Tenders Are Invited For Custom Work Boat-over 21 feet

Custom Work Boat-over 21 feet Boat should be built with the following capabilities and specifications:· &&&& Ability to safely deploy buoys and mooring weights weighing up to 500 lbs. measuring as large as 4 ft. tall x 3 ft. wide using an electronic davit crane or similar equipment in coastal and reservoir environments. Please specify recommended hull design (e.g., pontoon, modified v-hull, flat bottom, etc.) to best fit this application. Please provide all specs regarding lifting capacity, lifting speed, max lift height above deck, length extending past gunnels, and method of deployment e.g. off the bow, starboard, and/or port of boat·&&&&&&&& Minimum cargo capacity of 2,400 lbs. in addition to weight of boat motor, anchoring system, fuel, etc.·&&&&&&&& Ability to retrieve mooring weights off the seafloor and with sufficient power to pull mooring weights that have sunken into the sediment·&&&&&&&& Customized aluminum docking mount for stowing buoys on deck using davit crane or similar equipment to load buoys into docking mountor·&&&&&&&& For pontoon boat builds, a cut-out portion of the foredeck for stowing buoys using a davit crane or similar equipment with a removable decking cover·&&&&&&&& Aluminum boat constructed of 3/16” aluminum·&&&&&&&& Ability to operate in 1-2 ft. water depths·&&&&&&&& Hydraulic Jack Plate with self-contained hydraulic pump system (no reservoirs) and appropriately sized to outboard. Please provide specifications, make, and model of proposed jack plate.·&&&&&&&& 4-stroke, Minimum 250 HP, or such HP necessary for the boat to be fully capable of conducting intended operations, while fully laden, at normal operating speeds. Available outboard service & repair in the Austin area is preferred. Please provide specifications, make, and model of proposed outboard.·&&&&&&&& 12 position breaker panel·&&&&&&&& LED navigation and anchor lights·&&&&&&&& Hydraulic steering rated such that the boat’s outboard horsepower coincides with the minimum operating range for the& & & hydraulic pump. Please provide specifications, make, and model of proposed hydraulic steering system.·&&&&&&&& Aluminum tandem trailer with brakes, if necessary. Please provide specifications, make, and model of proposed trailer.·&&&&&&&& Power-Pole or similar anchor system. Please provide specifications, make, and model of proposed anchor system.·&&&&&&&& T-Top·&&&&&&&& Flush deck with rubber flooring·&&&&&&&& Bow and side rails measuring 26” high with removable side rails·&&&&&&&& Leaning post with upholstered seat and back rest and ability to securely stow away cooler under seat·&&&&&&&& Two cranking batteries·&&&&&&&& Stainless steel steering wheel·&&&&&&&& Bilge pump. Please provide specifications, make, and model of proposed bilge pump.·&&&&&&&& Ability to mount computer display and GPS at cockpit&&Question and Answer Period: June 27th – June 29th, 2022All questions should be directed to TWDB Procurement& [email protected] Bid Submission Requirements:A.&&&&& Bids shall be emailed to TWDB Bid Room: [email protected] B.&&&&& Bids shall be received by Due Date: July 1, 2022 by 2:00pm Central (no late bids will be accepted)C.&&&&& Bids shall contain the following information to be accepted;a.&&&&&& Reference Bid Name, Reference Number, Due Date b.&&&&& Vendor full business name, address, city, state, and zip code;c.&&&&&& Vendor contact name, phone, and email;d.& & & &Vendor W-9 form;e.&&&&&& Description of item(s) being bid;f.&&&&&&& Quantity; g.&&&&&& Cost (broken out by quantity); h.& & & &Notification if there will be ongoing licensing or fee requirements