Tenders Are Invited For Hrsg 73 Dd Hydraulic Cylinder Removal, Overhaul, Testing, Certification & Refitting Work

Quotation Are Invited For Hrsg 73 Dd Hydraulic Cylinder Removal, Overhaul, Testing, Certification & Refitting Work Hrsg 73 Dd Hydraulic Cylinder 1032201177Rfx Description Hrsg 73 Dd Hydraulic Cylinder Remoaval,Overhaul , Testing, Certification <(>&<)> Refixing Work During At L1. Contact Nadeem Anjum Tel: 04-81-40678 /0509124804 1 Item-00001 Technical And General Specification Of Work At L1 Stn, Jebel Ali Power Station. Title: Removal, Refurbishment, Testing And Refixin G Of Diverter Damper Hydraulic Cylinder At Posistion, Piston Rod Dia 4 1/2", Stroke Length 56# , Qty 8 No (Four Number From Hrsg 73) Duration And Schedule Of Work:- Duration Of The Work Shall Be 04 Days Tentative Start Date Given Below, Hrsg# 73#- Starts From 01/0 5/2022 Scope Of Work 1.#The Contractor Shall Visit The Site And Make Himself Fully Familiar With The Work Scope, Plant Access, Faci Lities, Complexities, Safety Measures Etc., Before He Submit Of His Bid. 2.#Submit Detailed Schedule And Risk Assessment / Method St Atement Of The Work In Advance To Dewa. 3.#Obtain Gate Pass For The Staffs And Permit To Work (For This Contractor Has 4 Ea To Submit The Necessary Gate Entry Pass Documents, To Dewa Engineer Well In Advance) 4.#Mobilize Skilled Manpower, Tools, Rigging Tools, & Specia L Tools #Etc. To Dewa, Jebel Ali Site Within A Day Of Notice. 5.#Conduct Daily Tool Box Talks Prior To Start Of Work. 6.#Prior To St Art The Work, Proper Physical Inspection To Be Carried Out And Report Any Issue/Observation To The Dewa Representative. 7.#Disconnec T The Hydraulic Hoses From The Cylinder And Replace All The Cylinder Hoses With New (Hose Supply By Dewa). Remove The Cylinder From The Position And Shift From Top Side To Ground Floor. 8.#Transport The Cylinders From Dewa L1 Station To Contractor Workshop. 9.#Dis Mantling, Cleaning, Inspection Of Hydraulic Cylinder#S Internal Parts. 10.#Preparation Of The Internal Inspection Report With Suppor Ting Photographs And Sent To Dewa Engineer For Review. 11.#Trueness Checking Of The Piston Rod. 12.#Honing Of Cylinder Tube And Chro Ming Of The Piston Rod If Required To Be Done As An Option Line Item#2. 13.#Polishing Of The Piston Rod. 14.#Assembling Of Cylinder Using The Oem Repair Kit Supplied By Dewa. 15.#Testing Of Cylinder In Presence Of Dewa Representative And Use Oil Hydraunycoil Fh 4 551 Product Code: Fh 45 For Cylinder Testing. 16.#As Per Oem Recommendation Pressure Drop 2 Bar Maximum For 10 Minutes. Test Proced Ure To Be Provided, At 250 Bar The Acceptance Criteria For The Pressure Drop Should Be Less Than 2 Bar Within 10 Minutes. 17.#Graph Recorder To Be Used During The Test. 18.#Punching The Unique Number On The Cylinder, And Mention The Same Unique Number In The Repor T If Oem Serial Number Is Not Mentioned On The Cylinder. 19.#Providing Test Certificate With One Year Warranty. 20.#Delivery Back To Dewa Within 4 Days 21.#Reinstallation Of Cylinder On Site And All The New Hydraulic Hoses To Be Fixed Back And Hosed O Ring Shall B E Replaced With New One (O Ring To Be Supplied By Contractor And Hoses Shall Be Supplied By Dewa). 22.#Submitting Full Repairing Rep Ort & Test Certificates To Dewa Representative (Work Completion Report). 23.#Invoice Shall Be Processed Based On The Actual. Dewa S Cope Of Supply ##Repair Kit ##Scaffolding If Required General Terms & Conditions Technical Safety During The Work: ·#Contracto R Staff Must Have Valid Gate Pass Before Entering The Plant Premises. ·#Contractor Shall Give Daily Tool Box Talk, Risk Assessment A Nd Dynamic Risk Assessment To Their Staffs. ·#Contractor Staff Involved In Any Activity Shall Confirm The Availability Of Line Clear Ance (Lc) And Permit To Work (Ptw) Before Start Of Any Work. ·#Contractor Staff Must Check And Verify Of The Isolations Before Start Ing Of Any Overhauling Work. ·#The Contractor Shall Check The Condition Suitable To Carry Out The Work. Conduct Site Survey And Safe Ty Inspection To Assess The Working Environment. ·#Contractor Shall Ensure Housekeeping Is Done On Daily Basis. ·#Contractor Site Su Pervisor Shall Be Continuously Present At The Work Site To Supervise The Job. ·#The Contractor Must Engage A Qualified Safety Office R To Ensure Observance Of Safety And Safe Working Practices By His Men At Site At All Time. The Safety Supervisor Shall Keep All Rec Ords (Tbt, Risk Assessment, Hot Work Permit, Ptw, Msds, All