works Shall Be Suitably Considered. 4.0#Take Over O N Completion Of All Work Within The Scope Of The Contract, For Acceptance Of The Maintenance Work, Contractor Shall Notify Dewa In W Riting. A Certificate Of Completion Will Be Issued By Dewa On Final Inspection Only When The Contract Work Is Deemed To Have Been Ta Ken Over By Dewa After Necessary Condition Monitoring Checks Wherever & Whenever Required. 5.0#Warranty A)#All The Work Carried Out Shall Carry A Warranty For 8000 Hours Of Operation Or 1 Year Whichever Is Earlier. B)#The Guarantee Will Take Effect From The D Ate Of Takeover By Dewa Of The Job Carried Out By The Contractor. C)#When A Defect Is Noticed During The Period Of Warranty, The Co Ntractor Must Rectify The Defect Within A Reasonable Amount Of Time Fixed By Dewa With No Claim Or Compensation. 6.0#Documents: # On Satisfactory Completion Of The Work & Handing Over, The Contractor Should Submit The Following To Dewa. ## A)#Inspection Report. B)#Overhaul Report. C)#Job Completion Report For Jobs Other Than Routine Inspection & Overhauls D)##As-F Itted# Bill Of Materials For Consumption Of Spares E)#Requisition For Planning Of Spares By Dewa Based On Current Condition Of The Equipment For Which Maintenance Work Was Taken Up. Annexure # I Detail Scope Of Work (Mandatory) For Overhaul The Booster Pum P Of Pumping Station Sl.No#Activity#Remarks# 01#Dismantling Of The Pump#Dismantling Of The Pump As Per Dewa Engineer#S Instructio N# ##Pump Shall Be Removed As Per Sequence With Skilled Workmanship & Care.# 02#Overhauling Of Pump#The Contractor Shall Dismantle The Complete Rotating Assembly At Their Workshop And Record All Findings In A Track Sheet With Photographs Of Deteriorated Components .# ##The Contractor Has To Check For Shaft Straightness And Identify Worn-Out Areas If Any. Reconditioning Of The Shaft Shall Be Car Ried Out In Compliance With The Latest Standards & Procedures.# ##The Contractor Has To Check The Impeller Thoroughly For Any Recond Itioning Required. # ##Bearing Condition To Be Checked & Replace The Bearings If Required. # ##Mechanical Seal / Gland Sleeve Condit Ion To Be Checked & To Be Replaced If Required.# ##Wear Rings Dimensions To Be Checked For Clearance & To Be Replaced If Required.# ##If Any Part Is Found Defective, The Contractor Has To Repair/Replace The Same. Qty: 1 Complete Overhauling Of Ro3 High Pressure Pump (P6b) Sr No. 100108701 And Feed Pump (P2a) Sr No. 100108693 For Al Yassat Island Standard Terms & Conditions 1) Prices Should Be Ddp Delivery Duty Paid At Dewa Stores. 2) Quotation To Be Submitted Only In Local Currency U.A.E Dirhams 3) Dewa Standard Payment Terms Is 30 Days Credit From The Date Of Acceptance Of Material 4) No Dewa Staff Or His Or Her Relatives Up To Third Degree Should Have Ownership Or Partnership In Your Company, And Your Participation In Dewa Tenders / Rfqs Should Not Constitute A Conflict Or Perceived Conflict Of Interest. Tender Link : Https://Www.Dewa.Gov.Ae/Api/Rfxdownload/2332201690