Tenders Are Invited For Replacement Of Overhead Bridge Cranes For Winnipeg Fleet Maintenance Buildings

Replacement Of Overhead Bridge Cranes For Winnipeg Fleet Maintenance Buildings - Full Title:&Nbsp;Replacement Of Overhead Bridge Cranes For Winnipeg Fleet Maintenance Buildings - 195 And 215 Tecumseh Streetd2. &Nbsp; &Nbsp; &Nbsp; &Nbsp; &Nbsp;Scope Of Workd2.1 &Nbsp; &Nbsp; &Nbsp; &Nbsp;The Work To Be Done Under The Contract Shall Consist Of Replacement Of Overhead Bridge&Nbsp;Cranes For City Of Winnipeg Fleet Management Maintenance Buildings Located At 195 Tecumseh Street&Nbsp;And 215 Tecumseh Street.D2.2 &Nbsp; &Nbsp; &Nbsp; &Nbsp;The Funds Available For This Contract Are $290,000.00 (Mrst Included, Gst Extra).D2.3 &Nbsp;The Major Components Of The Work Are As Follows:(A) &Nbsp; The General Contractor Shall Survey The Entire Length Of The Crane Runways To Ensure Proper&Nbsp;Clearances May Be Maintained For All Motions And Operations.(B) &Nbsp; Clearance Shall Be Maintained Between The Cranes And The Building, As Well As Cranes&Nbsp;Operating At Different Elevations, Under Normal Operating Conditions.(C) &Nbsp; &Nbsp;Clearance Shall Be Maintained Between The Cranes And The Building, As Well As Parallel&Nbsp;Running Cranes, Under All Normal Operation Conditions.(D) &Nbsp; The Overhead Cranes Shall Include All Hoists, Bridge Beams, End Trucks And Controls As&Nbsp;Specified Herein.(E) &Nbsp; The New Cranes Shall Be Installed On Existing Crane Runway Beams.(F) &Nbsp; &Nbsp;Crane Components Shall Be Prime Painted Then Receive Two Coats Of Paint As Specified.(G) &Nbsp; The Cranes Shall Be Assembled In The Manufacturer’S Plant According To Manufacturer’S&Nbsp;Standards.(H) &Nbsp; After The New Cranes Are Installed On The Runway And Before Being Placed In Service, They&Nbsp;Shall Be Fully Inspected And Tested To Ensure Compliance With The Applicable Of The Specifications&Nbsp;And Applicable Standards.(I) &Nbsp; &Nbsp; The Crane Supplier Shall Include All Assembly, Field Wiring, Installation And Starting Up&Nbsp;Procedures.(J) &Nbsp; &Nbsp; The Cranes Shall Be Provided With All Necessary Lubrication Fittings At All Bearings,&Nbsp;Gears, Etc.In Accordance With Crane Manufacturer’S Recommendations.(K) &Nbsp; &Nbsp;Mechanical Design Includes Bridge Drives, Gearing, Bearings, Bridge Brakes, Under Running&Nbsp;Bridge Wheels, Bumpers And Stops.(L) &Nbsp; &Nbsp; The Bridge Drives Shall Consist Of Motor Or Motors Driving Through A Suitable Reduction&Nbsp;Unit Or Units To The Wheels Located At Each End Of The Bridges.(M) &Nbsp;All Electrical Equipment, Conduit And Wiring Shall Be Furnished As Specified Herein.(N) &Nbsp; All Bridges And Trolleys Shall Be Furnished With Reversing Control Systems Incorporating&Nbsp;Plugging Protection.(O) &Nbsp; Electrical Equipment Includes Motors, Brakes, Controllers, Resistors, Protection/Safety&Nbsp;Features. Floor Mounted Pendant Pushbutton Stations, Limit Switches, Runway Conductor System,&Nbsp;Remote Controls, Wireless Data Exchange, Collision Avoidance System And Led Lighting, As Specified&Nbsp;Herein.(P) &Nbsp; General Contractor To Provide Project Closeout Submittals Of Two (2) Copies Of The Operation&Nbsp;And Maintenance Manuals, As-Built Construction Drawings Describing The Installation,&Nbsp;Electrification Operation And Maintenance Of The Cranes Including Product Data Spare Partsinformation.(Q) &Nbsp; Final Clean-Up Of All Areas Affected By The Demolition And Construction Work.D2.4 &Nbsp; &Nbsp; &Nbsp; &Nbsp;The Following Shall Apply To The Services:(A) &Nbsp; Universal Design Policyhttp://Clkapps.Winnipeg.Ca/Dmis/Docext/Viewdoc.Asp?Documenttypeid=2&Amp;Docid=3604&Nbsp;