Safety Related Documents#). ·#Contractor Staff Involved In Any Activity Shall Use Appropriate Ppes Including Gloves, Helmet, Goggles, Safety Shoe And Mask Etc. ·#Contractor Staff Shall Use Full Body Safet Y Harness When Working At Height. ·#Only Tested And Certified Rigging Tools Shall Be Used During The Work. All The Rigging Tools Mus T Have Valid Test Certificates And It Must Be Produce To Dewa Foreman/ Engineer Upon Request. ·#Contractor Must Be Ready With All Re Quired Resources To Execute The Work As Per Agreed Scope Work During The Outage Schedule To Avoid Any Delay. ·#Daily Hot Work Permit Is Required Before Start Of Any Hot Work Like Welding/ Cutting/ Grinding/Drilling/Heating Etc. ·#During Welding / Cutting, Ensure T Hat Welding Spark / Cutting Materials Shall Not Fall On Nearby Equipment. Adequate Fire Blankets Shall Be Used During Welding And Cu Tting Work. ·#No Any Hot Work Shall Be Started Without Getting Hot Work Permit And Without Fire Extinguisher Near The Work Location. ·#Daily Confined Space Work Permit Is Required Before Start Of Any Work Inside Confined Space ·#Contractor Shall Ensure No Disturba Nce To The Nearby Operating Plant / Equipment. ·#Contractor Is Responsible For Any Damage Or Effect On Installed Or Operating Machin Es /Equipment/ Properties. ·#Ensure Proper Handling Of Materials, Tools. Suitable Belts Are To Be Worn To Avoid Tools From Falling. ·#Safety Signs Shall Be Provided At Work Site And Wherever Required The Area Is To Be Barricaded For Safety And To Prevent Unauthori Zed Entry. ·#Contractor Staff Are Allowed To Work Only In The Authorized Work Place Designated By Dewa. ·#Contractor Staff Are Requi Red To Wear Their Company Uniform & Carry Their Gate Pass Ids During The Work Inside Dewa Premises. ·#All The Safety And Security Pr Ocedures Of Dewa Shall Be Strictly Adhered. ·#In Case Any Accident/Near Miss/ Abnormality, Shall Be Immediately Reported To Dewa For Eman/ Engineer. ·#The Contractor Must Engage A Certified & Experienced Rigger For All Lifting Activities ·#Contractor Shall Keep Val Id Welder Certificate, Rigger Certificate, Welding Machine Certificate, Power Tools Testing Certificate At Site And Shall Be Produce To Dewa Foreman/ Engineer Upon Request. ·#Contractor Shall Keep The Msds For The Consumables (Crc/ Wd 40 Etc.) Used At Site. ·#All The Welding Matching Power Cables, Welding Cables, Power Cables Must Be Tested And Free From Joints. ·#Cutting Set And Flame Heating Set Must Be Equipped With Back Fire Arrester. ·#Contractor Staffs Should Not Use Expired Cutting Disc, Grinding Disc & Welding Elec Trodes ·#Contractor Supervisor Shall Inform Dewa Foreman/ Engineer/Operator Before Use Of Service Air And Service Water. ·#Contracto R Staff Should Not Use Instrument Air As It Can Cause Trip Of The Plant. ·#Contractor Staff Should Not Go To Desal Area (Or Other Ar Eas #.) For Lunch / Sitting / Sleeping #Contractor Work Must Be Started Sharply At 07:30 Am And Shall Be Continue Up The End Of Th E Day. ·#If Any Work Will Continue After 18:00 Clock And During Off Days, Ensure That Night / Holiday Permit Must Be Available. The Holiday / Night Work Permit Must Be Applied One Day Prior To The Holiday Before 10:00 Am. ·#During Holidays Contractor Shall Ensure That All The Resources But Not Limited To Sub-Contractor Manpower, Tools, Consumables, Workshop Facility And Vehicles Are Available For The Smooth Execution Of The Work. ·#Contractor Has To Commence The Work Round The Clock / Double Shift (If Required) To Complete The Job Within The Agreed Duration. Waste Segregation And Disposal Hazardous Waste Segregation And Disposal A.#Ensure That Everyone Who Might Be Exposed To Hazardous Wastes Is Aware Of Their Potential Effects And What To Do With Them. Red Bags To Be Used For Only Hazardous Waste Collection And To Be Disposed In Appropriate Bins. B.#Used Crc & Wd40/ Cans/Lubrication Cans Should B 2 Item-00001 Honing Of Cylinder Tube And Chroming Of The Piston Rod If Required To Be Done As An Option 4 Ea Standard Terms & Conditions 1) Prices Should Be Ddp Delivery Duty Paid At Dewa Stores. 2) Quotation To Be Submitted Only In Local Currency U.A.E Dirhams 3) Dewa Standard Payment Terms Is 30 Days Credit From The Date Of Acceptance Of Material 4) No Dewa Staff Or His Or Her Relatives Up To Third Degree Should Have Ownership Or Partnership In Your Company, And Your Participation In Dewa Tenders / Rfqs Should Not Constitute A Conflict Or Perceived Conflict Of Interest.