Tenders Are Invited For Supply Of Gate Valves And Knife Gate Valves

Tenders Are Invited For Supply Of Gate Valves And Knife Gate Valves For Sludge Thickeners Of Tubli Stp. Closing Date 10-04-2022 Opening Date 11-04-2022 Item: Gate Valve Application: Sludge Flow Controlling Medium: Corrosive Media (For A Sewage Treatment Plant) Scope: Supply Of Gate Valves To Tubli Stp Store Specifications: Gate Valve, Dn 200 (Dia.: 200Mm, Bolts: M20, Holes: 12 Nos.), Pn 16, L: (Face To Face): 290Mm Cast Iron/ Ductile Iron Body, Non-Rising Stem, Hand Wheel Operated Special Features To Be Included: Stem Should Be Made From Stainless Steel 316L Stem Nut Should Be Made From Brass Or Bronze Core Should Be Fully Vulcanized (No Metal Parts Should Be Exposed To The Corrosive Media) Epoxy Coating On The Bonnet (>300 Microns) Item: Knife Gate Valve Application: Sludge Flow Controlling Medium: Corrosive Media (For A Sewage Treatment Plant) Scope: Supply Of Gate Valves To Tubli Stp Store Specifications: Gate Valve, Dn 200 (Dia.: 200Mm, Bolts: M20, Holes: 12 Nos.), Pn 16, L: (Face To Face): 70Mm Cast Iron/ Ductile Iron Body, Rising Stem, Hand Wheel Operated, Wafer Type Special Features To Be Included: Stem Should Be Made From Stainless Steel 316L Stem Nut Should Be Made From Brass Or Bronze Core Should Be Fully Vulcanized (No Metal Parts Should Be Exposed To The Corrosive Media) Epoxy Coating On The Bonnet (>300 Microns) General Scope Of Works Supply Of Valves (Including Loading, Transportation, And Unloading). 12 Months Warranty From The Date Of Supply (For Whatsoever Material Defects/ Malfunctioning Parts Due To ManufacturerS Faults). Origin Certificate And/Or Material Compliance Certificate Issued By The Manufacturer. How To Participate Those Who Are Capable And Wish To Participate In The Above Tender Are Able To Get The Tender Documents Online Through The Internal Tender Services Ministry Of Works, Municipalities Affairs And Urban Planning (Works Affairs) Website Or The Bahrain E-Government (Https://Www.Bahrain.Bh) Starting From Advertising Date. Contractors Should Have A Valid Qualification License And Registered With Cost Engineering Directorate In The Ministry Of Works, Municipalities And Urban Planning And Have Commercial Register In The Same Field. (Only For Contractors And Projects Listed By The Category Mentioned Above. The Tender Is Subject To The Provisions Of The Tender Law Issued By The Legislative Decree No. 36 Of 2002, Its Amendments, And Its Implementing Regulations Issued By The Decree No. 37 Of 2002. As Per The Cabinet Edicts No.S (6-2416) Of 2017 And ( 4-2516) Of 2019 , Registered SmeS Will Be Offered A Preference Of 10% In Tenders And Auctions Related To Service Utilities Inside Purchasing Authority Premises. In Case There Is Another Applicable Preference Percentage ,The Higher Of Them Will Be Offered To Smes. The Bids Should Be Deposited In The Tender Box At The Tender Unit At 6Th Floor New Building, Ministry Of Works Municipalities Affairs And Planning As Per The Above Mentioned Date. Tenders Shall Be Submitted In One Envelope.