Tenders Are Invited For Supply Of Radio Studio Equipment

Quotation Are Invited For Supply Of Radio Studio Equipment 1. 1 Piece Digital Fm Transmitter 500 Watts (Minimum), Digital Fm Transmitter (Direct Digital Synthesis [Dds]), Compact (Under 20 Kgs), Able To Operate In Temperatures Up To 45 Degrees Celsius, Low Power Consumption Model Preferred, Web Interface For Monitoring And Programming The Transmitter, 7/16 Din Female Rf Output Conductor. 2. 1 Set Dipole Antenna System Two Pieces Of 500-Watt, Omni-Directional Dipole Fm Antenna Including Splitter, With Antenna Gain Of 4 Db Minimum. 3. 1 Set Audio Processor 4 Bands; 24-Bit, Sample Rate Up To 92 Khz (Minimum) For Both Outputs And Inputs; Differential Outputs; Analog And Digital Audio Inputs; Able To Operate In Temperatures Up To 45 Degrees Celsius Must Include Data Sheet For Proposed Equipment; Digital Aes/Ebu/Optical Inputs And Outputs; Aes/Ebu Standard, 24-Bit Resolution. Input And Output Should Be Analogue And Digital For Both Models. Io System. 4. 1 Piece Server Rack To Hold Transmitter And Audio Processor 5. 1 Piece Radio Broadcast Mixer 8 Channels (Minimum), 2 X Mobile (Sim Card, Not Voip) Communication Channel, Xlr Inputs, Headphone/Audio Jack 6. 4 Sets Headphones Around-The-Ear Closed Design, Circumaural Ear Coupling; 3.5- And 6.3-Mm Jack Plug, Sound 7. 1 Piece Headphone Amp Four Out - Capable Of Splitting Signal To Four Sets Of Headphones. 8. 4 Pieces Dynamic Microphone Output Impedance In The Range Between 50 And 400 , Xlr Output, Built-In Pop Filter, Sensitivity Under 2 Mv/Pa. 9. 4 Pieces Microphone Table Stands Stands To Accompany (And Appropriate) For The Microphones Provided Above. 10. 1 Set Studio Monitor 1 Set (Two Speakers), Approximately 5 Inch, Minimum Max Spl Of 100 Db. High End Of The Frequency Range Must Be At Least 20Khz; Xlr Jack. 11. 8 Pieces Xlr Cables 4-Meter, Male-Female Cables (Microphones To Mixer) 12. 2 Pieces 6.35Mm Cable ¼ Inch Ts Male 6.35Mm Phono Jack Straight Plug, 6 Feet Long (Mixer To Headphone Amp) 13. 2 Pieces Xlr Cables 6-Meters, Male-Female Cables (Mixer To Audio Processor) 14. 1 Piece Bnc Cable 50 Ohm, .5-Meter-Long Bnc/Bnc Male (Audio Processor To Transmitter) 15. 1 Piece Coaxial Feeder Cable (Antenna Cable) 80-Meters, ½ Inch Diameter, Connector 7/16 Din (Transmitter To Antenna) 16. 1 Set Lighting Protection Grounding Kit For Feeding Cable (1/2 Inch) 17. 1 Piece Hoisting Grip Cable ½ Inch 18. 1 Piece Cable Clamp Stainless Steel 19. 1 Roll Tape Self-Amalgamating Vulcanizing Tape 10 Meters