Contract Notice: Modernization Of The Public Lighting Of Balatonm riaf rd Exterior Lights Short Description: Public Lighting Description Of Modernization The Settlement Includes 36W Compact Fluorescent Lamps And 50-70-100-150W Na Lights, Partly Owned By K zkil Zrt. And Partly By The Contracting Authority. Demolished Lamps May Be Deposited By The Winning Tenderer, Without A Fee, At The Location Indicated By The Contracting Authority. After Dismantling (Deposification), The Contractor Arranges For The Removal, Disposal Of Waste Materials, Transported To The Owner, Transfer, Disposal Of Hazardous Materials, And Disposal Of Waste To Waste. The Luminaires Are Built On Steel Lanterns, Usually Under Network Placement. During The Modernization Of The Existing System Luminaire, The Existing Compact Fluorescent Lamp Or Tube. Instead Of Sodium Luminaires, Hofeka Tweet Led Tip. Or That Parameters Set Out In The Name Professional Specification - Technical Professional Conformity Will Be Equivalent To The Desired Performance. The Lighting Fixtures Must Come From The Same Product Line Due To The Uniform Image Of The Settlement And The Maintenance And Operational Tasks. The Product Line Must Cover The Total (15-68W) Power Range, (Product Family: The Lighter Body Product Family Is Created For A Specific Development Purpose And Is Clearly Separated From Other Product Lines.) The Main Technical Specifications For Luminaires Are: - Protection Of The Luminaire For The Optical And Fitting Space Ip66, - The Lighting Body Should Be Suitable For Designing The Lighting Corresponding To The Msz En13201 Standard, The Light Technology Data Must Also Be Provided In Eulumdat Form - The Luminaires Cow Should Be A Flat Polycarbonate Shadow, Which, By Opening A Single Unit, Will Free The Entire Lower Side Of The Light Body (Optical And Fitting Space) To Facilitate Bottom Mounting And At The Same Time The Optical And Fitting Space - The Luminaire Housing Cover Should Be Made From Pressed Aluminum Casting Of The Lighting Body, And The Corrosion Protection Is An Outdoor Uv -Standing Plastic Coating. - The Lighting Fixtures Have To Build A Cylindrical Gg Melting Insurer And The Overvoltage Protector Protecting The Network Overvoltage Swings. - The Lighting Body Must Have A Manufacturers Declaration Of Compliance And A Power Supply System. The Detailed Technical Parameters Are Contained In The Name Professional Specification - Technical Professional Conformity. During The Construction, The Position Of The Existing Luminaires Relative To The Road Does Not Change, And The Lamp Is Not Replaced. The Connection Line, Current Bond, Nullifier Knitting Should Be Replaced As Needed If The Connection Line Is Not Uv Standing Nym-J Type. The Type And Power Height Of The Luminaires To Be Placed Are Included In The Table And Trail Drawings Attached To The Design. During The Construction, This Should Be Fitted With The Luminaires. Luminaires Construction, Light Construction: Balaton Utca: 3Pcs 20W Lk 060 On Faculty, Due To The Smoothness Requirements. R k czi U. Column 28, 1Pcs 20W Ln 060 On The Arms Due To The Smoothness Requirements. Ak cfa Street 14Th Column To Build Ln060. rv cska Street 7Pcs In322 To Be Built, Over Network, Voltage Required The Owners Owners Contribution Has Been Made To The Implementation Of The Owner Of The Active Luminaires. Ownership Of The Contractor Is Entitled To Dismantle The Luminaires. Deadline For Submission: 20220523 12:00 Type Of Buyer: Regional Or Local Authority Type Of Contract: Supplies Type Of Procedure: Open Procedure Regulation: European Union Type Of Bid: Submission For All Lots Award Criteria: The Most Economic Tender [Disclaimer: The Above Text Is Machine Translated. For Accurate Information Kindly Refer The Original Document.]
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
