Tenders Are Invited For Purchase Of Uniforms For Summer And Winter Seasons For Employees Of Baku Urgent And Urgent Medical Care Stations For 221,500. 1 Tttys Jacket (For Winter) Checkered On Doctors Front And Back, Plain Reflective Tape On Nurse And Driver. Elongated Model. Closed With A Central Chain. The Chest Pockets Are Closed With A Placket, And The Inner Side Pockets Are Closed With A Zipper. The Sleeves Are Opened With A Chain. Sleeve Size: Long Sleeve. Color: Dark Blue, Yellow, Gray. Fabric: Blend (53% Cotton, 47% Polyester). Cold-Resistant Material: Synthetic - 2 Layers, Lining 100% Polyester Logos: 103 Emergency In Large Size On The Left Chest Pocket, On The Back ( 12.4.280 2014) Certificate Of Conformity Is Required. 850 Pieces 2 Tttys Vest (For Summer) Checkered On Doctors Front And Back, Plain Reflective Tape On Nurse And Driver. Short Model. Inner Chest Pocket And Side Inner Pockets Are Closed With Chain. Sleeve Size: Sleeveless. Color: Dark Blue, Yellow, Gray. Fabric: Blend (53% Cotton, 47% Polyester) Short Model. Cold-Resistant Material: Sintepon - 2 Layers, Lining 100% Polyester Logos: 103 Emergency In Large Size On The Left Chest Pocket, On The Back ( 12.4.280 2014) Certificate Of Conformity Is Required. 850 Units 3 Tttys Shirt (For Summer) Three-Button Collar, Left Chest Patch Pocket. Sleeve Size: Short Sleeve. Color: White (Doctors), Dark Blue (Nurses), Gray (Driver). Fabric: Knitted, Density 160 Gr/M2 Logos: On The Left Chest Pocket, On The Back In Large Size 103 Emergency Medical Aid Inscription. ( 12.4.280 2014) Certificate Of Conformity Is Required. 850 Units 4 Tttys Shirt (For Winter) Three-Button Collar, Left Chest Patch Pocket. Sleeve Size: Long Sleeve. Color: White (Doctors), Dark Blue (Nurses), Gray (Driver). Fabric: Knitted Fabric, Density 260 Gr/M2 Logos: On The Chest On The Left Pocket, On The Back In Large Size 103 Emergency Medical Assistance. ( 12.4.280 2014) Certificate Of Conformity Is Required. 850 Units 5 Tttys Pants (For Summer) Reflective Tape On The Bottom. 1 Back Patch On The Top, 2 Side Inner Pockets, 2 Pockets On The Right And Left Of The Knee. Color: Dark Blue, Gray. Fabric: Blend (53% Cotton, 47% Polyester. ( 12.4.280 2014) Certificate Of Conformity Is Required. 850 Pieces 6 Tttys Pants (For Winter) Reflective Tape On The Bottom. 1 Back Patch On The Top, 2 Side Inner Pockets, 2 Pockets On The Right And Left Of The Knee. Color: Dark Blue, Gray. Fabric: Blend (53% Cotton, 47% Polyester. Cold-Resistant Material: Sintepon - 3 Layers, Lining 100% Polyester. ( 12.4.280 2014) Certificate Of Conformity Is Required. 850 Pieces 7 Tttys Cap Cotton Gabardine, Adjustable Back Cap. Color: Dark Blue. Fabric: 100% Cotton. Logos: Tabib Logo On The Front, Azerbaijan Flag On The Left Side And 103 On The Beak. 850 Units 8 Tttys Shoes (For Winter) Shoes Should Be Suitable For Transportation For 2 Years According To Their Appearance, Construction And Purpose. Shoes Should Have A Positive Aesthetic Appearance. The Shoe Must Conform To The Relevant D ist 11373-88 And 3927-88 In Terms Of Size And Capacity. Shoes Should Be Produced In Medium And Wide Capacity. Shoes Should Be Produced In Sizes 36-48. The Width Of The Dart Edge Should Be At Least 2 Cm. A Document Confirming The Quality Indicators Of The Materials Used In Shoes Must Be Submitted. Materials Used In Shoes Should Have Antibacterial Properties. Smooth And Varnished Leather With A Natural Surface Is Used For The Upper Material Of The Shoe. The Skin Should Be Black. The Shoe Should Be Opened And Closed With A Chain Strap On The Upper Side. Leather With A Pattern On The Face Should Not Be Used In Shoes. Split Leather Should Not Be Used For The Upper Material Of Shoes. The Upper Leather Used In The Shoe Must Meet The Following Requirements. Tear Resistance: At Least 3 Kg Q; Elongation At Break: At Most 75%; Tensile Strength: At Least 14 Kgg; Moisture: Maximum 18%; Oiliness (18% In Moist Skin) 5-15%. Cr2o3 Content (18% In Moist And Non-Oily Skin): 2.5-7%, Water Absorption In Dynamic Conditions. Water Should Not Pass From The Top To The Bottom Of The Skin For 6 Hours. During This Time, The Total Water Absorption Should Be At Most 30%. For The Lining Material Of The Shoe, Leather That Meets The Requirements Of D ist 940-81 And Cotton Shoe Fabric That Meets The Requirements Of D ist 19196-93 With A Thickness Of At Least 0.8 Mm Should Be Used. Lining That Meets The Requirements Of D ist940-81 With A Thickness Of At Least 0.6 Mm For Insoles Should Only Be Made Of Natural Leather And Not Artificial Leather. In Shoes, Flexible And Thermoplastic Material With A Thickness Of At Least 1.0 Mm Should Be Used For The Toe Box. In Order To Give Rigidity To The Sole Of The Shoe, Shoe Cardboard Made Of Leather Powder, With A Thickness Of At Least 1.7 Mm, Should Be Used. A Leather Sole That Meets The Requirements Of D ist-1010-77 Must