GTR 50253601
Tenders are invited for Supply & Commissioning Of Vehicles
ICB — International Competitive Bid
Closed
Eastern Africa
Tender Information
GTR Reference
50253601
Tendering Authority
Subscribe to view
Tender No
MCCPL/IFB/2022/133
Financer Name
Self-Funded
Work Title
Tenders are invited for Supply & Commissioning Of Vehicles
Bid Type
ICB — International Competitive Bid
Country
Subscribe to view
Geographical Region
Eastern Africa
Political Region
Common Market for Eastern and Southern Africa COMESA,African Solidarity Fund FSA,African Union
Last Date of Bid Submission
09-05-2022
Closed
Work Detail
Tenders Are Invited For Supply & Commissioning Of Vehicles 1 Dump Truck(Fully Factory Built) 2 Unit Mechanical Workshop, Abbattoir Road, Roche Bois 4 Months 5 Months 2 Low Bed Towing Truck With Locally Manufactured Rear Ramps 1 Unit 3 Months 4 Months 3 Skid Steer Loaders On Pneumatic Tyres Complete With Attachment 2 Unit 3 Months 4 Months 4 Pickup Van-Double Cab With Rear Cargo Bed 2 Unit 2 Months 3 Months 5 Universal Tyre Changer 1 Unit 2 Months 3 Months Make Bidder To Specify Model Bidder To Specify Country Of Origin Bidder To Specify Engine Diesel And Water- Cooled Engine Capacity 4200-4600Cc Naturally Aspirated Payload- 3000 4000 Kg (Calculation To Be Given) Steering Right Hand Drive, Power Assisted And Preferably Adjustable Transmission Manual With Five Or More Forward, Reverse Chassis Chassis Shall Be Suitable For Dump Application. Gross Vehicle Weight 7000-8000 Kg Dimensions Overall Length: 5000 5500 Mm Overall Width: 2000 2200 Mm Short Wheelbase 2500 2800 Mm Speed Limiter To Be Fitted As Per Ntla Regulations And Comply With Bs Au 217 Or Approved Equivalent Power Take Off Factory Fitted To Meet Requirements Of The Tipper Mechanism And Payload And To Be Actuated From Cabin. Tipper Mechanism Scissor Type Tipper Mechanism With Tipping Angle Of 50 To 60 Degrees And Capacity Not Less Than Payload Including Weight Of Dump Body. To Specify Make, Model, Capacity And Provide Leaflet Clearly Indicating The Model Proposed. Factory Design, Factory Built And Factory Fitted Complete With Sub-Frame Assembly, Power Take Off Control And Dump Lever To Be Equipped With All Required Locks And Devices For Safe Operation. Brake Hydraulic Dual Circuit Auxiliary Exhaust Brake Parking Brake Mechanical Type Cabin (I) Seating Capacity For Driver + 2, All With Seat Belts (Ii) Original Interior And Exterior Rear View Mirrors (Iii) Am/Fm Radio, Heater/Defroster (Iv) Heavy Duty Rubber Mats To Cover Completely The Cabin Floor (V) Tilt Type Preferably (Vi) Instruction Panel With All Warning Indications (Vii) Air Conditioner Rear Lights Suitably Located, Mounted And Protected With Galvanized Grilles Accessories I) Spare Wheel Suitably Located And Secured On Wheel Carrier For Easy Access And Manipulation. Ii) Appropriate Hydraulic Jack Of About 4T Capacity, Complete With Lever And Wheel Spanner Iii) Warning Triangular Reflectors, Yellow Chalk And Standard Forms. Iv) 2Kg Dry Powder Fire Extinguisher Suitably Mounted Within DriverS Reach As Per Ntla Regulations V) Revolving Beacon Lamp Or Led Flashing Light On Cab With Covered Galvanized Grilles Vi) Rear Warning Sign + Fluorescent Reflective Band As Per Ntla Regulations. Vii) Two Fog Led Lamps At Rear With Galvanized Grilles Viii) One Set Of Standard Tools Complete With Tool Box Ix) First Aid Box For Seven Persons Appropriately Fixed In Cabin. X) Lockable Fuel Tank Cap And Hydraulic Oil Tank Cap Where Applicable. Xi) Warning Buzzer For Reverse Gear (Xii) Other Standard Accessories To Be Supplied. Bidder To Mention. Guards Front Heavy Duty Original Mud Guards With Mud Flaps As Per Ntla Regulations Rear Heavy Duty Galvanized Mud Guards With Mud Flaps As Per Ntla Regulations. Rear Under Run Protection And Side Guards As Per Ntla Regulations. Dump Body Heavy Duty Dump Body To Be Factory Built And Factory Fitted Tipper Mechanism Sub Frame To Be At Least 75 Mm Height Dump Body Mainframe To Be At Least 75 Mm Height Length Of Body To Be About 3000 Mm Height Of Dump Body Side Panels Shall Be Minimum Of 300 Mm And At Least 2 Mm Thickness Flooring To Be Of Minimum 3Mm Thickness Tail Gate: To Be Hinge From The Top And Heavy Duty Locking Device Below Tarpaulin Cover With Metal Eyelets Of Appropriate Dimension Complete With Nylon Rope To Be Provided To Cover Whole Rear Body And Galvanized Hooks To Be Fixed On Both Sides Panels Drawings Bidder To Submit Detailed Drawings Of Propose Truck And Tipper Mechanisms With Dump Body. Painting Appropriate Etch Primer For Galvanized Material And Undercoat To Be Applied Prior To Finish Colour. Cabin White Chassis- Black
Key Value
Tender Value
Ref. Document
Tender Documents
Global Tender Document
7e73bd4c-7fe9-4249-b0cd-c8182ba6fb05.zip
Attachments
Additional Details Available on Click
- Tendering Authority
- Publication Document (Tender Document / Tender Notice)
Disclaimer
We take all possible care for accurate & authentic tender information. However, users are requested to refer to the original Tender Notice / Tender Document published by the Tender Issuing Agency before taking any decision regarding this tender.