Be Used In The Shoes. The Base Is Attached To The Cover With Glue. A 2-3 Mm Thick Cojvolon Material Is Attached To The Sole Of The Foot And Heel. In This Case, The Total Thickness Of The Sole Should Be 6.6-8 Mm, The Total Height Of The Heel Should Be 35-40 Mm. Shoes Should Be 15-18 Cm From The Sole To The Throat. The Thickness Of The Leather Powder For The Main Lining Of The Shoe Is At Least 2.2 Mm Shoe Cardboard Should Be Used. Artificial Insole Material Should Not Be Used For The Main Insole Of The Shoe. The Main Filling In The Shoe Must Meet The Following Requirements In The Dry State: Tear Resistance: At Least 100Kgq/Sq.Cm; Needle Tear Resistance: At Least 35 Kgq/Sq Cm; Cracking Angle: Must Be At Least 100 Degrees: Tearing Resistance Of At Least 3 Kgq For Sewing The Outer Parts Of The Shoe; Synthetic Thread With A Mesh Count Of At Least 3 Times Should Be Used. The Shoe Must Conform To D ist 23251-83 Or Other State-Of-The-Art Method Of Fixing The Sole. The Fastening Strength Of The Upper And Sole Parts Of The Shoe Must Comply With The Requirements Of D ist 447-91 And 21463-87. The Quality Indicators Of The Shoe Must Meet The Requirements Of D ist 28371-89, 447-91, Etc. The Height Of The Shoe And The Heel Must Comply With The Requirements Of D ist 447-91. A Certificate Of Conformity ( 11373-88) Is Also Required. 850 Units 9 Tttys Shoes (For Summer) Basic Requirements For Making Black Summer Shoes. The Appearance Of The Shoe Should Be Suitable For Transportation For A Period Of 2 Years According To Its Construction And Purpose. Shoes Should Have A Positive Aesthetic Appearance. According To The Size And Capacity, The Shoe Should Conform To The Relevant D ist 11373-88 And 3927-88. The Shoe Should Be Produced In Medium And Large Capacity. The Shoe Should Be Produced In Sizes 36-48. The Width Of The Dart Edge Should Be At Least 2 Cm. A Document Confirming The Quality Indicators Of The Materials Used In The Shoes Should Be Presented. The Materials Used In The Shoes Should Have Antibacterial Properties. Smooth And Varnished Leather With A Natural Surface Is Used For The Upper Material Of The Shoe. The Leather Must Be Black In Color. The Leather With A Pattern On The Surface Must Not Be Used. The Split Leather Must Not Be Used For The Upper Material Of The Shoe. The Upper Leather Used In The Shoe Must Meet The Following Requirements. Tensile Strength: At Least 3 Kgq; Elongation At Break: Maximum 75%; Tear Resistance: Minimum 14 Kgg; Moisture Content: Maximum 18%; Fat Content (18% On Wet Skin) 5-15%; Wicking Under Dynamic Conditions. Water Should Not Pass From The Upper Side To The Lower Side Of The Skin For 6 Hours. During This Time, The Total Water Absorption Should Be At Most 30%. Leather That Meets The Requirements Of D ist 940-81 With A Thickness Of At Least 0.8 Mm And Cotton Shoe Piece That Meets The Requirements Of D ist 19196-93 Must Be Used For The Lining Material Of The Shoe. Natural Leather Must Not Be Used For The Lining Material Of The Shoe. Lining Leather That Meets The Requirements Of D ist 940-81 Of 0.6 Mm Should Be Used. Artificial Leather Should Not Be Used For The Insole. Elastic And Thermoplastic Material With A Thickness Of At Least 1.0 Mm Should Be Used For The Toe Box In The Shoe. Shoe Cardboard Made Of Leather Powder With A Thickness Of At Least 1.7 Mm Should Be Used To Give Rigidity To The Sole Of The Shoe. The Shoe Should Meet The Requirements Of D ist-1010-77 A Responsive Leather Sole Should Be Used. The Base Is Attached To The Cover With Glue. The Bottom Of The Sole And The Bottom Of The Sole Are Glued From 2-3 Mm Thick Cojvolon Material. In This Case, The Total Thickness Of The Sole Should Be 6.6-8 Mm, The Total Height Of The Heel Should Be 35-40 Mm. Should Be Used. Artificial Insole Material Should Not Be Used For The Main Insole Of The Shoe. The Main Insole In The Shoe Must Meet The Following Requirements In The Dry State: Tear Resistance: At Least 100 Kgq/Sq.Cm; Needle Tear Resistance: At Least 35 Kgq/Cm; Cracking Angle: Must Be At Least 100 Degrees: The Tear Resistance For The Stitching Of The Upper Parts Of The Shoe Is At Least 3 Kgg; A Synthetic Thread With A Mesh Count Of At Least 3 Layers Should Be Used. The Shoe Should Conform To D ist 23251-83 Or Other Most Modern Method According To The Method Of Fixing The Sole. The Fastening Strength Of The Upper And Sole Parts Of The Shoe Must Comply With The Requirements Of D ist 447-91 And 21463-87. The Quality Indicators Of The Shoe Must Meet The Requirements Of D ist 28371-89, 447-91, Etc. The Height Of The Shoe And The Heel Must Comply With The Requirements Of D ist 447-91 And 21463-87. A Certificate Of Conformity ( 11373-88) Is Also Required. 850 Units. Tender Fees: Azn 250/- Non Refundable. [Disclaimer: The Above Text Is Machine Translated. For Accurate Information Kindly Refer The Original Document.] Tender Link :
